1 |
Hot metal pressing joining of carbon fiber reinforced plastic to AZ31 Mg alloy and the effect of the oxide surface layer on joint strength Arkhurst BM, Kim JH, Lee MY Applied Surface Science, 477, 241, 2019 |
2 |
Effect of inter-plies on the short beam shear delamination of steel/composite hybrid laminates Hader-Kregl L, Wallner GM, Kralovec C, Eyssell C Journal of Adhesion, 95(12), 1088, 2019 |
3 |
에틸렌 비닐 아세테이트(EVA) 기반 접착 필름을 이용한 향상된 기계적 물성을 가진 섬유 금속 라미네이트의 간단한 제조 방법 김진구 Polymer(Korea), 43(2), 295, 2019 |
4 |
Low viscosity and high toughness epoxy resin modified by in situ radical polymerization method for improving mechanical properties of carbon fiber reinforced plastics Misumi J, Oyama T Polymer, 156, 1, 2018 |
5 |
Gasification characteristics of glass fiber-reinforced plastic (GFRP) wastes in a microwave plasma reactor Yun Ym, Seo MW, Ra HW, Yoon SJ, Mun TY, Moon JH, Kook JW, Kim YK, Lee JG, Kim JH Korean Journal of Chemical Engineering, 34(10), 2756, 2017 |
6 |
Modeling thermal NDT problems Vavilov VP International Journal of Heat and Mass Transfer, 72, 75, 2014 |
7 |
Influence of pressure and temperature on the fatigue strength of Type-3 compressed-hydrogen tanks Tomioka J, Kiguchi K, Tamura Y, Mitsuishi H International Journal of Hydrogen Energy, 37(22), 17639, 2012 |
8 |
Surface recession mechanism of carbon fiber reinforced plastic layer by thermal decomposition Lee JH, Kim KS, Kim H Korean Journal of Chemical Engineering, 29(11), 1508, 2012 |
9 |
Influence of temperature on the fatigue strength of compressed-hydrogen tanks for vehicles Tomioka J, Kiguchi K, Tamura Y, Mitsuishi H International Journal of Hydrogen Energy, 36(3), 2513, 2011 |
10 |
Forced Air Plasma Treatment (FAPT) of Hybrid Wood Plastic Composite (WPC)-Fiber Reinforced Plastic (FRP) Surfaces Oporto GS, Gardner DJ, Bernhardt G, Neivandt DJ Composite Interfaces, 16(7-9), 847, 2009 |