| 1 |
CFD-DEM study of air entrainment in falling particle plumes
Chu KW, Wang Y, Zheng QJ, Yu AB, Pan RH
Powder Technology, 361, 836, 2020 |
| 2 |
Measurement and simulation of the bulk solid load on a conveyor belt during transportation
Ilic D, Wheeler C
Powder Technology, 307, 190, 2017 |
| 3 |
A coupled FEM/DEM model for pipe conveyor systems: Analysis of the contact forces on belt
Zheng QJ, Xu MH, Chu KW, Pan RH, Yu AB
Powder Technology, 314, 480, 2017 |
| 4 |
Development of new analysis methods for the characterization and classification of wet sticky ores
Plinke J, Prigge JD, Williams KC
Powder Technology, 294, 252, 2016 |
| 5 |
A model for stresses in a circular silo with an off-centre circular core, using the concept of a principal stress cap: Solution for a completely filled silo and comparison with Janssen and DEM data
Matchett AJ, Langston PA, McGlinchey D
Chemical Engineering Research & Design, 93, 330, 2015 |
| 6 |
Evaluation of dust emissions from conveyor transfer chutes using experimental and CFD simulation
Chen XL, Wheeler CA, Donohue TJ, McLean R, Roberts AW
International Journal of Mineral Processing, 110, 101, 2012 |
| 7 |
Measurement of Anisotropic Consolidation Behavior
Ittershagen T, Kwade A
Particulate Science and Technology, 29(1), 79, 2011 |
| 8 |
Calculating the flexure resistance of bulk solids transported on belt conveyors
Wheeler CA, Roberts AW, Jones MG
Particle & Particle Systems Characterization, 21(4), 340, 2004 |
