1 |
Development of a PAH (polycyclic aromatic hydrocarbon) formation model for gasoline surrogates and its application for GDI (gasoline direct injection) engine CFD (computational fluid dynamics) simulation An YZ, Pei YQ, Qin J, Zhao H, Teng SP, Li B, Li X Energy, 94, 367, 2016 |
2 |
An experimental study of polycyclic aromatic hydrocarbons and soot emissions from a GDI engine fueled with commercial gasoline An YZ, Teng SP, Pei YQ, Qin J, Li X, Zhao H Fuel, 164, 160, 2016 |
3 |
Development of a soot particle model with PAHs as precursors through simulations and experiments An YZ, Li X, Teng SP, Wang K, Pei YQ, Qin J, Zhao H Fuel, 179, 246, 2016 |
4 |
Cs sorption to potential host rock of low-level radioactive waste repository in Taiwan: Experiments and numerical fitting study Wang TH, Chen CL, Ou LY, Wei YY, Chang FL, Teng SP Journal of Hazardous Materials, 192(3), 1079, 2011 |
5 |
Performance of phosphoric acid activated montmorillonite as buffer materials for radioactive waste repository Wang TH, Liu TY, Wu DC, Li MH, Chen JR, Teng SP Journal of Hazardous Materials, 173(1-3), 335, 2010 |
6 |
Bridging the gap between batch and column experiments: A case study of Cs adsorption on granite Wang TH, Li MH, Teng SP Journal of Hazardous Materials, 161(1), 409, 2009 |
7 |
Cesium adsorption and distribution onto crushed granite under different physicochemical conditions Tsai SC, Wang TH, Li MH, Wei YY, Teng SP Journal of Hazardous Materials, 161(2-3), 854, 2009 |
8 |
Experimental and numerical investigations of effect of column length on retardation factor determination: A case study of cesium transport in crushed granite Li MH, Wang TH, Teng SP Journal of Hazardous Materials, 162(1), 530, 2009 |
9 |
Removal of cesium ions from aqueous solution by adsorption onto local Taiwan laterite Wang TH, Li MH, Yeh WC, Wei YY, Teng SP Journal of Hazardous Materials, 160(2-3), 638, 2008 |
10 |
Measurement and prediction of the density of aqueous multicomponent solutions involving polyethylene glycol 2000 Teng SP, Teng TT Journal of Chemical Engineering of Japan, 37(1), 40, 2004 |