1 |
Reduction of RANS/LES combustion sub-models for quasi-dimensional spark ignition engine simulations and evaluation of the modelling assumptions with DNS Bardis K, Kyrtatos P, Frouzakis CE, Wright YM, Giannakopoulos GK, Boulouchos K Combustion and Flame, 220, 189, 2020 |
2 |
Effects of direct-injected hydrogen addition on methane combustion performance in an optical SI engine with high compression-ratio Zhang R, Chen L, Pan JY, Wei HQ, Zhou L, Liu CW International Journal of Hydrogen Energy, 45(4), 3284, 2020 |
3 |
Effects of enhanced tumble ratios on the in-cylinder performance of a gasoline direct injection optical engine Yang J, Dong X, Wu Q, Xu M Applied Energy, 236, 137, 2019 |
4 |
Study on the flame development patterns and flame speeds from homogeneous charge to stratified charge by fueling n-heptane in an optical engine Zheng ZQ, Fang XH, Liu HF, Geng C, Yang Z, Feng L, Wang Y, Yao MF Combustion and Flame, 199, 213, 2019 |
5 |
Flame brush thickness of lean turbulent premixed Bunsen flame and the memory effect on its development Nie YH, Wang JH, Zhang WJ, Chang M, Zhang M, Huang ZH Fuel, 242, 607, 2019 |
6 |
Reduction of flame development time in nanosecond pulsed high frequency discharge ignition of flowing mixtures Lefkowitz JK, Ombrello T Combustion and Flame, 193, 471, 2018 |
7 |
Explosion characteristics of a methane/air mixture at low initial temperatures Cui G, Wang S, Liu JG, Bi ZX, Li ZL Fuel, 234, 886, 2018 |
8 |
The effect of ethanol blending on mixture formation, combustion and soot emission studied in an optical DISI engine Storch M, Hinrichsen F, Wensing M, Will S, Zigan L Applied Energy, 156, 783, 2015 |
9 |
An evaluation of the assumptions of the flamelet model for diesel combustion modeling Ameen MM, Magi V, Abraham J Chemical Engineering Science, 138, 403, 2015 |
10 |
The characterization of heat transfer fluid P-NF aerosol combustion: Ignitable region and flame development Huang SY, Li XR, Mannan MS Journal of Loss Prevention in The Process Industries, 26(6), 1134, 2013 |