1 |
Heterogeneous catalytic ozonation of naphthenic acids in water Al jibouri AKH, Wu JN, Upreti SR Canadian Journal of Chemical Engineering, 97(1), 67, 2019 |
2 |
Hydrodynamic characteristics of an aerated coaxial mixing vessel equipped with a pitched blade turbine and an anchor Hashemi N, Ein-Mozaffari F, Upreti SR, Hwang DK Journal of Chemical Technology and Biotechnology, 93(2), 392, 2018 |
3 |
Optimal control of continuous ozonation of non-biodegradable pollutants Al Jibouri AKH, Upreti SR, Wu JN Journal of Process Control, 66, 1, 2018 |
4 |
APPLICATION OF MASS BALANCE MODELS IN THE PROCESS OF OZONE REMOVAL OF NAPHTHENIC ACIDS FROM WATER Al Jibouri AKH, Wu JN, Upreti SR Canadian Journal of Chemical Engineering, 95(1), 39, 2017 |
5 |
Experimental investigation of the bubble behavior in an aerated coaxial mixing vessel through electrical resistance tomography (ERT) Hashemi N, Ein-Mozaffari F, Upreti SR, Hwang DK Chemical Engineering Journal, 289, 402, 2016 |
6 |
Analysis of mixing in an aerated reactor equipped with the coaxial mixer through electrical resistance tomography and response surface method Hashemi N, Ein-Mozaffari F, Upreti SR, Hwang DK Chemical Engineering Research & Design, 109, 734, 2016 |
7 |
Analysis of power consumption and gas holdup distribution for an aerated reactor equipped with a coaxial mixer: Novel correlations for the gas flow number and gassed power Hashemi N, Ein-Mozaffari F, Upreti SR, Hwang DK Chemical Engineering Science, 151, 25, 2016 |
8 |
Enhanced Oil Recovery with Air Injection: Effect of the Temperature Variation with Time Booran SK, Upreti SR, Ein-Mozaffari F Energy & Fuels, 30(4), 3509, 2016 |
9 |
Using discrete element method to analyze the mixing of the solid particles in a slant cone mixer Alian M, Ein-Mozaffari F, Upreti SR, Wu JN Chemical Engineering Research & Design, 93, 318, 2015 |
10 |
Characterisation of the mixing of non-newtonian fluids with a scaba 6SRGT impeller through ert and CFD Pakzad L, Ein-Mozaffari F, Upreti SR, Lohi A Canadian Journal of Chemical Engineering, 91(1), 90, 2013 |