| 6339 - 6348 |
Fuel cells for non-automotive uses: Status and prospects
Upreti G, Greene DL, Duleep KG, Sawhney R |
| 6349 - 6355 |
Bucky diamond produced by annealing nanodiamond as a support of Pt electrocatalyst for methanol electrooxidation
Zang JB, Wang YH, Bian LY, Zhang JH, Meng FW, Zhao YL, Qu XH, Ren SB |
| 6356 - 6362 |
Preparation of nickel catalysts supported on CaO center dot 2Al(2)O(3) for methane reforming with carbon dioxide
Ranjbar A, Rezaei M |
| 6363 - 6371 |
Ce-K-promoted Co-Mo/Al2O3 catalysts for the water gas shift reaction
Zhang YF, Zhang GJ, Zhao YQ, Li XL, Sun YL, Xu Y |
| 6372 - 6380 |
Formic acid dehydrogenation over PtRuBiOx/C catalyst for generation of CO-free hydrogen in a continuous-flow reactor
Hu CQ, Ting SW, Tsui J, Chan KY |
| 6381 - 6388 |
Effect of Cu loading on Cu/ZnO water-gas shift catalysts for shut-down/start-up operation
Liu XY, Guo PJ, Xie SH, Pei Y, Qiao MH, Fan KN |
| 6389 - 6399 |
2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis
Ni M |
| 6400 - 6406 |
Electrochemical study of La0.6Sr0.4Co0.8Fe0.2O3 during oxygen evolution reaction
Garcia EM, Taroco HA, Matencio T, Domingues RZ, dos Santos JAF |
| 6407 - 6414 |
Optimization of liquid-liquid phase separation characteristics in the Bunsen section of the sulfur-iodine hydrogen production process
Zhu QQ, Zhang YW, Zhou C, Wang ZH, Zhou JH, Cen KF |
| 6415 - 6421 |
The HI catalytic decomposition for the lab-scale H-2 producing apparatus of the iodine-sulfur thermochemical cycle
Wang LJ, Li DC, Zhang P, Chen SZ, Xu JM |
| 6422 - 6430 |
Linker-free quantum dot sensitized TiO2 photoelectrochemical cells
Zhu LY, An WJ, Springer JW, Modesto-Lopez LB, Gullapalli S, Holten D, Wong MS, Biswas P |
| 6431 - 6437 |
Cu2O/Cu/TiO2 nanotube Ohmic heterojunction arrays with enhanced photocatalytic hydrogen production activity
Li ZH, Liu JW, Wang DJ, Gao Y, Shen J |
| 6438 - 6446 |
Self-organized TiO2 nanotube arrays with uniform platinum nanoparticles for highly efficient water splitting
Lai YK, Gong JJ, Lin CJ |
| 6447 - 6472 |
Catalytic steam reforming of bio-oil
Trane R, Dahl S, Skjoth-Rasmussen MS, Jensen AD |
| 6473 - 6490 |
Microbial hydrogen production by bioconversion of crude glycerol: A review
Sarma SJ, Brar SK, Sydney EB, Le Bihan Y, Buelna G, Soccol CR |
| 6491 - 6502 |
Efficiency and efficacy of pre-treatment and bioreaction for bio-H-2 energy production from organic waste
Ruggeri B, Tommasi T |
| 6503 - 6510 |
Hydrogen-rich gas production by steam gasification of municipal solid waste (MSW) using NiO supported on modified dolomite
Wang JB, Cheng G, You YL, Xiao B, Liu SM, He PW, Guo DB, Guo XJ, Zhang GJ |
| 6511 - 6518 |
Hydrogen production by biomass gasification in a fluidized-bed reactor promoted by an Fe/CaO catalyst
Huang BS, Chen HY, Chuang KH, Yang RX, Wey MY |
| 6519 - 6526 |
Yeast extract as an effective nitrogen source stimulating cell growth and enhancing hydrogen photoproduction by Rhodobacter sphaeroides strains from mineral springs
Hakobyan L, Gabrielyan L, Trchounian A |
| 6527 - 6535 |
Influence of moisture content on the direct gasification of dewatered sludge via supercritical water
Xu ZR, Zhu W, Li M |
| 6536 - 6544 |
Comparison between heterofermentation and autofermentation in hydrogen production from Arthrospira (Spirulina) platensis wet biomass
Cheng J, Xia A, Song WL, Su HB, Thou JH, Cen KF |
| 6545 - 6553 |
Hydrothermal hydrolysis of starch with CO2 and detoxification of the hydrolysates with activated carbon for bio-hydrogen fermentation
Orozco RL, Redwood MD, Leeke GA, Bahari A, Santos RCD, Macaskie LE |
| 6554 - 6561 |
