| 1 |
Study of the interfacial adhesive strength of a heat-shrinkable multilayer film
Nishitsuji S, Shinozaki C, Miyata K, Yamada S, Yoshida J
Polymer Engineering and Science, 61(3), 836, 2021 |
| 2 |
Correlation of ohmic resistance and interfacial adhesion strength between cathode and electrolyte for solid oxide fuel cells
Wang XD, Guan WB, Yu R, Liu W, Pei WL, Zhou XD
International Journal of Hydrogen Energy, 41(47), 22337, 2016 |
| 3 |
Improved mechanical performance of PBO fiber-reinforced bismaleimide composite using mixed 02/Ar plasma
Liu D, Chen P, Yu Q, Ma KM, Ding ZF
Applied Surface Science, 305, 630, 2014 |
| 4 |
Effect of secondary forces in the compatibility of two incompatible biodegradable polymers
Chou PM, Mariatti M, Zulkifli A, Todo M
Polymer Bulletin, 69(4), 455, 2012 |
| 5 |
Adhesion strength and fatigue life improvement of co-cured composite/metal lap joints by silane-based interphase formation
Kim WS, Lee JJ
Journal of Adhesion Science and Technology, 21(2), 125, 2007 |
| 6 |
Transparent ultra-hydrophobic surfaces
Rios PF, Dodiuk H, Kenig S, McCarthy S, Dotan A
Journal of Adhesion Science and Technology, 21(5-6), 399, 2007 |
| 7 |
The effects of nanostructure and composition on the hydrophobic properties of solid surfaces
Rios PF, Dodiuk H, Kenig S, McCarthy S, Dotan A
Journal of Adhesion Science and Technology, 20(6), 563, 2006 |
| 8 |
Microstructure and mechanical behavior of polyamide 66-precipitated calcium carbonate composites: Influence of the particle surface treatment
Cayer-Barrioz J, Ferry L, Frihi D, Cavalier K, Seguela R, Vigier G
Journal of Applied Polymer Science, 100(2), 989, 2006 |
| 9 |
A new understanding on the mechanism of fountain solution in the prevention of ink transfer to the non-image area in conventional offset lithography
Shen W, Hutton B, Liu FP
Journal of Adhesion Science and Technology, 18(15-16), 1861, 2004 |
| 10 |
Influence of surface treatment of carbon fibers on interfacial adhesion strength and mechanical properties of PLA-based composites
Wan YZ, Wang YL, Li QY, Dong XH
Journal of Applied Polymer Science, 80(3), 367, 2001 |
