검색결과 : 38건
| No. | Article |
|---|---|
| 1 |
Slurry bubble column measurements using advanced electrical capacitance volume tomography sensors Sines JN, Hwang SW, Marashdeh QM, Tong A, Wang DW, He PF, Straiton BJ, Zuccarelli CE, Fan LS Powder Technology, 355, 474, 2019 |
| 2 |
Hydrodynamic characteristics at the layer inversion point in three-phase fluidized beds with binary solids Kim JY, Bae JW, Grace JR, Epstein N, Lee DH Chemical Engineering Science, 157, 99, 2017 |
| 3 |
Horizontal immersed heater-to-bed heat transfer with layer inversion in gas-liquid-solid fluidized beds of binary solids Kim JY, Bae JW, Grace JR, Epstein N, Lee DH Chemical Engineering Science, 170, 501, 2017 |
| 4 |
Prediction of regime transition in three-phase sparged reactors using linear stability analysis Ghatage SV, Bhole MR, Padhiyar N, Joshi JB, Evans GM Chemical Engineering Journal, 235, 307, 2014 |
| 5 |
Data and models for liquid velocity and liquid holdup at layer inversion point in a three-phase fluidized bed of binary solids Rim GH, Kim JY, Lee DH, Grace JR, Epstein N Chemical Engineering Science, 109, 82, 2014 |
| 6 |
Prediction of layer inversion velocity in three-phase fluidized beds Rim G, Jeong C, Bae J, Lee Y, Lee DH, Epstein N, Grace JR, Kim SD Chemical Engineering Science, 100, 91, 2013 |
| 7 |
Layer inversion and mixing of binary solids in two- and three-phase fluidized beds Chun BS, Lee DH, Epstein N, Grace JR, Park AHA, Kim SD, Lee JK Chemical Engineering Science, 66(14), 3180, 2011 |
| 8 |
Liquid Holdup in a Pilot Scale Turbulent Contact Absorber - An Experimental and Comparative Study Haq A, Inayat MH, Zaman M, Chughtai IR Chemical Engineering & Technology, 33(12), 2059, 2010 |
| 9 |
Wall-to-bed mass transfer in three-phase fluidized beds in the absence and presence of a composite promoter Ramesh KV, Raju GMJ, Murty MSN, Sarma CB Chemical Engineering Journal, 152(1), 207, 2009 |
| 10 |
Hydrodynamic studies on three-phase fluidized bed using CFD analysis Sivaguru K, Begum KMMS, Anantharaman N Chemical Engineering Journal, 155(1-2), 207, 2009 |