Effect of microwave irradiation pretreatment of cow dung compost on bio-hydrogen process from corn stalk by dark fermentation
Song ZX, Wang ZY, Wu LY, Fan YT, Hou HW |
| 6562 - 6571 |
Design and test of a miniature hydrogen production reactor integrated with heat supply, fuel vaporization, methanol-steam reforming and carbon monoxide removal unit
Chein RY, Chen YC, Chen JY, Chung JN |
| 6572 - 6579 |
Influence of preparation methods and Zr and Y promoters on Cu/ZnO catalysts used for methanol steam reforming
Sanches SG, Flores JH, de Avillez RR, da Silva MIP |
| 6580 - 6600 |
Performance of a PEMFC system integrated with a biogas chemical looping reforming processor: A theoretical analysis and comparison with other fuel processors (steam reforming, partial oxidation and auto-thermal reforming)
da Silva AL, Dick LFP, Muller IL |
| 6601 - 6607 |
A multi-membrane reformer for the direct production of hydrogen via a steam-reforming reaction of methane
Hwang KR, Lee CB, Ryi SK, Lee SW, Park JS |
| 6608 - 6619 |
Transient reaction and exergy analysis of catalytic partial oxidation of methane in a Swiss-roll reactor for hydrogen production
Chen WH, Cheng YC, Hung CI |
| 6620 - 6625 |
Integrated methods to improve efficiency of furnace burning recovered tail gas
Lee CL, Jou CJG |
| 6626 - 6634 |
Hydrogen production and carbon dioxide enrichment using a catalytic membrane reactor with Ni metal catalyst and Pd-based membrane
Hwang KR, Lee CB, Ryi SK, Park JS |
| 6635 - 6645 |
Combined generation and separation of hydrogen in an electrochemical water gas shift reactor (EWGSR)
Oettel C, Rihko-Struckmann L, Sundmacher K |
| 6646 - 6652 |
New insights into the mechanism of activation and hydrogen absorption of (2LiNH(2)-MgH2)
Luo WF, Stavila V, Klebanoff LE |
| 6653 - 6665 |
Hydrogen adsorption on palladium dimer decorated graphene: A bonding study
Lopez-Corral I, German E, Juan A, Volpe MA, Brizuela GP |
| 6666 - 6673 |
First-principles study of the hydrogen absorption at Sigma 5 symmetrical tilt grain boundary in B2-TiFe alloy
Kulkova SE, Kulkov SS, Bakulin AV, Hocker S, Schmauder S |
| 6674 - 6685 |
Atomistic study of LaNbO4; surface properties and hydrogen adsorption
Hadidi K, Hancke R, Norby T, Gunnaes AE, Lovvik OM |
| 6686 - 6693 |
Investigation of wall stress development and packing ratio distribution in the metal hydride reactor
Okumura M, Terui K, Ikado A, Saito Y, Shoji M, Matsushita Y, Aoki H, Miura T, Kawakami Y |
| 6694 - 6699 |
Mg2FeH6-LiBH4 and Mg2FeH6-LiNH2 composite materials for hydrogen storage
Langmi HW, McGrady GS, Newhouse R, Ronnebro E |
| 6700 - 6713 |
Effects of nonmetal element (B, C and Si) additives in Mg2Ni hydrogen storage alloy: A first-principles study
Ding H, Zhang SL, Zhang YH, Huang SP, Wang P, Tian HP |
| 6714 - 6720 |
Enhancing hydrogen storage on carbon nanotubes via hybrid chemical etching and Pt decoration employing supercritical carbon dioxide fluid
Tsai PJ, Yang CH, Hsu WC, Tsai WT, Chang JK |
| 6721 - 6726 |
Enhancement of hydrogen adsorption by alkali-metal cation doping of metal-organic framework-5
Chu CL, Chen JR, Lee TY |
| 6727 - 6732 |
Assessment of changes in desorption mechanism of MgH2 after ion bombardment induced destabilization
Matovic L, Kurko S, Raskovic-Lovre Z, Vujasin R, Milanovic I, Milosevic S, Novakovic JG |
| 6733 - 6740 |
Hydrogen storage performance of 5LiBH(4)+Mg2FeH6 composite system
Deng SS, Xiao XZ, Han LY, Li Y, Li SQ, Ge HW, Wang QD, Chen LX |
| 6741 - 6748 |
Study of kinetics and thermal decomposition of ammonia borane in presence of silicon nanoparticles
Gangal AC, Kale P, Edla R, Manna J, Sharma P |
