| 1 |
In-situ dielectric cure monitoring as a method of measuring the influence of cure temperature on natural rubber vulcanization
Chueangchayaphan N, Nithi-Uthai N, Techakittiroj K, Manuspiya H
Polymer Bulletin, 78(6), 3169, 2021 |
| 2 |
Curing and thermal properties of tannin-based epoxy and its blends with commercial epoxy resin
Shnawa HA
Polymer Bulletin, 78(4), 1925, 2021 |
| 3 |
Online monitoring of the curing of adhesives with a miniaturised interdigital sensor using impedance spectroscopy
Hubner M, Dumstorff G, Mogaddam MK, Plagemann P, Lang W
Journal of Adhesion Science and Technology, 32(7), 772, 2018 |
| 4 |
Performance of Amidocoumarins as Probes for Monitoring of Cationic Photopolymerization of Monomers by Fluorescence Probe Technology
Ortyl J, Sawicz K, Popielarz R
Journal of Polymer Science Part A: Polymer Chemistry, 48(20), 4522, 2010 |
| 5 |
Novel techniques for characterization of fast-cure anisotropic conductive and non-conductive adhesives
Teo M
Journal of Adhesion Science and Technology, 22(8-9), 1003, 2008 |
| 6 |
Advanced cure monitoring by optoelectronic multifunction sensing system
Giordano M, Laudati A, Russo M, Nasser J, Persiano GV, Cusano A
Thin Solid Films, 450(1), 191, 2004 |
| 7 |
In situ cure monitoring of adhesively bonded joints by dielectrometry
Kwon JW, Chin WS, Lee DG
Journal of Adhesion Science and Technology, 17(16), 2111, 2003 |
| 8 |
Ion mobility time of flight measurements: effect of experimental parameters on measurements in a non-hydrogen bonded system
Warner J, Guo J, Khoshbin M, Raheem S, Kranbuehl DE, Seytre G, Boiteux G
Polymer, 44(12), 3537, 2003 |
| 9 |
Electro-Micromechanical 시험법을 이용한 탄소 섬유 강화 에폭시아크릴레이트 복합재료의 자외선과 열경화에 따른 경화 모니터링 및 비파괴적 계면 평가
박종만, 공진우, 김대식, 이재락
Polymer(Korea), 27(3), 189, 2003 |
| 10 |
Moisture-curing kinetics of isocyanate prepolymer adhesives
Lepene BS, Long TE, Meyer A, Kranbuehl DE
Journal of Adhesion, 78(4), 297, 2002 |
