| 1 - 12 |
Swelling and thermal characteristics of pH sensitive crosslinked poly(acrylamide-co-calcium methacrylate) superabsorbent copolymers
Mohan YM, Murthy PSK, Sreedhar B, Raju KM |
| 13 - 21 |
Polymeric proton conducting systems based on commercial elastomers. III. Microstructural and electrical characterization of films based on HSBS/EPDM/PP/PS/silica
Escribano PG, Nacher A, Del Rio C, Gonzalez L, Acosta JL |
| 22 - 28 |
Homoleptic lanthanide amidinate complexes: A single-component initiator for ring-opening polymerization of trimethylene carbonate and copolymerization with epsilon-caprolactone
Li C, Wang YR, Zhou LY, Sun HM, Shen Q |
| 29 - 38 |
Moisture sorption and thermal characteristics of polyaramide blend fabrics
Genc G, Alp B, Balkose D, Ulku S, Cireli A |
| 39 - 45 |
Preparation of core/shell PVP/PLA ultrafine fibers by coaxial electrospinning
Sun B, Duan B, Yuan XY |
| 46 - 51 |
Biodegradation of poly(L-aspartic acid-co-valine) and its derivatives
Tang GP, He BB |
| 52 - 57 |
4.4'-Bismaleimidodiphenyl methane modified novolak resin/titania nanocomposites: Preparation and properties
Lu GT, Huang Y, Yan YH, Zhao T, Yu YZ |
| 58 - 68 |
Physicomechanical and hydrophobic properties of starch foams extruded with different biodegradable polymers
Nabar YU, Draybuck D, Narayan R |
| 69 - 75 |
Biocomposites synthesized from chemically modified soy oil and biofibers
Tran P, Graiver D, Narayan R |
| 76 - 83 |
Morphology transition of bismaleimide-modified novolac resin
Lu GT, Huang Y, Yan YH, Zhao T, Yu YZ |
| 84 - 95 |
Preparation and characterization of highly swelling smart grafted polymer networks of poly(vinyl alcohol) and poly(acrylic acid-co-acrylamide)
Shukla S, Bajpai AK |
| 96 - 103 |
Gradient polymeric materials based on poorly compatible epoxy oligomers
Amirova LM, Andrianova KA |
| 104 - 118 |
Crystallization behavior of carbon black-filled polypropylene and polypropylene/epoxy composites
Li Y, Wang SF, Zhang Y, Zhang YX |
| 119 - 127 |
Pulverization of rubber using modified solid state shear extrusion process (SSSE)
Shahidi N, Arastoopour H, Ivanov G |
| 128 - 139 |
Effect of the average soft-segment length on the morphology and properties of segmented polyurethane nanocomposites
Finnigan B, Halley P, Jack K, McDowell A, Truss R, Casey P, Knott R, Martin D |
| 140 - 148 |
Physical and electrochemical characterizations of poly(vinylidene fluoride-co-hexafluoropropylene)/SiO2-based polymer electrolytes prepared by the phase-inversion technique
Kim KM, Park NG, Ryu KS, Chang SH |
| 149 - 165 |
Morphology and cure kinetics of unsaturated polyester resin/block copolymer blends
Boyard N, Sinturel C, Vayer M, Erre R |
| 166 - 174 |
Particle size and size distribution of styrene/sulfopropylmethacrylate/2,2'-azobis[2-methyl-N-(2-hydroxyethyl) propionamide] (styrene/SPM/VA-086) and styrene/N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) ammonium betain [styrene/SPE/oil-soluble 1,1-azo-bis(cyclohexanecarbonitrile)]-initiated latices, using a zetasizer and atomic force microscopy
Sadiku ER, Sanderson RD |
| 175 - 182 |
Synthesis of star-shaped poly(epsilon-caprolactone) by samarium-based tetrafunctional initiator and its dilute-solution properties
Xi XJ, Jiang LM, Ling J, Sun WL, Shen ZQ |
