| 14295 - 14308 |
Operation planning of an independent microgrid for cold regions by the distribution of fuel cells and water electrolyzers using a genetic algorithm
Obara S, Watanabe S, Rengarajan B |
| 14309 - 14323 |
Projecting full build-out environmental impacts and roll-out strategies associated with viable hydrogen fueling infrastructure strategies
Stephens-Romero SD, Brown TM, Carreras-Sospedra M, Kang JE, Brouwer J, Dabdub D, Recker WW, Samuelsen GS |
| 14324 - 14334 |
A regional decision support system for onsite renewable hydrogen production from solar and wind energy sources
Dagdougui H, Ouammi A, Sacile R |
| 14335 - 14341 |
A concise model for evaluating water electrolysis
Shen MZ, Bennett N, Ding YL, Scott K |
| 14342 - 14348 |
H-2 production by gamma and He ions water radiolysis, effect of presence TiO2 nanoparticles
Essehli R, Crumiere F, Blain G, Vandenborre J, Pottier F, Grambow B, Fattahi M, Mostafavi M |
| 14349 - 14359 |
Technical and economic evaluation of solar hydrogen production by supercritical water gasification of biomass in China
Lu YJ, Zhao L, Guo LJ |
| 14360 - 14373 |
Impact of three different TiO2 morphologies on hydrogen evolution by methanol assisted water splitting: Nanoparticles, nanotubes and aerogels
D'Elia D, Beauger C, Hochepied JF, Rigacci A, Berger MH, Keller N, Keller-Spitzer V, Suzuki Y, Valmalette JC, Benabdesselam M, Achard P |
| 14374 - 14380 |
A novel photoelectrochemical cell with self-organized TiO2 nanotubes as photoanodes for hydrogen generation
Li YK, Yu HM, Song W, Li GF, Yi BL, Shao ZG |
| 14381 - 14390 |
Hydrogen production from acid hydrolyzed molasses by the hydrogen overproducing Escherichia coli strain HD701 and subsequent use of the waste bacterial biomass for biosorption of Cd(II) and Zn(II)
Morsy FM |
| 14391 - 14400 |
Hydrogen production by biomass gasification in supercritical water with bimetallic Ni-M/gamma Al2O3 catalysts (M = Cu, Co and Sn)
Li S, Lu YJ, Guo LJ, Zhang XM |
| 14401 - 14407 |
Hydrogen and methane yields of untreated, water-extracted and acid (HCl) treated maize in one- and two-stage batch assays
Pakarinen OM, Kaparaju PLN, Rintala JA |
| 14408 - 14415 |
Supercritical water gasification of real biomass feedstocks in continuous flow system
Madenoglu TG, Boukis N, Saglam M, Yuksel M |
| 14416 - 14427 |
Mathematical simulation and optimization of methanol dehydration and cyclohexane dehydrogenation in a thermally coupled dual-membrane reactor
Farsi M, Jahanmiri A |
| 14428 - 14434 |
Adsorption-membrane hybrid system for ethanol steam reforming: Thermodynamic analysis
Saebea D, Arpornwichanop A, Patcharavorachot Y, Assabumrungrat S |
| 14435 - 14446 |
Promotional effect of alkaline earth over Ni-La2O3 catalyst for CO2 reforming of CH4: Role of surface oxygen species on H-2 production and carbon suppression
Sutthiumporn K, Kawi S |
| 14447 - 14454 |
Properties of Ni/Y2O3 and its catalytic performance in methane conversion to syngas
Liu HM, He DH |
| 14455 - 14463 |
Steam co-gasification of coal and biomass derived chars with synergy effect as an innovative way of hydrogen-rich gas production
Howaniec N, Smolinski A, Stanczyk K, Pichlak M |
| 14464 - 14476 |
On the application of standard isotherms to hydrogen adsorption in microporous materials
