| 3273 - 3282 |
Exergy analysis of a hybrid solar hydrogen system with activated carbon storage
Hacatoglu K, Dincer I, Rosen MA |
| 3283 - 3289 |
Energy availability problems with rapid deployment of wind-hydrogen systems
Honnery D, Moriarty P |
| 3290 - 3301 |
Fuel cycle CO2-e targets of renewable hydrogen as a realistic transportation fuel in Australia
Boretti A |
| 3302 - 3304 |
Refinement of motivity factor in comparison of transportation fuels
Utgikar VP, Vijaykumar J, Thyagarajan K |
| 3305 - 3312 |
The enhanced electrocatalytic activity and stability of NiW films electrodeposited under super gravity field for hydrogen evolution reaction
Wang MY, Wang Z, Guo ZC, Li ZJ |
| 3313 - 3321 |
Nanostructured Pt and Pt-Sn catalysts supported on oxidized carbon nanotubes for ethanol and ethylene glycol electro-oxidation
Sieben JM, Duarte MME |
| 3322 - 3332 |
Investigation of grain boundary formation in PtRu/C catalyst obtained in a polyol process with post-treatment
Wang GX, Takeguchi T, Muhamad EN, Yamanaka T, Ueda W |
| 3333 - 3339 |
Optimization of components and assembling in a PEM electrolyzer stack
Siracusano S, Di Blasi A, Baglio V, Brunaccini G, Briguglio N, Stassi A, Ornelas R, Trifoni E, Antonucci V, Arico AS |
| 3340 - 3346 |
La0.75Sr0.25Cr0.5Mn0.5O3 as hydrogen electrode for solid oxide electrolysis cells
Jin C, Yang CH, Zhao F, Cui D, Chen FL |
| 3347 - 3353 |
Durability study of electrospray deposited Pt film electrode for hydrogen production in PV assisted water electrolysis system
Chae SY, Yadav JB, Kim KJ, Joo OS |
| 3354 - 3363 |
Numerical simulation of a tubular solar reactor for methane cracking
Valdes-Parada FJ, Romero-Paredes H, Espinosa-Paredes G |
| 3364 - 3370 |
Modeling and analysis of miniaturized methanol reformer for fuel cell powered mobile applications
Vadlamudi VK, Palanki S |
| 3371 - 3383 |
Enhancement of hydrogen production via coupling of MCH dehydrogenation reaction and methanol synthesis process by using thermally coupled heat exchanger reactor
Rahimpour MR, Vakili R, Pourazadi E, Bahmanpour AM, Iranshahi D |
| 3384 - 3396 |
Oxidative steam reforming of ethanol over Rh based catalysts in a micro-channel reactor
Peela NR, Kunzru D |
| 3397 - 3408 |
Thermal behavior and hydrogen production of methanol steam reforming and autothermal reforming with spiral preheating
Chen WH, Syu YJ |
| 3409 - 3416 |
Biohydrogen production from cassava starch processing wastewater by thermophilic mixed cultures
O-Thong S, Hniman A, Prasertsan P, Imai T |
| 3417 - 3425 |
Production of hydrogen through the coupling of dehydrogenation and hydrogenation for the synthesis of cyclohexanone and furfuryl alcohol over different promoters supported on Cu-MgO catalysts
Nagaraja BM, Padmasri AH, Raju BD, Rao KSR |
| 3426 - 3433 |
Hydrogen production from catalytic gasification of switchgrass biocrude in supercritical water
Byrd AJ, Kumar S, Kong LZ, Ramsurn H, Gupta RB |
| 3434 - 3441 |
Hydrogen production using Rhodobacter sphaeroides (OU 001) in a flat panel rocking photobioreactor
Gilbert JJ, Ray S, Das D |
| 3442 - 3449 |
Continuous production of hydrogen from oat straw hydrolysate in a biotrickling filter
Arriaga S, Rosas I, Alatriste-Mondragon F, Razo-Flores E |
