| 1 |
Beneficial use of a cell coupling rheometry, conductimetry, and calorimetry to investigate the early age hydration of calcium sulfoaluminate cement
Champenois JB, Coumes CCD, Poulesquen A, Le Bescop P, Damidot D
Rheologica Acta, 52(2), 177, 2013 |
| 2 |
Calculation and Verification for the Thermodynamic Data of 3CaO center dot 3Al(2)O(3)center dot CaSO4
Wang WL, Chen XD, Chen Y, Dong Y, Ma CY
Chinese Journal of Chemical Engineering, 19(3), 489, 2011 |
| 3 |
Stabilization of ZnCl2-containing wastes using calcium sulfoaluminate cement: Cement hydration, strength development and volume stability
Berger S, Coumes CCD, Le Bescop P, Damidot D
Journal of Hazardous Materials, 194, 256, 2011 |
| 4 |
Stabilization of ZnCl2-containing wastes using calcium sulfoaluminate cement: Leaching behaviour of the solidified waste form, mechanisms of zinc retention
Berger S, Coumes CCD, Champenois JB, Douillard T, Le Bescop P, Aouad G, Damidot D
Journal of Hazardous Materials, 194, 268, 2011 |
| 5 |
Utilization of Coal Combustion Ashes for the Synthesis of Ordinary and Special Cements
Marroccoli M, Pace ML, Telesca A, Valenti GL, Montagnaro F
Combustion Science and Technology, 182(4-6), 588, 2010 |
| 6 |
Immobilization of calcium sulfate contained in demolition waste
Ambroise J, Pera J
Journal of Hazardous Materials, 151(2-3), 840, 2008 |
| 7 |
Properties of MSW fly ash-calcium sulfoaluminate cement matrix and stabilization/solidification on heavy metals
Qian GR, Shi J, Cao YL, Xu YF, Chui PC
Journal of Hazardous Materials, 152(1), 196, 2008 |
| 8 |
Valorization of phosphogypsum as hydraulic binder
Kuryatnyk T, da Luz CA, Ambroise J, Pera J
Journal of Hazardous Materials, 160(2-3), 681, 2008 |
| 9 |
An alternative to Portland Cement for waste encapsulation - The calcium sulfoaluminate cement system
Zhou Q, Milestone NB, Hayes M
Journal of Hazardous Materials, 136(1), 120, 2006 |
| 10 |
Use of sulfoaluminate cement and bottom ash in the solidification/stabilization of galvanic sludge
Luz CA, Rocha JC, Cheriaf M, Pera J
Journal of Hazardous Materials, 136(3), 837, 2006 |