| 6749 - 6755 |
Ammonia borane thermolytic decomposition in the presence of metal (II) chlorides
Toche F, Chiriac R, Demirci UB, Miele P |
| 6756 - 6763 |
Catalytic dehydrogenation of cyclohexane over Ag-M/ACC catalysts for hydrogen supply
Pande JV, Shukla A, Biniwale RB |
| 6764 - 6770 |
High and rapid hydrogen release from thermolysis of ammonia borane near PEM fuel cell operating temperatures: Effect of quartz wool
Hwang HT, Al-Kukhun A, Varma A |
| 6771 - 6775 |
Hydrolysis reaction of ball-milled Mg-metal chlorides composite for hydrogen generation for fuel cells
Wang S, Sun LX, Xu F, Jiao CL, Zhang J, Zhou HY, Huang FL |
| 6776 - 6783 |
Reversible dehydrogenation of Mg(BH4)(2)-LiH composite under moderate conditions
Yang JZ, Fu H, Song P, Zheng J, Li XG |
| 6784 - 6789 |
Quantitative ranking criteria for PEMFC contaminants
St-Pierre J, Zhai YF, Angelo M |
| 6790 - 6797 |
Contamination and moisture absorption effects on the mechanical properties of catalyst coated membranes in PEM fuel cells
Jia RL, Dong SM, Hasegawa T, Ye JP, Dauskardt RH |
| 6798 - 6807 |
Internal currents in response to a load change during fuel cell start-up
Didierjean S, Lamibrac A, Geneston T, Rakotondrainibe A, Maranzana G, Rozier E, Beille F, Lottin O |
| 6808 - 6817 |
Maximizing the efficiency of a HT-PEMFC system integrated with glycerol reformer
Authayanun S, Mamlouk M, Arpornwichanop A |
| 6818 - 6829 |
Ionic Conductivity Method for measuring vaporized chromium species from solid oxide fuel cell interconnects
Casteel M, Lewis D, Willson P, Alinger M |
| 6830 - 6835 |
Electrochemical effects of cobalt doping on (La,Sr)(Ga,Mg)O3-delta electrolyte prepared by aerosol deposition
Choi JJ, Cho KS, Choi JH, Ryu J, Hahn BD, Yoon WH, Kim JW, Ahn CW, Park DS, Yun J |
| 6836 - 6843 |
Characterization of cation-ordered perovskite oxide LaBaCo2O5+delta as cathode of intermediate-temperature solid oxide fuel cells
Pang SL, Jiang XN, Li XN, Su ZX, Xu HX, Xu QL, Chen CL |
| 6844 - 6852 |
Further performance enhancement of a DME-fueled solid oxide fuel cell by applying anode functional catalyst
Su C, Wang W, Ran R, Zheng T, Shao ZP |
| 6853 - 6861 |
A comparative study of copper-cermet anode material synthesized by different technique
Shaikh SPS, Moharil SV, Nagrare BS |
| 6862 - 6874 |
Interfacial study between high temperature SiO(2-)B(2)O(3-)AO-La2O3 (A = Sr, Ba) glass seals and Crofer 22APU for solid oxide fuel cell applications
Kaur G, Pandey OP, Singh K |
| 6875 - 6879 |
Methanol-blocking Nafion composite membranes fabricated by layer-by-layer self-assembly for direct methanol fuel cells
Zhang HW, Huang HP, Shen PK |
| 6880 - 6885 |
Carbon-supported ultra-high loading Pt nanoparticle catalyst by controlled overgrowth of Pt: Improvement of Pt utilization leads to enhanced direct methanol fuel cell performance
You DJ, Kwon K, Joo SH, Kim JH, Kim JM, Pak C, Chang H |
| 6886 - 6892 |
CFD analysis of fast filling scenarios for 70 MPa hydrogen type IV tanks
Galassi MC, Baraldi D, Iborra BA, Moretto P |
| 6893 - 6900 |
Comparative evaluation of performance, emission, lubricant and deposit characteristics of spark ignition engine fueled with CNG and 18% hydrogen-CNG
Mathai R, Malhotra RK, Subramanian KA, Das LM |
| 6901 - 6911 |
Ignition delay study of moist hydrogen/oxidizer mixtures using a rapid compression machine
Das AK, Sung CJ, Zhang Y, Mittal G |
| 6912 - 6921 |
An experimental study of mild flameless combustion of methane/hydrogen mixtures
Ayoub M, Rottier C, Carpentier S, Villermaux C, Boukhalfa AM, Honore D |
| 6922 - 6932 |