| 3450 - 3456 |
Comparison of different electrodes in hydrogen gas production from electrohydrolysis of wastewater organics using photovoltaic cells (PVC)
Kargi F |
| 3457 - 3464 |
Hydrogen gas production from olive mill wastewater by electrohydrolysis with simultaneous COD removal
Kargi F, Catalkaya EC |
| 3465 - 3470 |
Hydrogen and methane production from lipid-extracted microalgal biomass residues
Yang ZM, Guo RB, Xu XH, Fan XL, Luo SJ |
| 3471 - 3482 |
Transformation of methane into synthesis gas using the redox property of Ce-Fe mixed oxides: Effect of calcination temperature
Li KZ, Wang H, Wei YG, Yan DX |
| 3483 - 3495 |
A comparison of two different flow types on performance of a thermally coupled recuperative reactor containing naphtha reforming process and hydrogenation of nitrobenzene
Iranshahi D, Pourazadi E, Bahmanpour AM, Rahimpour MR |
| 3496 - 3504 |
Self-sustained operation and durability testing of a 300 W-class micro-structured LPG fuel processor
Wichert M, Men Y, O'Connell M, Tiemann D, Zapf R, Kolb G, Butschek S, Frank R, Schiegl A |
| 3505 - 3514 |
Hydrogen production by steam reforming of simulated liquefied natural gas (LNG) over mesoporous nickel-M-alumina (M = Ni, Ce, La, Y, Cs, Fe, Co, and Mg) aerogel catalysts
Seo JG, Youn MH, Bang Y, Song IK |
| 3515 - 3520 |
Synthesis and hydrogen storage properties of ultrafine Mg-Zn particles
Liu T, Zhang TW, Zhang XZ, Li XG |
| 3521 - 3528 |
Improvement of hydrogen storage characteristics of Mg by planetary ball milling under H-2 with metallic element(s) and/or Fe2O3
Song MY, Kwon SN, Bobet JL, Park HR, Mumm DR |
| 3529 - 3536 |
Effect of pressure, composition and temperature characteristics on thermal response and overall reaction rates in a metal hydride tank
Wijayanta AT, Nakaso K, Aoki T, Kitazato Y, Fukai J |
| 3537 - 3546 |
Interferents for hydrogen storage on a graphene sheet decorated with nickel: A DFT study
Sigal A, Rojas MI, Leiva EPM |
| 3547 - 3555 |
Improvement in the electrochemical properties of gas atomized AB(2) metal hydride alloys by hydrogen annealing
Young K, Ouchi T, Banik A, Koch J, Fetcenko MA |
| 3556 - 3565 |
Experimental results of an air-cooled lab-scale H-2 storage tank based on sodium alanate
Utz I, Schmidt N, Worner A, Hu JJ, Zabara O, Fichtner M |
| 3566 - 3573 |
Co-electrospun Pd-coated porous carbon nanofibers for hydrogen storage applications
Kim H, Lee D, Moon J |
| 3574 - 3579 |
Experimental investigation of hydrogen storage in single walled carbon nanotubes functionalized with borane
Silambarasan D, Surya VJ, Vasu V, Iyakutti K |
| 3580 - 3585 |
Equilibrium pressure measurements in the Li-N-H system by static manometric method
Anand NS, Jat RA, Sawant SG, Parida SC, Chaudhary ZS, Venugopal V |
| 3586 - 3592 |
Synthesis and hydrogen adsorption properties of a new iron based porous metal-organic framework
Lupu D, Ardelean O, Blanita G, Borodi G, Lazar MD, Biris AR, Ioan C, Mihet M, Misan I, Popeneciu G |
| 3593 - 3599 |
Improved hydrogen desorption in lithium alanate by addition of SWCNT-metallic catalyst composite
Ismail M, Zhao Y, Yu XB, Ranjbar A, Dou SX |
| 3600 - 3605 |
In situ transmission electron microscopy observation of the decomposition of MgH2 nanofiber
