| 1 |
Wet-milling disposal of autoclaved aerated concrete demolition waste - A comparison with classical supplementary cementitious materials
Yang J, Zeng LH, Su ZC, He XY, Su Y, Zhao RX, Gan XC
Advanced Powder Technology, 31(9), 3736, 2020 |
| 2 |
Development of thermally enhanced controlled low-strength material incorporating different types of steel-making slag for ground-source heat pump system
Kim YS, Dinh BH, Do TM, Kang GO
Renewable Energy, 150, 116, 2020 |
| 3 |
Optimal scheduling of a by-product gas supply system in the iron- and steel-making process under uncertainties
Pena JGC, de Oliveira VB, Salles JLF
Computers & Chemical Engineering, 125, 351, 2019 |
| 4 |
Wall stresses in dual bottom purged steel making ladles
Mantripragada VT, Sarkar S
Chemical Engineering Research & Design, 139, 335, 2018 |
| 5 |
Dimensions and Analysis of Uncertainty in Industrial Modeling Process
Ahmad I, Kano M, Hasebe S
Journal of Chemical Engineering of Japan, 51(7), 533, 2018 |
| 6 |
An improved plant-wide multiperiod optimization model of a byproduct gas supply system in the iron and steel-making process
de Oliveira VB, Pena JGC, Salles JLF
Applied Energy, 164, 462, 2016 |
| 7 |
Economic assessment of options for biomass pretreatment and use in the blast furnace
Wiklund CM, Helle M, Saxen H
Biomass & Bioenergy, 91, 259, 2016 |
| 8 |
MILP-based optimization of oxygen distribution system in integrated steel mills
Zhang PK, Wang L, Tong LG
Computers & Chemical Engineering, 93, 175, 2016 |
| 9 |
A MILP model concerning the optimisation of penalty factors for the short-term distribution of byproduct gases produced in the iron and steel making process
Zhao XC, Bai H, Lu X, Shi Q, Han JH
Applied Energy, 148, 142, 2015 |
| 10 |
Economic process design for separation of CO2 from the off-gas in ironmaking and steelmaking plants
Kim H, Lee J, Lee S, Lee IB, Park JH, Han J
Energy, 88, 756, 2015 |