| 183 - 191 |
Solvent-induced partial cyanoethylation and hydroxylation of cyanoethyl group
Subha AS, Thambidurai S |
| 192 - 197 |
Synthesis and amphiphilic 4-vinyl pyridine and n-vinyl pyrrolidone copolymer beads
Sambasivudu K, Maheedhar G, Rao VS, Kumar MVS, Shailaja D |
| 198 - 203 |
gamma-Radiation-induced graft copolymerization of acrylic acid onto poly(ethylene terephthalate) films: A study by thermal analysis
Kattan M, El-Nesr E |
| 204 - 209 |
The effect of gamma-irradiation on thermal strain of high strength polyethylene fiber at low temperature
Yamanaka A, Izumi Y, Kitagawa T, Terada T, Hirahata H, Ema K, Fujishiro H, Nishijima S |
| 210 - 221 |
Effects on the structure and properties of membranes formed by blending polydimethylsiloxane polyurethane into different soft-segment waterborne polyurethanes
Yen MS, Tsai PY |
| 222 - 226 |
Amino-capped aniline trimer/epoxy resin intercrosslinked networks
Yang XJ, Jiang YB, Zhao T, Yu YZ |
| 227 - 232 |
Modification and characterization of poly(ethylene-co-vinyl alcohol) by glycosidation reaction
Liu BY, Xue ZX, Liu L, Zhang L, Liu F |
| 233 - 241 |
Interaction of spherical polyelectrolyte brushes with calcium carbonate and cellulose fibers: Mechanistic studies and their application in papermaking
Mei Y, Abetz C, Birkert O, Schadler V, Leyrer RJ, Ballauff M |
| 242 - 247 |
Influence of moisture regain of aramid fibers on effects of atmospheric pressure plasma treatment on improving adhesion with epoxy
Liu L, Jiang Q, Zhu T, Guo X, Sun Y, Guan Y, Qiu Y |
| 248 - 256 |
Distribution of carbon black in natural rubber/acrylic rubber blends
Wootthikanokkhan J, Rattanathamwat N |
| 257 - 260 |
Effect of fatty amine and perfluorocarbon as anti-fouling agent on the catalyst activity and titanium oxidation state in slurry polymerization of ethylene
Mousavi M, Hakim S, Nekoomanesh M |
| 261 - 265 |
Failure of multimaterial fusion bonding interface generated during over-injection molding/thermoforming hybrid process
Aurrekoetxea J, Castillo G, Cortes F, Sarrionandia MA, Urrutibeascoa I |
| 266 - 271 |
Effects of the photoacid generator type on the imaging and thermal decomposition properties of photodefinable, thermally sacrificial poly(propylene carbonate) materials
White CE, Balogun A, Henderson CL |
| 272 - 275 |
Interaction between polyacrylonitrile and alkalis
Hou C, Qun W, Qu RJ, Wang CG |
| 276 - 284 |
Functionalization of chitosan membranes through phosphorylation: Atomic force microscopy, wettability, and cytotoxicity studies
Amaral IF, Granja PL, Melo LV, Saramago B, Barbosa MA |
| 285 - 288 |
Ultraviolet grafting of styrene and maleic anhydride on polyethylene-terephthalate film
Zhou YF, Bai YP, Wei JG |
| 289 - 294 |
Finite difference solutions of the heat equation in a molten polymer flowing in a circular tube
Leong CH, Mohr DG, Elgindi MBM, Langer RW |
| 295 - 302 |
The properties and morphologies of composites based on sulfated EPDM ionomer toughed polypropylene highly filled with Mg(OH)2
Su ZP, Jiang PK, Li Q, Wei P |
| 303 - 311 |
Molecular structure and ion exchange of amidoximated cellulosic materials
Nada AMA, El-Wakil NA |
| 312 - 314 |
Variation of inhibited oxidation parameters in the range of phase transition
Kalinina IG, Gumargalieva KZ, Shlyapnikov YA |
