| 1 |
Effect of pipe inclination on internal structure of settling slurry flow at and close to deposition limit
Matousek V, Kesely M, Chara Z
Powder Technology, 343, 533, 2019 |
| 2 |
Non-invasive investigation of the cross-sectional solids distribution in CFB risers by X-ray computed tomography
Hensler T, Firsching M, Bonilla JSG, Woerlein T, Uhlmann N, Wirth KE
Powder Technology, 297, 247, 2016 |
| 3 |
SOLIDS DISTRIBUTION IN TALL TANKS
Cope RF, Somasi M, Kar KK
Canadian Journal of Chemical Engineering, 89(5), 1104, 2011 |
| 4 |
Use of piezoelectric pressure transducers to determine local solids mass flux in the riser of a cold flow circulating fluidized bed
Spenik JL, Ludlow JC
Powder Technology, 203(1), 86, 2010 |
| 5 |
Using Positron Emission Particle Tracking (PEPT) to Study Mixing in Stirred Vessels: Validation and Tackling Unsolved Problems in Opaque Systems
Barigou M, Chiti F, Pianko-Oprych P, Guida A, Adams L, Fan XF, Parker DJ, Nienow AW
Journal of Chemical Engineering of Japan, 42(11), 839, 2009 |
| 6 |
THE INFLUENCE OF DISTRIBUTOR STRUCTURE ON THE SOLIDS DISTRIBUTION AND FLOW DEVELOPMENT IN CIRCULATING FLUIDIZED BEDS
Yan AJ, Huang WX, Zhu J
Canadian Journal of Chemical Engineering, 86(6), 1023, 2008 |
| 7 |
Solids distribution and rising velocity of buoyant solid particles in a vessel stirred with multiple impellers
Fajner D, Pinelli D, Ghadge RS, Montante G, Paglianti A, Magelli F
Chemical Engineering Science, 63(24), 5876, 2008 |
| 8 |
Axial solids distribution and flow development in the risers of circulating fluidized beds with different heights
Huang WX, Yan AJ, Zhu JJ
Journal of the Chinese Institute of Chemical Engineers, 36(1), 17, 2005 |
| 9 |
Dispersion coefficients and settling velocities of solids in slurry vessels stirred with different types of multiple impellers
Pinelli D, Montante G, Magelli F
Chemical Engineering Science, 59(15), 3081, 2004 |
| 10 |
Hydrodynamics of a three-phase airlift reactor with an enlarged separator - Application to high cell density systems
Klein J, Vicente AA, Teixeira JA
Canadian Journal of Chemical Engineering, 81(3-4), 433, 2003 |
