| 1 |
MODEL OF THE FUEL JET PRIMARY ATOMIZATION AND AERODYNAMICS OF SPRAY FORMATION AT HIGH-PRESSURE INJECTION IN A DIESEL ENGINE
Girin OG
Atomization and Sprays, 28(3), 195, 2018 |
| 2 |
Numerical modelling of fuel spray formation and collapse from multi-hole injectors under flash-boiling conditions
Price C, Hamzehloo A, Aleiferisa P, Richardson D
Fuel, 221, 518, 2018 |
| 3 |
THE FORMATION OF DROPS FROM VISCOELASTIC LIQUID JETS AND SHEETS-AN OVERVIEW
Brenn G, Plohl G
Atomization and Sprays, 27(4), 285, 2017 |
| 4 |
The effect of nozzle geometry over the evaporative spray formation for three different fuels
Payri R, Viera JP, Gopalakrishnan V, Szymkowicz PG
Fuel, 188, 645, 2017 |
| 5 |
Spray formation of middle distillates for autothermal reforming
Peters R, Pasel J, Samsun RC, Scharf F, Tschauder A, Muller M, Muller A, Beer M, Stolten D
International Journal of Hydrogen Energy, 42(27), 16946, 2017 |
| 6 |
Transient needle motion of an outwardly opening GDI injector and its effects on initial spray formation
Komada K, Moon S
Fuel, 181, 964, 2016 |
| 7 |
Energy considerations in spraying process of a spill-return pressure-swirl atomizer
Jedelsky J, Jicha M
Applied Energy, 132, 485, 2014 |
| 8 |
A STUDY OF DROPLET COLLISION MODELLING FOR SPRAY FORMATION AND MIXING WITH A TWO-ROW GROUP-HOLE INJECTION NOZZLE FOR DIESEL ENGINES
Aleiferis PG, Ashrafi-Nik M, Ladommatos N, Dober G, Karimi K
Atomization and Sprays, 24(12), 1089, 2014 |
| 9 |
Imaging in the optically dense regions of a spray: A review of developing techniques
Linne M
Progress in Energy and Combustion Science, 39(5), 403, 2013 |
| 10 |
Imaging and heat flux measurements of wall impinging sprays of hydrocarbons and alcohols in a direct-injection spark-ignition engine
Serras-Pereira J, Aleiferis PG, Richardson D
Fuel, 91(1), 264, 2012 |