| 315 - 319 |
Study on properties of low dielectric loss resin matrix
Yang JY, Liang GZ, Li L |
| 320 - 332 |
Evaluation of anionic- and cationic-supported hydrogel membranes for sorption of Th(IV) and U(VI) ions from nitric acid medium
Hegazy EA, El-Gammal B, Khalil FH, Mabrouk TM |
| 333 - 337 |
Modification of a carbon/carbon composite with a thermosetting resin precursor as a matrix by the addition of carbon black
Ko TH, Kuo WS, Han WT, Day TC |
| 338 - 347 |
Technological evaluation of reactive cyclodextrin in cotton printing with reactive and natural dyes
Hebeish AA, Ragheb AA, Nassar SH, Allam EE, Abd El Thalouth JI |
| 348 - 357 |
Synthesis of novel macromonomeric peroxy initiators of styrene with the cationic copolymerization and the quantum chemically investigation of the initiation system effects
Kul D, Yilmaz SS, Ozturk T, Usta A, Misir M |
| 358 - 361 |
New aspects of polymeric sheet punch deformation
Daukantiene V, Bernotiene B, Gutauskas M |
| 362 - 368 |
Controlling optical properties of a novel light-modulation device consisting of colored N-isopropylacrylamide gel particles dispersed in a poly(vinyl alcohol) solution
Tsutsui H, Akashi R |
| 369 - 379 |
Synthesis and characterization of modified bismaleimide/polysulfone semi-interpenetrating polymer networks
Kurdi J, Kumar A |
| 380 - 386 |
Investigation on gradient dielectric characteristics of bamboo (Dentroclamus strictus)
Chand N, Jain D, Nigrawal A |
| 387 - 394 |
Wetting behavior of thermally bonded polyester nonwoven fabrics: The importance of porosity
Zhu L, Perwuelz A, Lewandowski M, Campagne C |
| 395 - 400 |
Swelling and release kinetics of larvicide-containing chitosan/cashew gum beads
Paula HCB, de Paula RCM, Bezerral SKF |
| 401 - 407 |
Stress relaxation of woodfiber-thermoplastic composites
Bhattacharyya D, Manikath J, Jayaraman K |
| 408 - 415 |
Initiator-fragment incorporation radical polymerization of diallyl phthalate: Kinetics, formation of hyperbranched polymer, and iridescent porous film thereof
Sato T, Nomura K, Hirano T, Seno M |
| 416 - 423 |
A study on the moisture sorption characteristics in woven sisal fabric reinforced natural rubber biocomposites
Jacob M, Varughese KT, Thomas S |
| 424 - 428 |
Properties of silk fibers modified with diethylene glycol dimethacrylate
Chen GQ, Guan JP, Xing TL, Zhou X |
| 429 - 435 |
Microfabrication by X-ray-induced polymerization above the lower critical solution temperature
Tirumala VR, Caneba GT, Mancini DC, Wang HH |
| 436 - 444 |
Chitosan and chitosan-PEO blend membranes crosslinked by genipin for drug release
Jin J, Song M |
| 445 - 451 |
In vitro comparative hemostatic studies of chitin, chitosan, and their derivatives
Janvikul W, Uppanan P, Thavornyutikarn B, Krewraing J, Prateepasen R |
| 452 - 459 |
Polymer blends of epoxy resin and epoxidized natural rubber
Chuayjuljit S, Soatthiyanon N, Potiyaraj P |
| 460 - 471 |
Dissolution enhancement of flavonoids by solid dispersion in PVP and PEG matrixes: A comparative study
Kanaze FI, Kokkalou E, Niopas I, Georgarakis M, Stergiou A, Bikiaris D |
| 472 - 478 |
Zone-drawing and zone-annealing of poly(L-lactic acid) microfiber prepared by CO2 laser-thinning method
Suzuki A, Mizuochi D |
| 479 - 488 |
