| 1 |
Fuel adhesion characteristics under non-evaporation and evaporation conditions: Part 1-effect of injection pressure
Luo HL, Nishida K, Ogata Y, Zhang W, Fujikawa T
Fuel, 240, 317, 2019 |
| 2 |
Spray and flame characteristics of wall-impinging diesel fuel spray at different wall temperatures and ambient pressures in a constant volume combustion vessel
Chen BL, Feng L, Wang Y, Ma TY, Liu HF, Geng C, Yao MF
Fuel, 235, 416, 2019 |
| 3 |
Fuel adhesion characteristics under non-evaporation and evaporation conditions: Part 2-Effect of ambient pressure
Luo HL, Nishida K, Ogata Y
Fuel, 251, 98, 2019 |
| 4 |
Microscopic behavior of spray droplets under flat-wall impinging condition
Luo HL, Nishida K, Uchitomi S, Ogata Y, Zhang W, Fujikawa T
Fuel, 219, 467, 2018 |
| 5 |
Experimental study on impingement spray and near-field spray characteristics under high-pressure cross-flow conditions
Si ZB, Shimasaki N, Nishida K, Ogata Y, Guo M, Tang CL, Huang ZH
Fuel, 218, 12, 2018 |
| 6 |
Effect of temperature on fuel adhesion under spray-wall impingement condition
Luo HL, Nishida K, Uchitomi S, Ogata Y, Zhang W, Fujikawa T
Fuel, 234, 56, 2018 |
| 7 |
Effect of cross-flow on spray structure, droplet diameter and velocity of impinging spray
Si ZB, Ashida Y, Shimasaki N, Nishida K, Ogata Y
Fuel, 234, 592, 2018 |
| 8 |
Prediction of wall impingement in a direct injection spark ignition engine by analyzing spray images for high-pressure injection up to 50 MPa
Park J, Kim T, Kim D, Park S
Fuel Processing Technology, 179, 238, 2018 |
| 9 |
Optical study of spray-wall impingement impact on early-injection gasoline partially premixed combustion at low engine load
Tang QL, Liu HF, Li MK, Yao MF
Applied Energy, 185, 708, 2017 |
| 10 |
EXPERIMENTAL INVESTIGATION ON FUEL FILM FORMATION BY SPRAY IMPINGEMENT ON FLAT WALLS WITH DIFFERENT SURFACE ROUGHNESS
Luo HL, Uchitomi S, Nishida K, Ogata Y, Zhang W, Fujikawa T
Atomization and Sprays, 27(7), 611, 2017 |
