1 |
Electrochemical impedance analysis with transmission line model for accelerated carbon corrosion in polymer electrolyte membrane fuel cells Jung J, Chung YN, Park HY, Han J, Kim HJ, Henkensmeier D, Yoo SJ, Kim JY, Lee SY, Song KH, Park HS, Jang JH International Journal of Hydrogen Energy, 43(32), 15457, 2018 |
2 |
Relationships between pore size and charge transfer resistance of carbon aerogels for organic electric double-layer capacitor electrodes Yang I, Kim SG, Kwon SH, Kim MS, Jung JC Electrochimica Acta, 223, 21, 2017 |
3 |
Measurement of protonic resistance of catalyst layers as a tool for degradation monitoring Gaumont T, Maranzana G, Lottin O, Dillet J, Didierjean S, Pauchet J, Guetaz L International Journal of Hydrogen Energy, 42(3), 1800, 2017 |
4 |
An integrative modeling and experimental study on the ionic resistance of ion-exchange membranes Zhang BP, Hong JG, Xie SH, Xia SM, Chen YS Journal of Membrane Science, 524, 362, 2017 |
5 |
Hydration and dehydration cycles in polymer electrolyte fuel cells operated with wet anode and dry cathode feed: A neutron imaging and modeling study Garcia-Salaberri PA, Sanchez DG, Boillat P, Vera M, Friedrich KA Journal of Power Sources, 359, 634, 2017 |
6 |
Honeycomb-alumina supported garnet membrane: Composite electrolyte with low resistance and high strength for lithium metal batteries Liu K, Wang CA Journal of Power Sources, 281, 399, 2015 |
7 |
Effect of Nafion ionomer and catalyst in cathode layers for the direct formic acid fuel cell with complex capacitance analysis on the ionic resistance Kim S, Han J, Kwon Y, Lee KS, Lim TH, Nam SW, Jang JH Electrochimica Acta, 56(23), 7984, 2011 |
8 |
The effects of Nafion (R) ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method Kim KH, Lee KY, Kim HJ, Cho E, Lee SY, Lim TH, Yoon SP, Hwang IC, Jang JH International Journal of Hydrogen Energy, 35(5), 2119, 2010 |
9 |
Effect of ionomer content and relative humidity on polymer electrolyte membrane fuel cell (PEMFC) performance of membrane-electrode assemblies (MEAs) prepared by decal transfer method Jeon S, Lee J, Rios GM, Kim HJ, Lee SY, Cho E, Lim TH, Jang JH International Journal of Hydrogen Energy, 35(18), 9678, 2010 |
10 |
Ionic resistance of the catalyst layer after the PEM fuel cell suffered freeze Hou JB, Song W, Yu HM, Fu Y, Hao LX, Shao ZG, Yi BL Journal of Power Sources, 176(1), 118, 2008 |