Bifurcation analysis of the effect of hydrogen addition on the dynamic behavior of lean premixed pre-vaporized ethanol combustion
Garcia-Agreda A, Di Sarli V, Di Benedetto A |
| 6933 - 6941 |
Effects of ammonia substitution on combustion stability limits and NOx emissions of premixed hydrogen-air flames
Joo JM, Lee S, Kwon OC |
| 6942 - 6948 |
Hybrid filtration combustion of natural gas and coal
Toledo MG, Utria KS, Gonzalez FA, Zuniga JP, Saveliev AV |
| 6949 - 6964 |
Safety studies on high-pressure hydrogen vehicle refuelling stations: Releases into a simulated high-pressure dispensing area
Shirvill LC, Roberts TA, Royle M, Willoughby DB, Gautier T |
| 6965 - 6975 |
Application of the accident consequence analysis in the emergency system design of an SI cycle hydrogen production plant
Ruiz-Sanchez T, Nelson PF, Francois JL, Cruz-Gomez MJ, Mendoza A |
| 6976 - 6977 |
III Iberian Symposium on Hydrogen, Fuel Cells and Advanced Batteries, HYCELTEC-2011 Foreword
Barreras F, Lozano A, Mustata R, Valino L |
| 6978 - 6984 |
Molybdenum addition to modified iron oxides for improving hydrogen separation in fixed bed by redox processes
Romero E, Soto R, Duran P, Herguido J, Pena JA |
| 6985 - 6994 |
Water handling challenge on hydrolysis of sodium borohydride in batch reactors
Ferreira MJF, Rangel CM, Pinto AMFR |
| 6995 - 7004 |
Steam-iron process kinetic model using integral data regression
Plou J, Duran P, Herguido J, Pena JA |
| 7005 - 7016 |
Oxygen-enhanced water gas shift over ceria-supported Au-Cu bimetallic catalysts prepared by wet impregnation and deposition-precipitation
Gamboa-Rosales NK, Ayastuy JL, Gonzalez-Marcos MP, Gutierrez-Ortiz MA |
| 7017 - 7025 |
Study of the first step of the Mn2O3/MnO thermochemical cycle for solar hydrogen production
Marugan J, Botas JA, Martin M, Molina R, Herradon C |
| 7026 - 7033 |
Hydrogen production from methane and natural gas steam reforming in conventional and microreactor reaction systems
Izquierdo U, Barrio VL, Cambra JF, Requies J, Guemez MB, Arias PL, Kolb G, Zapf R, Gutierrez AM, Arraibi JR |
| 7034 - 7041 |
Mild temperature hydrogen production by methane decomposition over cobalt catalysts prepared with different precipitating agents
Jana P, O'Shea VAD, Coronado JM, Serrano DP |
| 7042 - 7055 |
Evolution of the Ni-active centres into ex hydrotalcite oxide catalysts during the COx-free hydrogen production by methane decomposition
Guil-Lopez R, La Parola V, Pena MA, Fierro JLG |
| 7056 - 7066 |
Diesel fuel reforming over catalysts derived from LaCo1-xRuxO3 perovskites with high Ru loading
Mota N, Alvarez-Galvan MC, Al-Zahrani SM, Navarro RM, Fierro JLG |
| 7067 - 7076 |
Catalytic decomposition of biogas to produce H-2-rich fuel gas and carbon nanofibers. Parametric study and characterization
de Llobet S, Pinilla JL, Lazaro MJ, Moliner R, Suelves I |
| 7077 - 7083 |
By-products inhibition effects on bio-hydrogen production
Castro-Villalobos MC, Garcia-Morales JL, Fernandez FJ |
| 7084 - 7093 |
Effect of ZrO2 addition on Ni/Al2O3 catalyst to produce H-2 from glycerol
Iriondo A, Cambra JF, Guemez MB, Barrio VL, Requies J, Sanchez-Sanchez MC, Navarro RM |
| 7094 - 7100 |
Hydrogen production from oxidative steam-reforming of n-propanol over Ni/Y2O3-ZrO2 catalysts
Yerman L, Homs N, de la Piscina PR |
| 7101 - 7108 |
Bioethanol steam reforming on Ni-based modified mordenite. Effect of mesoporosity, acid sites and alkaline metals
Da Costa-Serra JF, Navarro MT, Rey F, Chica A |
| 7109 - 7118 |
Electrooxidation of CO and methanol on well-characterized carbon supported PtxSn electrodes. Effect of crystal structure
Herranz T, Garcia S, Martinez-Huerta MV, Pena MA, Fierro JLG, Somodi F, Borbath I, Majrik K, Tompos A, Rojas S |
