1 |
A Nonlinear q-Axis Inductance Modeling of a 12-Slot 10-Pole IPM Using Approximate Analytical Methods Gurleyen H, Mese E IEEE Transactions on Energy Conversion, 35(2), 621, 2020 |
2 |
Conceptual Design of Fractional Slot Concentrated Winding Dual-Rotor Double-Speed Synchronous Motor Hassannia A IEEE Transactions on Energy Conversion, 35(2), 986, 2020 |
3 |
Effect of Slot-Pole Combination on the Electromagnetic Performance of Ironless Stator AFPM Machine With Concentrated Windings Wang C, Zhang ZR, Liu Y, Geng WW, Gao HM IEEE Transactions on Energy Conversion, 35(2), 1098, 2020 |
4 |
Improvement of Concentrated Winding Layouts for Six-Phase Squirrel Cage Induction Motors Rezazadeh G, Tahami F, Capolino GA, Vaschetto S, Nasiri-Gheidari Z, Henao H IEEE Transactions on Energy Conversion, 35(4), 1727, 2020 |
5 |
Investigation Into Multi-Layer Fractional-Slot Concentrated Windings With Unconventional Slot-Pole Combinations Tessarolo A, Ciriani C, Bortolozzi M, Mezzarobba M, Barbini N IEEE Transactions on Energy Conversion, 34(4), 1985, 2019 |
6 |
Torque Pulsation Reduction in Fractional-Slot Concentrated-Windings IPM Motors by Lowering Sub-Harmonics Liu GH, Zhai FF, Chen Q, Xu GH IEEE Transactions on Energy Conversion, 34(4), 2084, 2019 |
7 |
Multiobjective Design Optimization of Generalized Multilayer Multiphase AC Winding Silva AM, Ferreira FJTE, Cistelecan MV, Antunes CH IEEE Transactions on Energy Conversion, 34(4), 2158, 2019 |
8 |
A Quadratic-Programming Approach to the Design Optimization of Fractional-Slot Concentrated Windings for Surface Permanent-Magnet Machines Tessarolo A IEEE Transactions on Energy Conversion, 33(1), 442, 2018 |
9 |
Multiphysics Design of a V-Shape IPM Motor Akiki P, Hassan MH, Bensetti M, Dessante P, Vannier JC, Prieto D, McClelland M IEEE Transactions on Energy Conversion, 33(3), 1141, 2018 |
10 |
Iron Losses Calculation of an Axial Flux Machine Based on Three-Dimensional FEA Results Corresponding to One-Sixth Electrical Period Zhang B, Doppelbauer M IEEE Transactions on Energy Conversion, 32(3), 1023, 2017 |