Al-Hajjaj A, Zamora B, Shah AA, Reguera E, Bavykin DV, Walsh FC |
| 14477 - 14483 |
Ab initio calculations on energetics and electronic structures of cubic Mg3MNi2 (M = Al, Ti, Mn) hydrogen storage alloys
Zhang J, Huang YN, Mao C, Peng P, Shao YM, Zhou DW |
| 14484 - 14487 |
Microstructure and hydrogen storage properties of porous Ni@Mg
Choi YJ, Liu ZY, Gao HN, Zhao ZY, Wang N, Hou DL |
| 14488 - 14495 |
Hydrogen absorption kinetics of magnesium fiber prepared by vapor deposition
Matsumoto I, Asano K, Sakaki K, Nakamura Y |
| 14496 - 14502 |
Reversible hydrogen-storage at reduced temperatures in the intermetallic compound Mg-6(Ni,Pd)
Lass EA |
| 14503 - 14511 |
Improved hydrogen sorption performance of NbF5-catalysed NaAlH4
Mao JF, Guo ZP, Liu HK |
| 14512 - 14526 |
Research progress in LiBH4 for hydrogen storage: A review
Li C, Peng P, Zhou DW, Wan L |
| 14527 - 14533 |
Anchored cobalt film as stable supported catalyst for hydrolysis of sodium borohydride for chemical hydrogen storage
Akdim O, Chamoun R, Demirci UB, Zaatar Y, Khoury A, Miele P |
| 14534 - 14551 |
Hydrogen storage technology options for fuel cell vehicles: Well-to-wheel costs, energy efficiencies, and greenhouse gas emissions
Paster MD, Ahluwalia RK, Berry G, Elgowainy A, Lasher S, McKenney K, Gardiner M |
| 14552 - 14561 |
An improved tank in series model for PEMFC
Bozbiyik B, Danilov VA, Denayer J |
| 14562 - 14572 |
Micro PEM fuel cell current collector design and optimization with CFD 3D modeling
Zahi I, Rossi C, Faucheux V |
| 14573 - 14589 |
Computationally efficient multi-phase models for a proton exchange membrane fuel cell: Asymptotic reduction and thermal decoupling
Ly H, Birgersson E, Vynnycky M |
| 14590 - 14598 |
Electrooxidation of H-2/CO on carbon-supported PtRu-MoOx nanoparticles for polymer electrolyte fuel cells
Alcaide F, Alvarez G, Tsiouvaras N, Pena MA, Fierro JLG, Martinez-Huerta M |
| 14599 - 14607 |
Microwave assisted synthesis of high performance Ru85Se15/MWCNTs cathode catalysts for PEM fuel cell applications
Zheng QM, Cheng X, Jao TC, Weng FB, Su A, Chiang YC |
| 14608 - 14621 |
Output-feedback voltage tracking control for input-constrained PEM fuel cell systems
Chen PC |
| 14622 - 14631 |
Composite membranes based on sulfonated poly(aryl ether ketone)s containing the hexafluoroisopropylidene diphenyl moiety and poly(amic acid) for proton exchange membrane fuel cell application
Li Y, Li ZL, Lu XF, Zhang CC, Wang ZJ, Kong LR, Wang C, Liu XC |
| 14632 - 14642 |
Improved power generation performance of solid oxide fuel cells using doped LaGaO3 electrolyte films prepared by screen printing method II. Optimization of Ni-Ce0.8Sm0.2O1.9 cermet anode support
Hong JE, Inagaki T, Ida S, Ishihara T |
| 14643 - 14647 |
An intermediate temperature solid oxide fuel cell fabricated by one step co-press-sintering
Zhang L, Tao SW |
| 14648 - 14658 |
Cross-over and performance modeling of liquid-feed Polymer Electrolyte Membrane Direct Ethanol Fuel Cells
Suresh NS, Jayanti S |
| 14659 - 14667 |
Enhanced activity observed for sulfuric acid and chlorosulfuric acid functionalized carbon black as PtRu and PtSn electrocatalyst support for DMFC and DEFC applications