Influence of PS-b-PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends
Tercjak A, Serrano E, Martin MD, Marieta C, Mondragon I |
| 489 - 493 |
Homogeneous graft copolymerization of chitosan with butyl acrylate by gamma-irradiation via a 6-O-maleoyl-N-phthaloyl-chitosan intermediate
Huang MF, Xia X, Zhang ZC, Liu L, Fang Y |
| 494 - 505 |
Colored rubber vulcanizates with some magnetic properties
El-Sabbagh SH, Ahmed NM, Daoush WM |
| 506 - 515 |
gamma-irradiation effects on the thermal and structural characteristics of modified, grafted polypropylene
Khalil MMI, El-Sawy NM, El-Shobaky GA |
| 516 - 522 |
Synthesis of asymmetric star-branched block copolymers based on PS, PTHF, and PMMA by combination of cationic ring opening polymerization and redox polymerization methods
Arslan H, Hazer B, Higashihara T, Hirao A |
| 523 - 529 |
Mechanical and tribological properties of PA66/PPS blend. III. Reinforced with GF
Chen ZB, Liu XJ, Lu RG, Li TS |
| 530 - 534 |
Effect of physical aging on the microstructure and dynamic mechanical properties of poly(ether sulfone) copolymer
Zhou XM, Jiang ZH |
| 535 - 541 |
In situ polymerization of aniline in the presence of carbon black
Souza FG, Sirelli L, Michel RC, Soares BG, Herbst MH |
| 542 - 549 |
Morphology and melt rheology of nylon 11/clay nanocomposites
He XF, Yang J, Zhu LC, Wang B, Sun GP, Lv PF, Phang IY, Liu TX |
| 550 - 557 |
Synthesis and characterization of superabsorbent hydrogels composites based on polysuccinimide
Yang J, Fang L, Tan TW |
| 558 - 563 |
Vitrification, devitrification, and dielectric relaxations during the non-isothermal curing of diepoxy-cycloaliphatic diamine
Montserrat S, Roman F, Colomer P |
| 564 - 570 |
Flammability and thermal degradation behaviors of phosphorus-containing copolyester/BaSO4 nanocomposites
Qu MH, Wang YZ, Liu Y, Ge XG, Wang DY, Wang C |
| 571 - 576 |
Two-step consecutive reaction model and kinetic parameters relevant to the decomposition of Chinese forest fuels
Chen HX, Liu NA, Fan WC |
| 577 - 587 |
Syntheses of poly(lactic acid)-poly(ethylene glycol) serial biodegradable polymer materials via direct melt polycondensation and their characterization
Wang ZY, Zhao YM, Wang F |
| 588 - 597 |
Influence of the network structure and void content on hygrothermal stability of resol resin modified with epoxy-amine
Manfredi LB, Fraga AN, Vazquez A |
| 598 - 606 |
Effects of compatibilizer type and rubber-wood sawdust content on the mechanical, morphological, and thermal properties of PVC/LDPE blend
Prachayawarakorn J, Khamsri J, Chaochanchaikul K, Sombatsompop N |
| 607 - 615 |
Synthesis of thermoplastic polyurethane and its physical and shape memory properties
Wang HH, Yuen UE |
| 616 - 622 |
Correlation of C-13-NMR analysis with fungal decay tests of polymeric structural wood constituents. II. Ground contact tests
Boonstra MJ, Pizzi A, Rigolet S |
| 623 - 632 |
Effects of crystallinity on solid-state polymerization of poly(ethylene terephthalate)
Duh B |
| 633 - 639 |
Tris(trimethylsilyl)methyl functionalized 4-chloromethyl styrene polymers: Effects of side chain modification on polymer structure and glass transition temperature
Babazadeh M |
| 640 - 645 |
Preparation and properties of a poly(2-cyano-1,4-phenylene terephthalamide)/layered silicate nanocomposite
