1 |
Evidence for the Heterogeneity of the Pore Structure of Rocks from Comparing the Results of Various Techniques for Measuring Hydraulic Properties Schepp LL, Renner J Transport in Porous Media, 136(1), 217, 2021 |
2 |
Experimental and numerical investigation of fluid flow hydrodynamics in porous media: Characterization of pre-Darcy, Darcy and non-Darcy flow regimes Kundu P, Kumar V, Mishra IM Powder Technology, 303, 278, 2016 |
3 |
(활성탄/고분자바인더)복합성형체의 압출온도에 따르는 응집구조 및 유량 상관성에 관한 연구 임용균, 김영준, 박상진, 홍성규 Korean Chemical Engineering Research, 52(2), 261, 2014 |
4 |
Pore-flow calculations based on pore size distributions in polyimide membranes determined by a nanoprobe imaging technique Stawikowska J, Kim JE, Livingston AG Chemical Engineering Science, 97, 81, 2013 |
5 |
Dissolution of lignocellulose in ionic liquids and its recovery by nanofiltration membrane Hazarika S, Dutta NN, Rao PG Separation and Purification Technology, 97, 123, 2012 |
6 |
Darcy's Law-Based Numerical Simulation for Modeling 3D Liquid Absorption into Porous Wicks Masoodi R, Tan H, Pillai KM AIChE Journal, 57(5), 1132, 2011 |
7 |
Effect of pressure gradient on the flow of oil and water in gel-filled pore Ganguly S Chemical Engineering Research & Design, 89(11A), 2380, 2011 |
8 |
Modeling of Nanofiltration of Dye Using a Coupled Concentration Polarization and Pore Flow Model Banerjee P, De S Separation Science and Technology, 46(4), 561, 2011 |
9 |
Pervaporative separation of furfural from aqueous solution using modified polyurethaneurea membrane Ghosh UK, Pradhan NC, Adhikari B Desalination, 252(1-3), 1, 2010 |
10 |
Numerical simulation of reactive flow in liquid composite molding using flux-corrected transport (FCT) based finite element/control volume (FE/CV) method Tan H, Pillai KM International Journal of Heat and Mass Transfer, 53(9-10), 2256, 2010 |