Carmo M, Brandalise M, Neto AO, Spinace EV, Taylor AD, Linardi M, Poco JGR |
| 14668 - 14677 |
A novel hybrid Nafion-PBI-ZP membrane for direct methanol fuel cells
Ahmad H, Kamarudin SK, Hasran UA, Daud WRW |
| 14678 - 14703 |
Fuel cell systems optimisation - Methods and strategies
Ang SMC, Fraga ES, Brandon NP, Samsatli NJ, Brett DJL |
| 14704 - 14718 |
Modeling of an air cathode for microfluidic fuel cells: Transport and polarization behaviors
Wang HZ, Leung DYC, Xuan J |
| 14719 - 14724 |
Effect of deactivation and reactivation of palladium anode catalyst on performance of direct formic acid fuel cell (DFAFC)
Baik SM, Han J, Kim J, Kwon Y |
| 14725 - 14733 |
Influence of silica morphology in composite Nafion membranes properties
Alvarez A, Guzman C, Carbone A, Sacca A, Gatto I, Passalacqua E, Nava R, Ornelas R, Ledesma-Garcia J, Arriaga LG |
| 14734 - 14744 |
Numerical characterization on concentration polarization of hydrogen permeation in a Pd-based membrane tube
Chen WH, Syu WZ, Hung CI |
| 14745 - 14758 |
Sensitivity analysis of temperature uncertainty in an aircraft PEM fuel cell
Correa G, Borello F, Santarelli M |
| 14759 - 14767 |
Advancing lean combustion of hydrogen-air mixtures by laser-induced spark ignition
Boker D, Bruggemann D |
| 14768 - 14769 |
Forward
Chongdar TK |
| 14770 - 14770 |
Untitled
Basu S, Rengaswamy R |
| 14771 - 14778 |
Methanol reformer integrated phosphoric acid fuel cell (PAFC) based compact plant for field deployment
Pareta M, Choudhury SR, Somaiah B, Rangarajan J, Matre N, Palande J |
| 14779 - 14786 |
Dynamic modeling and simulation of a proton exchange membrane electrolyzer for hydrogen production
Awasthi A, Scott K, Basu S |
| 14787 - 14795 |
Estimating hydrogen production potential in biorefineries using microbial electrolysis cell technology
Borole AP, Mielenz JR |
| 14796 - 14804 |
Nano-crystalline RuxSn1-xO2 powder catalysts for oxygen evolution reaction in proton exchange membrane water electrolysers
Wu X, Tayal J, Basu S, Scott K |
| 14805 - 14814 |
Pt-Co electrocatalyst with varying atomic percentage of transition metal
Rao CS, Singh DM, Sekhar R, Rangarajan J |
| 14815 - 14822 |
Effect of SiO2 additives on the PEM fuel cell electrode performance
Velan VS, Velayutham G, Hebalkar N, Dhathathreyan KS |
| 14823 - 14828 |
Effect of GDL compression on pressure drop and pressure distribution in PEMFC flow field
Radhakrishnan V, Haridoss P |
| 14829 - 14837 |
Novel anodes for fuel cell using nanostructured tungsten and titanium based electrocatalysts
Nagarajan M, Kalaignan GP, Pathanjali GA |
| 14838 - 14844 |
Parametric sensitivity analysis of PEM fuel cell electrochemical Model
Srinivasulu GN, Subrahmanyam T, Rao VD |
| 14845 - 14850 |
Effect of micro-layer PTFE on the performance of PEM fuel cell electrodes
Velayutham G |
| 14851 - 14857 |
Semi-empirical modeling of electrical conductivity for composite bipolar plate with multiple reinforcements
Kakati BK, Sathiyamoorthy D, Verma A |
| 14858 - 14865 |
Proton conducting composite membranes for fuel cell application
Bhavani P, Sangeetha D |
| 14866 - 14872 |
Study of a porous membrane humidification method in polymer electrolyte fuel cells
Ramya K, Sreenivas J, Dhathathreyan KS |
| 14873 - 14883 |
