| 1 |
Pore-level modeling of effective longitudinal thermal dispersion in non-isothermal flows through granular porous media
Afshari S, Hejazi SH, Kantzas A
Chemical Engineering Science, 199, 451, 2019 |
| 2 |
A thermal model to describe kinetic dispersion in rubber nanocomposites: The effect of mixing time on dispersion
Rishi K, Narayanan V, Beaucage G, McGlasson A, Kuppa V, Ilavsky J, Rackaitis M
Polymer, 175, 272, 2019 |
| 3 |
The optimization of geothermal extraction based on supercritical CO2 porous heat transfer model
Lin DTW, Hsieh JC, Shih BY
Renewable Energy, 143, 1162, 2019 |
| 4 |
Homogenized and pore-scale analyses of forced convection through open cell foams
Vijay D, Goetze P, Wulf R, Gross U
International Journal of Heat and Mass Transfer, 123, 787, 2018 |
| 5 |
Thermal performance of nanofluids in metal foam tube: Thermal dispersion model incorporating heterogeneous distribution of nanoparticles
Ameri M, Amani M, Amani P
Advanced Powder Technology, 28(10), 2747, 2017 |
| 6 |
Natural convection investigation in square cavity filled with nanofluid using dispersion model
Boualit A, Zeraibi N, Chergui T, Lebbi M, Boutina L, Laouar S
International Journal of Hydrogen Energy, 42(13), 8611, 2017 |
| 7 |
Quantification of the impact of paleoclimates on the deep heat flux of the Paris Basin
Dentzer J, Lopez S, Violette S, Bruel D
Geothermics, 61, 35, 2016 |
| 8 |
Effect of thermal dispersion on transient natural convection in a wavy-walled porous cavity filled with a nanofluid: Tiwari and Das' nanofluid model
Sheremet MA, Pop I, Bachok N
International Journal of Heat and Mass Transfer, 92, 1053, 2016 |
| 9 |
Developing convective flow in a square channel partially filled with a high porosity metal foam and rotating in a parallel-mode
Alhusseny A, Turan A, Nasser A
International Journal of Heat and Mass Transfer, 90, 578, 2015 |
| 10 |
Analysis and experimental study on thermal dispersion effect of small scale saturated porous aquifer
Liu GQ, Zhou ZF, Li ZF, Zhou YZ
Energy, 67, 411, 2014 |
