| 1 |
Design and Computational Fluid Dynamics Analysis of a Three-Phase Decanter Centrifuge for Oil-Water-Solid Separation
Zhu MJ, Hu DP, Xu YF, Zhao SB
Chemical Engineering & Technology, 43(5), 1005, 2020 |
| 2 |
Numerical modeling and control of solids separation using continuously moving fine mesh filters
Sherratt A, DeGroot CT, Straatman AG, Santoro D
Chemical Engineering Science, 195, 881, 2019 |
| 3 |
Pilot-scale test of an advanced, integrated wastewater treatment process with sludge reduction, inorganic solids separation, phosphorus recovery, and enhanced nutrient removal (SIPER)
Yan P, Ji FY, Wang J, Fan JP, Guan W, Chen QK
Bioresource Technology, 142, 483, 2013 |
| 4 |
Chemical and biochemical variation in animal manure solids separated using different commercial separation technologies
Jorgensen K, Jensen LS
Bioresource Technology, 100(12), 3088, 2009 |
| 5 |
Use of geotextile tubes with chemical amendments to dewater dairy lagoon solids
Worley JW, Bass TM, Vendrell PF
Bioresource Technology, 99(10), 4451, 2008 |
| 6 |
A unified probabilistic approach for modeling trajectory-based separations
Wei J, Realff MJ
AIChE Journal, 51(9), 2507, 2005 |
| 7 |
Comparison of a static gravity screen-roll press combination separator to a PAM-assisted gravity belt thickener system for swine waste slurry solids separation
Walker P, Kelley T
Bioresource Technology, 96(5), 571, 2005 |
| 8 |
Separation and characterization of foulant material in coker gas oils from Athabasca bitumen
Xu Z, Wang Z, Kung J, Woods JR, Wu XA, Kotlyar LS, Sparks BD, Chung KH
Fuel, 84(6), 661, 2005 |