Temperature dependence on methanol oxidation and product formation on Pt and Pd modified Pt electrodes in alkaline medium
Mahapatra SS, Dutta A, Datta J |
| 14884 - 14897 |
Bi-metallic and tri-metallic Pt-Sn/C, Pt-Ir/C, Pt-Ir-Sn/C catalysts for electro-oxidation of ethanol in direct ethanol fuel cell
Tayal J, Rawat B, Basu S |
| 14898 - 14906 |
High performance PtPdAu nano-catalyst for ethanol oxidation in alkaline media for fuel cell applications
Dutta A, Mahapatra SS, Datta J |
| 14907 - 14913 |
Neodymium triflate modified nafion composite membrane for reduced alcohol permeability in direct alcohol fuel cell
Shroti N, Barbora L, Verma A |
| 14914 - 14922 |
Microbial fuel cell constructed with micro-organisms isolated from industry effluent
Gunasekaran G, Chongdar S, Naragoni S, Rodrigues PV, Bobba R |
| 14923 - 14929 |
Synthesis and characterization of Pt-Au/C catalyst for glucose electro-oxidation for the application in direct glucose fuel cell
Basu D, Basu S |
| 14930 - 14935 |
Anode supported solid oxide fuel cells (SOFC) by electrophoretic deposition
Majhi SM, Behura SK, Bhattacharjee S, Singh BP, Chongdar TK, Gokhale NM, Besra L |
| 14936 - 14942 |
Synthesis and characterization of nanocrystalline ScSZ electrolyte for SOFCs
Lakshmi VV, Bauri R, Gandhi AS, Paul S |
| 14943 - 14947 |
Role of sintering temperature on thermal, electrical and structural properties of Y2Ti2O7 pyrochlores
Gill JK, Pandey OP, Singh K |
| 14948 - 14955 |
Thermal, structural and crystallization kinetics of SiO2-BaO-ZnO-B2O3-Al2O3 glass samples as a sealant for SOFC
Arora A, Singh K, Pandey OP |
| 14956 - 14962 |
Aqueous slurry processing of monolithic films for SOFC - YSZ, LSM and YSZ-NiO systems
Ramanathan S, Kakade MB |
| 14963 - 14970 |
Low temperature assisted chemical coprecipitation synthesis of 8YSZ plasma sprayable powder for solid oxide fuel cells
Aruna ST, Balaji N, Prakash BS |
| 14971 - 14976 |
Thermal and crystallization kinetics of yttrium and lanthanum calcium silicate glass sealants for solid oxide fuel cells
Kumar V, Rupali, Pandey OP, Singh K |
| 14977 - 14983 |
Impedance spectroscopy studies of Gd-CeO2-(LiNa)CO3 nano composite electrolytes for low temperature SOFC applications
Chockalingam R, Basu S |
| 14984 - 14995 |
Synthesis and characterization of 10%Gd doped ceria (GDC) deposited on NiO-GDC anode-grade-ceramic substrate as half cell for IT-SOFC
Chourashiya MG, Jadhav LD |
| 14996 - 15001 |
Investigation of crystallization kinetic of SrO-La2O3-Al2O3-B2O3-SiO2 glass and its suitability for SOFC sealant
Ojha PK, Chongdar TK, Gokhale NM, Kulkarni AR |
| 15002 - 15008 |
Study of glasses/glass-ceramics in the SrO-ZnO-SiO2 system as high temperature sealant for SOFC applications
Tiwari B, Dixit A, Kothiyal GP |
| 15009 - 15017 |
Design and implementation of an energy efficient power conditioner for fuel cell generation system
Chandrasekar V, Chacko RV, Lakaparampil ZV |
| 15018 - 15028 |
Analysis and comparative study of pulsating current of fuel cells by inverter load with different power converter topologies
Somaiah B, Agarwal V, Choudhury SR, Duttagupta SP, Govindan K |
| 15029 - 15043 |
Modeling and control of a PEM fuel cell based hybrid multilevel inverter
Seyezhai R, Mathur BL |