Park SY, Lee SW, Oh TJ |
| 646 - 654 |
Preparation and properties of T300 carbon fiber-reinforced thermoplastic polyimide composites
Lu YH, Zhan MS, Zheng WH |
| 655 - 662 |
Preparation and crystallization of poly(ethylene terephthalate)/SiO2 nanocomposites by in-situ polymerization
Yang YZ, Xu H, Gu HC |
| 663 - 673 |
Temperature dependence of gel properties of two-component physical gels
Mao CF |
| 674 - 678 |
Solvents effect in horseradish peroxidase catalyzed modification of UHMWPE fiber
Fan GN, Zhao JC, Yuan HG, Guo Z, Wang JL, Liang GZ |
| 679 - 683 |
Preparation of porous poly(lactic acid)/SiO2 hybrid microspheres
Wang HL, Fang MS, Shi TJ, Zhai LF, Tang C |
| 684 - 689 |
Transverse alignment of liquid crystalline epoxy resin on carbon fiber surface
Lee JY |
| 690 - 697 |
Synthesis and characterization of triglyceride-based polyols and tack-free coatings via the air oxidation of soy oil
Fornof AR, Onah E, Ghosh S, Frazier CE, Sohn S, Wilkes GL, Long TE |
| 698 - 702 |
Fire-retardant properties of the viscose rayon containing alkoxycyclotriphosphazene
Chen S, Zheng QK, Ye GD, Zheng GH |
| 703 - 706 |
Preparation and characterization of P(AN/VAC)/clay based nanocomposites
Gu XH, Xi P, Jia YT, Liu T, Shen XY |
| 707 - 714 |
Physico-mechanical, dynamic mechanical, and swelling properties of sodium chloride filled chlorobutyl vulcanizates
Sridhar V, Tripathy DK |
| 715 - 720 |
Bound rubber in chlorobutyl compounds: Influence of filler type and storage time
Sridhar V, Gupta BR, Tripathy DK |
| 721 - 728 |
Flame-retardant ABS resins from novel phenyl isocyanate blocked novolac phenols and triphenyl phosphate
Ji Y, Kim J, Bae JY |
| 729 - 736 |
Effects of arm number on the properties of transparent elastomers prepared from styrene-butadiene block copolymer
Ma R, Zhang ZJ, Zhang LN |
| 737 - 743 |
Biodegradable studies of poly(trimethylenecarbonate-epsilon-caprolactone)-block-poly(p-dioxanone) , poly(dioxanone), and poly(glycolide-epsilon-caprolactone) (Monocryl (R)) monofilaments
Hong JT, Cho NS, Yoon HS, Kim TH, Koh MS, Kim WG |
| 744 - 750 |
Photoregulated complexation, redox behavior, and photoluminescence of a supramolecular polymer solution
Dahmane S, Zhao Y |
| 751 - 757 |
Preparation and physical properties of films prepared by crosslinking 1,9-bis(glycidyloxypropyl)pentasiloxanes with alpha,omega-bis(3-aminopropyl)polydimethylsiloxane and their settlement and release properties
Lee NS, Callow JA, Callow ME, Finlay JA, Weber WP |
| 758 - 767 |
Radiation crosslinking of biodegradable carboxymethylchitin and carboxymethylchitosan
Wasikiewicz JM, Mitomo H, Nagasawa N, Yagi T, Tamada M, Yoshii F |
| 768 - 771 |
Effect of selected boroorganic compounds on thermal and heat properties of rigid polyurethane-polyisocyanurate foams
Czuprynski B, Liszkowska J, Paciorek-Sadowska J |
| 772 - 776 |
Fractionation of a silk fibroin hydrolysate and its protective function of hydrogen peroxide toxicity
Yeo JH, Lee KG, Kweon HY, Woo SO, Han SM, Kim SS, Demura M |
| 777 - 785 |
Structure and properties of nanocomposites based on poly(butylene succinate) and organically modified montmorillonite
Ray SS, Okamoto K, Okamoto M |
| 786 - 797 |
Studies on synthesis, characterization, and metal adsorption of mimosa and valonia tannin resins
