| 485 - 499 |
CO2 chemical conversion to useful products: An engineering insight to the latest advances toward sustainability
Najafabadi AT |
| 500 - 509 |
Physicochemical properties of lithium iron phosphate-carbon as lithium polymer battery cathodes
Jin B, Sun GP, Liang JC, Gu HB |
| 510 - 521 |
Numerical study of serpentine flow-field cooling plates on PEM fuel cells performance
Jeon DH |
| 522 - 534 |
Thermodynamic analysis of high-ash coal-fired power plant with carbon dioxide capture
Karmakar S, Kolar AK |
| 535 - 546 |
Transient response of a polymer electrolyte membrane fuel cell subjected to modulating cell voltage
Noorani S, Shamim T |
| 547 - 557 |
A cryogen-based peak-shaving technology: systematic approach and techno-economic analysis
Li YL, Wang X, Ding YL |
| 558 - 569 |
Dynamic simulation of air storagebased gas turbine plants
Khaitan SK, Raju M |
| 570 - 581 |
Experimental performance analysis and optimisation of medium temperature solar thermal collectors with silicon oil as a heat transfer fluid
Nkwetta DN, Smyth M, Zacharopoulos A, Hyde T |
| 582 - 597 |
Comparative evaluations of injection and spray characteristics of a diesel engine using karanja biodieseldiesel blends
Subramanian KA, Lahane S |
| 598 - 608 |
CO2 valorisation based on Fe3O4/FeO thermochemical redox reactions using concentrated solar energy
Abanades S, Villafan-Vidales I |
| 609 - 616 |
Feasibility of palm-biodiesel fuel for a direct internal reforming solid oxide fuel cell
Tran QT, Shiratori Y, Sasaki K |
| 617 - 630 |
Thermal analysis of a Li-ion battery module under realistic EV operating conditions
Awarke A, Jaeger M, Oezdemir O, Pischinger S |
| 631 - 637 |
Design and fabrication of stair-step-type electrolyte structure for solid oxide fuel cells
Palaci Y, Timurkutluk B |
| 638 - 644 |
Experimental study of hydrous ethanol gasoline blend (E10) in a four stroke port fuel-injected spark ignition engine
Venugopal T, Sharma A, Satapathy S, Ramesh A, Babu MKG |
| 645 - 656 |
Chemical looping reforming of ethanol for syngas generation: A theoretical investigation
Kale GR, Kulkarni BD, Bharadwaj KV |
| 657 - 664 |
Electrospun ultrafine composite fibers of binary fatty acid eutectics and polyethylene terephthalate as innovative form-stable phase change materials for storage and retrieval of thermal energy
Ke HZ, Cai YB, Wei QF, Xiao Y, Dong J, Hu Y, Song L, He GF, Zhao Y, Fong H |
| 665 - 672 |
Experimental study of a bellows-type reciprocating-mechanism driven heat loop
Cao YD, Xu DH, Gao MC |
| 673 - 682 |
Experimental study with operational solar-sorption cooling
Lu ZS, Xia ZZ, La D |
