| 346 - 353 |
Evaluation of Vacuum Venting for Micro-injection Molding
Yoon SH, Padmanabha P, Cha NG, Mead JL, Barry CMF |
| 354 - 360 |
Effect of Mechanical Milling on the Thermal Behavior of Polyethylene Reinforced with Nano-sized Alumina
Tadayyon G, Zebarjad SM, Sajjadi SA |
| 361 - 367 |
Preparation of Poly(acrylic acid)-Poly(ethylene oxide) Nanofibers via Electrospinning and Investigation of Their Morphology
Shami Z, Sharifi-Sanjani N |
| 368 - 374 |
Concentration Effects of Organosilane (TESPD) on Mechanical Properties of Silica Filled Silicone Rubber/Natural Rubber Compounds
Dung TTN, Kim JK, Kim KJ |
| 375 - 382 |
Microcellular PP vs. Microcellular PP/MMT Nanocomposites: A Comparative Study of Their Mechanical Behavior
Rizvi SJA, Bhatnagar N |
| 383 - 387 |
Influence of Processing Conditions on Productivity, Thermal and Rheological Properties of Reprocessed Low Density Polyethylene
Pistor V, Chiesa A, Ornaghi HL, Fiorio R, Zattera AJ |
| 388 - 398 |
Optimization of Dispersion of Nanosilica Particles in a PP Matrix and Their Effect on Foaming
Lee SH, Zhang Y, Kontopoulou M, Park CB, Wong A, Zhai W |
| 399 - 402 |
Paint/Polymer Interface Structure for ABS Injection Moldings
Aoki Y, Aita M, Mizuochi Y, Kinumura T, Sugimoto M, Takimoto J, Koyama K, Kiritani H, Oomori M, Hirashima A |
| 403 - 415 |
Free Volume from Pressure and Temperature Dependent Viscosity and from PVT Measurements for Homo- and Copolymers
Halasz L, Huszar A |
| 416 - 423 |
Investigation into the Differences in the Selective Laser Sintering between Amorphous and Semi-crystalline Polymers
Yan C, Shi Y, Hao L |
| 424 - 428 |
Rheological Modeling and Dynamic Characteristics of Disc Extruders
Borisov AA, Berdyshev BV, Hosseini H, Shirkavand-Hadavand B |
| 429 - 436 |
The Effect of Polymer Additives on Surface Quality of Microcellular Injection Molded Parts
Lee J, Turng LS, Peng J, Dougherty E, Gorton P |
| 437 - 443 |
Using Supercritical Carbon Dioxide for Physical Foaming of Advanced Polymer Materials
Wolff F, Zirkel L, Betzold S, Jakob M, Maier V, Nachtrab F, Nicolat BC, Fey T, Munsteadt H |
| 444 - 455 |
Effect of Ionomer on Barrier and Mechanical Properties of PET/Organoclay Nanocomposites Prepared by Melt Compounding
Xu XF, Ghanbari A, Leelapornpisit W, Heuzey MC, Carreau P |
| 456 - 459 |
Triangle Rule for Operating Windows and Scale-up Criteria for Volume Resistivity of PP/Carbon Nanotubes Composites
Polrut W, Boonliang B, Tanthapanichakoon W, Damronglerd S |
| 460 - 463 |
Crystallization in Polymer Melts: Metamorphism of Flow Induced Nuclei
Janeschitz-Kriegl H, Ratajski E |