Zhu C, Sakaguchi N, Hosokai S, Watanabe S, Akiyama T |
| 3606 - 3613 |
Investigation on sulfuric acid sulfonation of in-situ sol-gel derived Nafion/SiO2 composite membrane
Ke CC, Li XJ, Shen QA, Qu SG, Shao ZG, Yi BL |
| 3614 - 3622 |
Mid-baffle interdigitated flow fields for proton exchange membrane fuel cells
Thitakamol V, Therdthianwong A, Therdthianwong S |
| 3623 - 3634 |
Poroelastic PEM fuel cell catalyst layer and its implication in predicting the effect of mechanical load on flow and transport properties
Poornesh KK, Cho C |
| 3635 - 3648 |
Application of water barrier layers in a proton exchange membrane fuel cell for improved water management at low humidity conditions
Blanco M, Wilkinson DP, Wang HJ |
| 3649 - 3657 |
Electrical conduction behavior of proton conductor BaCe1-xSmxO3-delta in the intermediate temperature range
Zhang CJ, Zhao HL, Zhai SY |
| 3658 - 3665 |
Synthesis, characterization and evaluation of PrBaCo2-xFexO5+delta as cathodes for intermediate-temperature solid oxide fuel cells
Zhao L, Shen JC, He BB, Chen FL, Xia CR |
| 3666 - 3672 |
La2O3-Al2O3-B2O3-SiO2 glasses for solid oxide fuel cell applications
Wang SF, Lu CM, Wu YC, Yang YC, Chiu TW |
| 3673 - 3680 |
Nanostructured GDC-impregnated La0.7Ca0.3CrO3-delta symmetrical electrodes for solid oxide fuel cells operating on hydrogen and city gas
Zhang YC, Shen Y, Du XB, Li JX, Cao XJ, He TM |
| 3681 - 3687 |
Preparation and properties of sulfonated poly(phthalazinone ether sulfone ketone)/zirconium sulfophenylphosphate/PTFE composite membranes
Dong FL, Li ZF, Wang SW, Xu LJ, Yu XJ |
| 3688 - 3696 |
Direct methanol fuel cell performance of sulfonated poly (2,6-dimethyl-1,4-phenylene oxide)-polybenzimidazole blend proton exchange membranes
Haghighi AH, Hasani-Sadrabadi MM, Dashtimoghadam E, Bahlakeh G, Shakeri SE, Majedi FS, Emami SH, Moaddel H |
| 3697 - 3703 |
Premixed hydrogen-air combustion system for fuel cell systems
Voss S, Steinbruck R, Kautz M, Schiesswohl E, Arendt M, Felde JT, Volkert J, Trimis D |
| 3704 - 3711 |
Intrinsic and extrinsic compositional effects in ceria/carbonate composite electrolytes for fuel cells
Ferreira ASV, Soares CMC, Figueiredo FMHLR, Marques FMB |
| 3712 - 3725 |
International Summer Engineering Program on fuel cells for undergraduate engineering students
Baker DK, Agar E |
| 3726 - 3738 |
Evaluation of power generation schemes based on hydrogen-fuelled combined cycle with carbon capture and storage (CCS)
Cormos CC |
| 3739 - 3745 |
The influences of hydrogen on the performance and emission characteristics of a heavy duty natural gas engine
Park C, Kim C, Choi Y, Won S, Moriyoshi Y |
| 3746 - 3756 |
Analysis of ignition delay period of a dual fuel diesel engine with hydrogen and LPG as secondary fuels
Lata DB, Misra A |
| 3757 - 3768 |
Investigation of a novel bayonet tube high temperature heat exchanger with inner and outer fins
Ma T, Zeng M, Ji YP, Zhu HB, Wang QW |
| 3769 - 3777 |
Experimental and modeling study of laminar burning velocity of biomass derived gases/air mixtures
Yan B, Wu Y, Liu C, Yu JF, Li B, Li ZS, Chen G, Bai XS, Alden M, Konnov AA |
| 3778 - 3788 |
Pt-Co catalyst-coated channel plate reactor for preferential CO oxidation
Yu XH, Li HL, Tu ST, Yan JY, Wang ZD |