Ozacar M, Soykan C, Sengil IA |
| 798 - 803 |
Preparation of porous carbon microspheres
Lu YG, Yang CL, Rong HQ, Pan D |
| 804 - 809 |
Crystallization behavior of polyhydroxybutyrate in model comnosites with kenaf fibers
Buzarovska A, Bogoeva-Gaceva G, Grozdanov A, Avella M |
| 810 - 819 |
Characterization of 25 tropical hardwoods with Fourier transform infrared, ultraviolet resonance Raman, and C-13-NMR cross-polarization/magic-angle spinning spectroscopy
Nuopponen MH, Wikberg HI, Birch GM, Jaaskelainen AS, Maunu SL, Vuorinen T, Stewart D |
| 820 - 824 |
Synthesis of polyethylene oxide hydrogels by electron radiation
Branca C, Magazu S, Maisano G, Auditore L, Barna RC, De Pasquale D, Ernanuele U, Trifiro A, Trimarchi M |
| 825 - 832 |
Biodegradation and the dynamic mechanical properties of starch gelatinization in poly(epsilon-caprolactone)/corn starch blends
Rosa DD, Volponi JE, Guedes CDF |
| 833 - 840 |
Effect of maleated polypropylene as coupling agent for polypropylene composites reinforced with hemp strands
Mutje P, Vallejos ME, Girones J, Vilaseca F, Lopez A, Lopez JP, Mendez JA |
| 841 - 846 |
Melt grafting of poly(ethylene-vinyl acetate) copolymer with maleic anhydride
Yin J, Zhang J, Yao Y |
| 847 - 851 |
Rheological properties of ethylcellulose latex
Gallardo V, Morales ME, Lopez-Viota J, Duran JDG, Ruiz MA |
| 852 - 856 |
Stiffening agent for cotton woven fabrics made from methacrylic acid vinyl acetate methylacrylate terpolymer
Moustafa AF |
| 857 - 863 |
Concentrated emulsion polymerization for preparation of beta-cyclodextrin-supported chromatography columns
Baharvand H, Zeynali ME, Rabiee A |
| 864 - 875 |
Research on the molecular entanglement and disentanglement in the dry spinning process of UHMWPE/decalin solution
Sun YS, Duan YR, Chen XY, Zhang Q, Jin XF, Li XJ, Ma Y, Sun L, Wang QR |
| 876 - 884 |
The tensile properties of strain-crystallizing vulcanizates. III. The superiority of conventional over peroxide vulcanizates in terms of network microstructure
Van Der Horst M, McGill WJ, Woolard CD |
| 885 - 896 |
Chitosan-graft-acrylamide polyelectrolytes: Synthesis, flocculation, and modeling
Laue C, Hunkeler D |
| 897 - 903 |
Oscillatory measurements for salad dressings stabilized with modified starch, xanthan gum, and locust bean gum
Dolz M, Hernandez MJ, Delegido J |
| 904 - 908 |
Acrylonitrile/ammonium itaconate aqueous deposited copolymerization
Cui CS, Wang CG, Zhao YQ |
| 909 - 919 |
Plasma-induced solid-state polymerization modified poly(tetrafluoroethylene) membrane for pervaporation separation of aqueous alcohol mixtures
Li CL, Tu CY, Inagaki N, Lee KR, Lai JY |
| 920 - 926 |
Preparation and properties of microporous cellulose membranes from novel cellulose/aqueous sodium hydroxide solutions
Cao Y, Tan HM |
| 927 - 934 |
Superabsorbent polymeric materials. XIII. Effect of oxyethylene chain length on water absorbency for the sodium acrylate and poly(ethylene glycol) methyl ether acrylate (PEGMEA(n)) copolymeric gels
Lee WF, Yang LG |
| 935 - 943 |
Preparation and characterization of poly(2-chloroaniline)/SiO2 nanocomposite via oxidative polymerization: Comparative UV-vis studies into different solvents of poly(2-chloroaniline) and poly(2-chloroaniline)/SiO2
Gok A, Sen S |
