| 1 |
Benign species-tuned biomass carbonization to nano-layered graphite for EMI filtering and greener energy storage functions
Gezahegn S, Garcia C, Lai RS, Zhou XX, Tjong J, Thomas SC, Huang F, Jaffer S, Yang WM, Sain M
Renewable Energy, 164, 1039, 2021 |
| 2 |
Multiple Reference Frame-Based Extended Concentrated Wound PMSM Model Considering PM Flux Linkage and Inductance Harmonics
Dhulipati H, Mukundan S, Lai CY, Mukherjee K, Tjong J, Kar NC
IEEE Transactions on Energy Conversion, 34(2), 731, 2019 |
| 3 |
Exploring the Phase Angle of Measured Speed Harmonic for Efficient Permanent Magnet Temperature Estimation of PMSMs
Feng GD, Lai CY, Tjong J, Kar NC
IEEE Transactions on Energy Conversion, 34(3), 1475, 2019 |
| 4 |
Advanced Design Optimization Technique for Torque Profile Improvement in Six-Phase PMSM Using Supervised Machine Learning for Direct-Drive EV
Dhulipati H, Ghosh E, Mukundan S, Korta P, Tjong J, Kar NC
IEEE Transactions on Energy Conversion, 34(4), 2041, 2019 |
| 5 |
Porous Ni-3(PO4)(2) thin film as a binder-free and low-cost anode of a high-capacity lithium-ion battery
Li T, Cai R, Nie XY, Tjong J
Journal of Electroanalytical Chemistry, 835, 81, 2019 |
| 6 |
The effect of tannic acids on the electrical conductivity of PEDOT:PSS Films
Yi ZH, Zhao YB, Li PC, Ho K, Blozowski N, Walker G, Jaffer S, Tjong J, Sain M, Lu ZH
Applied Surface Science, 448, 583, 2018 |
| 7 |
Design and Optimization of Traction IPMSM With Asymmetrical Damper Bars for Integrated Charging Capability Using Evolutionary Algorithm
Mukundan S, Dhulipati H, Lai CY, Mukherjee K, Tjong J, Kar NC
IEEE Transactions on Energy Conversion, 33(4), 2060, 2018 |
| 8 |
Maximum Efficiency Control of PMSM Drives Considering System Losses Using Gradient Descent Algorithm Based on DC Power Measurement
Balamurali A, Feng GD, Lai CY, Tjong J, Kar NC
IEEE Transactions on Energy Conversion, 33(4), 2240, 2018 |
| 9 |
Clean combustion of n-butanol as a next generation biofuel for diesel engines
Han XY, Yang ZY, Wang MP, Tjong J, Zheng M
Applied Energy, 198, 347, 2017 |
| 10 |
Cure kinetics characterization of soy-based epoxy resins for infusion moulding process
Subbiah R, Tjong J, Nayak SK, Sain M
Canadian Journal of Chemical Engineering, 94(7), 1375, 2016 |
