| 1 |
Insights into the Bending Effect in Premixed Turbulent Combustion Using the Flame Surface Density Transport
Ahmed U, Chakraborty N, Klein M
Combustion Science and Technology, 191(5-6), 898, 2019 |
| 2 |
Impact of Combustion Modeling on the Spectral Response of Heat Release in LES
Zhang FC, Zirwes T, Habisreuther P, Bockhorn H, Trimis D, Nawroth H, Paschereit CO
Combustion Science and Technology, 191(9), 1520, 2019 |
| 3 |
Experimental study of hydrogen explosion in repeated pipe congestion - Part 2: Effects of increase in hydrogen concentration in hydrogen-methane-air mixture
Shirvill LC, Roberts TA, Royle M, Willoughby DB, Sathiah P
International Journal of Hydrogen Energy, 44(5), 3264, 2019 |
| 4 |
Effect of the turbulence intensity on knocking tendency in a SI engine with high compression ratio using biogas and blends with natural gas, propane and hydrogen
Montoya JPG, Arrieta AAA
International Journal of Hydrogen Energy, 44(33), 18532, 2019 |
| 5 |
Development of a comprehensive flame transfer function and its application to predict combustion instabilities in a dump combustor
Rani VK, Rani SL
Combustion Science and Technology, 190(8), 1313, 2018 |
| 6 |
Transport equations for reaction rate in laminar and turbulent premixed flames characterized by non-unity Lewis number
Lipatnikov AN, Chakraborty N, Sabelnikov VA
International Journal of Hydrogen Energy, 43(45), 21060, 2018 |
| 7 |
The turbulent flame speed for low-to-moderate turbulence intensities: Hydrodynamic theory vs. experiments
Fogla N, Creta F, Matalon M
Combustion and Flame, 175, 155, 2017 |
| 8 |
Turbulent Flame Speed Dependencies in Lean Methane-Air Mixtures under Engine Relevant Conditions
Wang ZY, Magi V, Abraham J
Combustion and Flame, 180, 53, 2017 |
| 9 |
Flame propagation in multiscale transient periodic flow
Aldredge RC
Combustion and Flame, 183, 166, 2017 |
| 10 |
Propagation speed of wrinkled premixed flames within stoichiometric hydrogen-air mixtures under standard temperature and pressure
Sun ZY, Li GX
Korean Journal of Chemical Engineering, 34(6), 1846, 2017 |
