| 1 |
Influence of laser damage and contact geometry on the performance of passivated emitter and rear cell solar cells
Suh D
Thin Solid Films, 668, 45, 2018 |
| 2 |
Analysis of laser-induced damage during laser ablation process using picosecond pulse width laser to fabricate highly efficient PERC cells
Kim M, Kim D, Kim D, Kang Y
Solar Energy, 108, 101, 2014 |
| 3 |
Selective deposition contact patterning using atomic layer deposition for the fabrication of crystalline silicon solar cells
Cho YJ, Shin WC, Chang HS
Thin Solid Films, 568, 1, 2014 |
| 4 |
Fire-through contacts-a new approach to contact the rear side of passivated silicon solar cells
Thaidigsmann B, Kick C, Drews A, Clement F, Wolf A, Biro D
Solar Energy Materials and Solar Cells, 108, 164, 2013 |
| 5 |
Highly efficient PERC cells fabricated using the low cost laser ablation process
Kim M, Park S, Kim D
Solar Energy Materials and Solar Cells, 117, 126, 2013 |
| 6 |
A study on the aluminum fire-through to a-SiNx:H thin film for crystalline solar cells
Song J, Park S, Kwon S, Kim S, Kim H, Tark SJ, Yoon S, Kim D
Current Applied Physics, 12(1), 313, 2012 |
| 7 |
Local aluminum-silicon contacts by layer selective laser ablation
Haase F, Neubert T, Horbelt R, Terheiden B, Bothe K, Brendel R
Solar Energy Materials and Solar Cells, 95(9), 2698, 2011 |
| 8 |
Nonaxisymmetric drop shape analysis and its application for determination of the local contact angles
Iliev S, Pesheva N
Journal of Colloid and Interface Science, 301(2), 677, 2006 |
| 9 |
The Grenoble High Magnetic Field Laboratory
Debray F, Mossang E, Joss W
Energy Conversion and Management, 43(3), 427, 2002 |
