| 1 |
Effect of layered silicates and reactive compatibilization on structure and properties of melt-drawn HDPE/PA6 microfibrillar composites
Kelnar I, Kapralkova L, Kratochvil J, Padovec Z, Ruzicka M, Hromadkova J
Polymer Bulletin, 73(6), 1673, 2016 |
| 2 |
Strain-induced phase morphology in melt drawn ultrathin highly oriented block copolymer films
Keller T, Semmler C, Jandt KD
Macromolecular Rapid Communications, 29(11), 876, 2008 |
| 3 |
Ultradrawing above the static melting temperature of ultra-high molecular weight isotactic poly(1-butene) having low ductility in the crystalline state
Sawai D, Anyashiki T, Nakamura K, Hisada N, Ono T, Kanamoto T
Polymer, 48(1), 363, 2007 |
| 4 |
In situ SAXS analysis of extended-chain crystallization during melt-drawing of ultra-high molecular weight polyethylene
Kakiage M, Sekiya M, Yamanobe T, Komoto T, Sasaki S, Murakami S, Uehara H
Polymer, 48(25), 7385, 2007 |
| 5 |
Transient crystallization during drawing from ultra-high molecular weight polyethylene melts having different entanglement characteristics
Kakiage M, Yamanobe T, Komoto T, Murakami S, Uehara H
Polymer, 47(23), 8053, 2006 |
| 6 |
The melt processing of polymer microcapillary film (MCF)
Hallmark B, Gadala-Maria F, Mackley MR
Journal of Non-Newtonian Fluid Mechanics, 128(2-3), 83, 2005 |
| 7 |
Analysis of isothermal annular jets: Comparison of computational fluid dynamics and experimental data
Moore EM, Shambaugh RL, Papavassiliou DV
Journal of Applied Polymer Science, 94(3), 909, 2004 |
| 8 |
Influence of melt drawing on the morphology of one- and two-step processed LDPE/thermoplastic starch blends
Rodriguez-Gonzalez FJ, Virgilio N, Ramsay BA, Favis BD
Advances in Polymer Technology, 22(4), 297, 2003 |
| 9 |
Melt drawing of ultra-high molecular weight polyethylene: Comparison of Ziegler- and metallocene-catalyzed reactor powders
Nakae M, Uehara H, Kanamoto T, Ohama T, Porter RS
Journal of Polymer Science Part B: Polymer Physics, 37(15), 1921, 1999 |
