| 5857 - 5864 |
Hydrocarbons conversion to syngas in inert porous media combustion
Toledo M, Gracia F, Caro S, Gomez J, Jovicic V |
| 5865 - 5877 |
Nitrogen doped anatase-rutile heterostructured nanotubes for enhanced photocatalytic hydrogen production: Promising structure for sustainable fuel production
Preethi LK, Antony RP, Mathews T, Loo SCJ, Wong LH, Dash S, Tyagi AK |
| 5878 - 5886 |
Construction of novel Bi2S3 nanobelt @ WO3 nanoplate arrays on FTO glass with high photoelectrochemical activity
Liu CJ, Yang YH, Li WZ, Li J, Li YM, Chen QY |
| 5887 - 5901 |
High performance NiS-nanoparticles sensitized TiO2 nanotube arrays for water reduction
Mollavali M, Falamaki C, Rohani S |
| 5902 - 5907 |
Mesoporous WO3 photoanodes for hydrogen production by water splitting and PhotoFuelCell operation
Sfaelou S, Pop LC, Monfort O, Dracopoulos V, Lianos P |
| 5908 - 5915 |
Facile fabrication of novel red phosphorus-CdS composite photocatalysts for H-2 evolution under visible light irradiation
Shi ZS, Dong XF, Dang HF |
| 5916 - 5926 |
Integration of biomass/steam gasification with heat recovery from hot slags: Thermodynamic characteristics
Sun YQ, Zhang ZT, Liu LL, Wang XD |
| 5927 - 5933 |
Development of pulsed deposited manganese and molybdenum oxide surfaces decorated with platinum nanoparticles and their catalytic application for formaldehyde oxidation
Ozdokur KV, Tatli AY, Yilmaz B, Kocak S, Ertas FN |
| 5934 - 5947 |
Photocatalytic formation of H-2 and value-added chemicals in aqueous glucose (Pt)-TiO2 suspension
Bellardita M, Garcia-Lopez EI, Marci G, Palmisano L |
| 5948 - 5954 |
Metal-modified niobium carbides as low-cost and impurity-resistant electrocatalysts for hydrogen evolution in acidic and alkaline electrolytes
Tackett BM, Kimmel YC, Chen JGG |
| 5955 - 5968 |
Hydrogen from ammonia over cobalt incorporated silicate structured catalysts prepared using different cobalt salts
Varisli D, Kaykac NG |
| 5969 - 5978 |
Destabilization of lithium hydride by the substitution of group 14 elements: A review
Jain A, Miyaoka H, Ichikawa T |
| 5979 - 5985 |
"Capping" out oxygen interference: An approach to achieve efficient hydrogen storage via Kubas binding
Ahmad R, Bora PL, Singh AK |
| 5986 - 5993 |
Determination of the molecular structure of amorphous Mg(B3H8)(2)(THF)(2) through infrared spectroscopic and computational studies
Palumbo O, Nguyen P, Jensen CM, Paolone A |
| 5994 - 6003 |
Structure, hydrogen storage kinetics and thermodynamics of Mg-base Sm5Mg41 alloy
Yuan ZM, Yang T, Bu WG, Shang HW, Qi Y, Zhang YH |
| 6004 - 6012 |
CFD modeling of a diesel evaporator used in fuel cell systems
Atmaca M, Girgin I, Ezgi C |
| 6013 - 6019 |
Flexible fuel cell using stiffness-controlled endplate
Chang I, Park T, Lee J, Lee HB, Ko SH, Cha SW |
| 6020 - 6028 |
Investigation of multi-coating process treated magnesium alloy as bipolar plate in polymer electrolyte membrane fuel cell
Feng K, Guo XW, Li ZG, Yao CW, Wu YX |
| 6029 - 6035 |
Anisotropic electrical resistance of proton exchange membrane fuel cell transport layers as a function of cyclic strain
Todd D, Bennett S, Merida W |
| 6036 - 6044 |
Development of flexible ceramic-glass seals for intermediate temperature planar solid oxide fuel cell
Zhang W, Wang XP, Dong Y, Yang JJ, Pu J, Chi B, Jian L |
| 6045 - 6052 |
High temperature cyclic oxidation behavior of ferritic stainless steel with addition of alloying elements Nb and Ti for use in SOFCs interconnect
Safikhani A, Esmailian M, Tinatiseresht T, Darband GB |
| 6053 - 6063 |
FE analysis of hydrogen diffusion around a crack tip in an austenitic stainless steel
Wang YF, Li XF, Dou DY, Shen LM, Gong JM |
| 6064 - 6075 |
Life cycle assessment of hydrogen production from biogas reforming
Hajjaji N, Martinez S, Trably E, Steyer JP, Helias A |
| 6076 - 6083 |
An experimental investigation of detonation limits in hydrogen-oxygen-argon mixtures
Gao Y, Zhang B, Ng HD, Lee JHS |
| 6084 - 6084 |
Preface to the special issue section on "Moving towards hydrogen economy in India: Challenges and opportunities in production, storage and usage of hydrogen energy"
Malhotra RK, Das LM, Sharma A, Tuli DK, Sachdeva S |
| 6085 - 6093 |
Toward hydrogen production from aqueous phase reforming of polyols on Pt/Al2O3 catalyst
Bindwal AB, Vaidya PD |
| 6094 - 6106 |
Tailored hydrotalcite-based hybrid materials for hydrogen production via sorption-enhanced steam reforming of ethanol
Dewoolkar KD, Vaidya PD |
| 6107 - 6114 |
Hydrogen and methane production from cassava wastewater using two-stage upflow anaerobic sludge blanket reactors (UASB) with an emphasis on maximum hydrogen production
Intanoo P, Chaimongkol P, Chavadej S |
| 6115 - 6122 |
PdO/LaCoO3 heterojunction photocatalysts for highly hydrogen production from formaldehyde aqueous solution under visible light
Ling F, Anthony OC, Xiong Q, Luo MP, Pan XW, Jia LS, Huang JL, Sun DH, Li QB |
| 6123 - 6133 |
Hydrogen generation by ethanol steam reforming over Rh/Al2O3 and Rh/CeZrO2 catalysts: A comparative study
Sharma PK, Saxena N, Roy PK, Bhatt A |
| 6134 - 6138 |
Preparation and hydrogen storage properties of Mg-Al-Li solid solution
Lan ZQ, Peng WQ, Wei WL, Xu LQ, Guo J |
| 6139 - 6147 |
Adsorption-desorption cycle thermodynamics for adsorptive hydrogen storage system
Xiao JS, Benard P, Chahine R |
| 6148 - 6154 |
Development of chemical kinetics based hydrogen HCCI combustion model for parametric investigation
Sharma P, Dhar A |
| 6155 - 6161 |
Modeling & simulation study to assess the effect of CO2 on performance and emissions characteristics of 18% HCNG blend on a light duty SI engine
Chugh S, Posina VA, Sonkar K, Srivatsava U, Sharma A, Acharya GK |
| 6162 - 6169 |
The effects of hydrogen addition on soot particle size distribution functions in laminar premixed flame
Wei MR, Liu JP, Guo GL, Li S |
