| 1 |
A 3D-CFD study of a gamma-type Stirling engine
Kuban L, Stempka J, Tyliszczak A
Energy, 169, 142, 2019 |
| 2 |
CFD model and experimental verification of water turbine integrated with electrical generator
Borkowski D, Wegiel M, Oclon P, Wegiel T
Energy, 185, 875, 2019 |
| 3 |
Cold flow characteristics of a novel bluff body hydrogen burner
Meraner C, Li T, Ditaranto M, Lovas T
International Journal of Hydrogen Energy, 43(14), 7155, 2018 |
| 4 |
Increasing the operational capability of a horizontal axis wind turbine by its integration with a vertical axis wind turbine
Govind B
Applied Energy, 199, 479, 2017 |
| 5 |
Predicting flow and residence time in alumina digestion vessels
Whyte DS, Brown GJ, Fletcher DF
Chemical Engineering Science, 169, 212, 2017 |
| 6 |
Predicting flow and residence time in alumina digestion vessels
Whyte DS, Brown GJ, Fletcher DF
Chemical Engineering Science, 169, 212, 2017 |
| 7 |
The physical modelling and aerodynamics of turbulent flows around horizontal axis wind turbines
Abdulqadir SA, Iacovides H, Nasser A
Energy, 119, 767, 2017 |
| 8 |
CFD prediction and experimental validation of surface cathode concentration in filter press parallel plate electrolysers
Rodriguez G, Sierra-Espinosa FZ, Alvarez A, Silva S, Hernandez JA
Catalysis Today, 271, 227, 2016 |
| 9 |
Modelling turbulence with an Actuator Disk representing a tidal turbine
Nguyen VT, Guillou SS, Thiebot J, Cruz AS
Renewable Energy, 97, 625, 2016 |
| 10 |
Influence of turbulence modelling on non-equilibrium condensing flows in nozzle and turbine cascade
Patel Y, Patel G, Turunen-Saaresti T
International Journal of Heat and Mass Transfer, 88, 165, 2015 |