| 7119 - 7130 |
Analysis of performance losses of direct methanol fuel cell with methanol tolerant PtCoRu/C cathode electrode
Escudero-Cid R, Hernandez-Fernandez P, Perez-Flores JC, Rojas S, Garcia-Rodriguez S, Fatas E, Ocon P |
| 7131 - 7140 |
Ethanol oxidation on PtRuMo/C catalysts: In situ FTIR spectroscopy and DEMS studies
Garcia G, Tsiouvaras N, Pastor E, Pena MA, Fierro JLG, Martinez-Huerta MV |
| 7141 - 7151 |
Gas diffusion electrodes for methanol electrooxidation studied by a new DEMS configuration: Influence of the diffusion layer
Perez-Rodriguez S, Corengia M, Garcia G, Zinola CF, Lazaro MJ, Pastor E |
| 7152 - 7160 |
Electrochemical performance of Pd and Au-Pd core-shell nanoparticles on surface tailored carbon black as catalyst support
Celorrio V, de Oca MGM, Plana D, Moliner R, Fermin DJ, Lazaro MJ |
| 7161 - 7170 |
Perovskites based on La(Sr)-Mn-O system as electrocatalyst in PEM fuel cell of high temperature
Villaseca L, Moreno B, Chinarro E |
| 7171 - 7179 |
Electrocatalytic performance of different Mo-phases obtained during the preparation of innovative Pt-MoC catalysts for DMFC anode
Guillen-Villafuerte O, Guil-Lopez R, Nieto E, Garcia G, Rodriguez JL, Pastor E, Fierro JLG |
| 7180 - 7191 |
Influence of support's oxygen functionalization on the activity of Pt/carbon xerogels catalysts for methanol electro-oxidation
Alegre C, Galvez ME, Baquedano E, Pastor E, Moliner R, Lazaro MJ |
| 7192 - 7199 |
Development of a carbon paper-supported Pd catalyst for PEMFC application
Rego R, Oliveira MC, Alcaide F, Alvarez G |
| 7200 - 7211 |
Pt-Ru catalysts supported on carbon xerogels for PEM fuel cells
Calderon JC, Mahata N, Pereira MFR, Figueiredo JL, Fernandes VR, Rangel CM, Calvillo L, Lazaro MJ, Pastor E |
| 7212 - 7220 |
Performance of a poly(2,5-benzimidazole)-based polymer electrolyte membrane fuel cell
Linares JJ, Sanches C, Paganin VA, Gonzalez ER |
| 7221 - 7234 |
Nanostructured electrolyte membranes based on zeotypes, protic ionic liquids and porous PBI membranes: Preparation, characterization and MEA testing
Eguizabal A, Lemus J, Roda V, Urbiztondo M, Barreras F, Pina MP |
| 7235 - 7241 |
Performance of homogeneous and layered ceria/carbonate composite electrolytes
Saradha T, Fereira AS, Patricio SG, Figueiredo FML, Marques FMB |
| 7242 - 7251 |
Structural and electrochemical characterization of La2-xSrxNiTiO6-delta
Perez-Flores JC, Ritter C, Perez-Coll D, Mather GC, Canales-Vazquez J, Galvez-Sanchez M, Garcia-Alvarado F, Amador U |
| 7252 - 7261 |
Mechanochemical preparation, sintering aids and hybrid microwave sintering in the proton conductor Sr0.02La0.98Nb1-xVxO4-delta, x=0, 0.15
Brandao AD, Antunes I, Frade JR, Torre J, Mikhalev SM, Fagg DP |
| 7262 - 7270 |
Redox-cycling studies of anode-supported microtubular solid oxide fuel cells
Monzon H, Laguna-Bercero MA |
| 7271 - 7278 |
Use of gasification syngas in SOFC: Impact of real tar on anode materials
Lorente E, Millan M, Brandon NP |
| 7279 - 7288 |
PEMFC operation failure under severe dehydration
Sanchez DG, Garcia-Ybarra PL |
| 7289 - 7298 |
Design and development of the cooling system of a 2 kW nominal power open-cathode polymer electrolyte fuel cell stack
Lopez-Sabiron AM, Barroso J, Roda V, Barranco J, Lozano A, Barreras F |
| 7299 - 7308 |
Characterization of MEA degradation for an open air cathode PEM fuel cell
Silva RA, Hashimoto T, Thompson GE, Rangel CM |
| 7309 - 7315 |
Experimental characterization methodology for the identification of voltage losses of PEMFC: Applied to an open cathode stack
Husar A, Strahl S, Riera J |
