| 1 - 8 |
Performance characterization of comvosite materials based on recycled high-density polyethylene and ground tire rubber reinforced with short glass fibers for structural applications
Shojaei A, Yousefian H, Saharkhiz S |
| 9 - 14 |
Pyrolysis studies of polyethylene terephthalate/silica nanocomposites
Zheng J, Cui P, Tian XY, Zheng K |
| 15 - 20 |
Covolvmerization of carbon dioxide and provvlene oxide with zinc glutarate in the presence of compounds containing active hydrogen
Gao LJ, Xiao M, Wang SJ, Du FG, Meng YZ |
| 21 - 26 |
Synthesis of conducting polyaniline/TiO2 composite nanofibres by one-step in situ polymerization method
Bian CQ, Yu YJ, Xue G |
| 27 - 34 |
Amelioration of acrylonitrile-butadiene copolymer properties using natural rubber graft p-aminophenol
El-Wakil AA |
| 35 - 43 |
Synthesis of multi-block copolymer and its compatibilization to the blends of poly(ether ether ketone) with thermotropic liquid crystalline polymer
Yang YH, Zhu WC, Jiang D, Ma RT, Jiang ZH |
| 44 - 50 |
Phospholipid polymer hydrogel formed by the photodimerization of cinnamoyl groups in the polymer side chain
Yamaguchi J, Watanabe J, Takai M, Ishihara K |
| 51 - 57 |
Photodegradation of multilayer films based on PET copolymers
Fechine GJM, Souto-Maior RM, Rabello MS |
| 58 - 65 |
Dipping characteristics of layered silicates-natural rubber latex nanocomposites
Mathew S, Varghese S, Rajammal G, Thomas PC |
| 66 - 69 |
Compatibilization of polypropylene/molecular sieves type 13X based on carboxyled polypropylene
Ma ZL, Guo HY |
| 70 - 74 |
Die-swell behavior during the short-tube flow of rubber compounds
Liang JZ |
| 75 - 80 |
Synthesis, characterization, and fluorescence of end-functionalized polystyrene initiated by 4-chloromethyl benzoic acid and ethyl 4-chloromethyl benzenecarboxylate via ATRP
Lu JM, Xu QF, Yuan X, Xia XW, Zhai JX, Wang LH |
| 81 - 88 |
Synthesis and characterization of novel polyurethanes based on 2,6-bis(4-hydroxybenzylidene) cyclohexanone hard segments
Raghu AV, Anita G, Barigaddi YM, Gadaginamath GS, Aminabhavi TM |
| 89 - 94 |
Effect of flow history on poly(vinylidine fluoride) crystalline phase transformation
Sobhani H, Razavi-Nouri M, Yousefi AA |
| 95 - 101 |
Miscibility and rheological properties of poly(vinyl chloride)/styrene-acrylonitrile blends prepared by melt extrusion
Moon HS, Choi WM, Kim MH, Park OO |
| 102 - 110 |
Phase morphology development during processing of compatibilized and uncompatibilized PBT/ABS blends
Canto LB, Mantovani GL, Covas JA, Hage E, Pessan LA |
| 111 - 117 |
Cotton fabric surface modification for improved UV radiation protection using sol-gel process
Abidi N, Hequet E, Tarimala S, Dai LL |
| 118 - 129 |
Interfacial properties of highly oriented coextruded polypropylene tapes for the creation of recyclable all-polypropylene composites
Alcock B, Cabrera NO, Barkoula NM, Loos J, Peijs T |
| 130 - 136 |
Soy protein adhesion enhanced by glutaraldehyde crosslink
Wang Y, Mo X, Sun XS, Wang DH |
| 137 - 146 |
Poly(ethylene terephthalate)/polypropylene microfibrillar composites. III. Structural development of poly(ethylene terephthalate) microfibers
Leung FKP, Cheung WL, Lin XD, Jia D, Chung CY |
| 147 - 155 |
Effects of ozone treatment on the properties of raw and degummed tassar silk fabrics
Sargunamani D, Selvakumar N |
| 156 - 161 |
Thermal behaviors and flame-retardancy of styrene-ethylene-butadiene-styrene-block copolymer containing various additives
Ishikawa T, Takasa K, Yamashita T, Mizuno K, Takeda K |
| 162 - 170 |
Synthesis and characterization of TRITON (TM) X-based surfactants with carboxylic or amino groups in the oxyethylene chain end
Lee DI, Choi JY, Lee ES, Ha CS, Han M, Bae JY |
| 171 - 177 |
Flexural, compression, chemical resistance, and morphology studies on granite powder-filled epoxy and acrylonitrile butadiene styrene-toughened epoxy matrices
Ramakrishna HV, Priya SP, Rai SK |
| 178 - 182 |
Melt flow properties of starch-filled linear low density polyethylene: Effect of photoinitiators
Bagheri R, Naimian F |
| 183 - 191 |
Properties of poly(AAc-co-HPMA-cl-EGDMA) hydrogel-bound lipase of Pseudomonas aeruginosa MTCC-4713 and its use in synthesis of methyl acrylate
Kanwar SS, Verma ML, Maheshwari C, Chauhan S, Chimni SS, Chauhan GS |
| 192 - 199 |
Morphological analysis of the tiger stripe on injection molding of polypropylene/ethylene-propylene rubber/talc blends dependent on based polypropylene design
Hirano K, Suetsugu Y, Kanai T |
| 200 - 204 |
Polyelectrolyte CASA hydrogels for uptake of uranyl ions from aqueous solutions
Karadag E, Uzum OB, Kundakci S, Saraydin D |
| 205 - 211 |
Novel CO2 laser drawing of thermotropic liquid crystal polymer and poly(ethylene 2,6-naphthalate) blend fibers
Kim SY, Kim SH, Kim JY, Cho HH |
| 212 - 219 |
Synthesis and characterization of novel soluble pyridine-containing polyimides based on 4-phenyl-2, 6-bis[4-(4-aminophenoxy)phenyl]-pyridine and various aromatic dianhydrides
Wang XL, Li YF, Gong CL, Zhang SJ, Ma T |
| 220 - 225 |
Biocompatibility and antibacterial activity of chitosan and hyaluronic acid immobilized polyester fibers
Jou CH, Yuan L, Lin SM, Hwang MC, Chou WL, Yu DG, Yang MC |
| 226 - 233 |
Blends of polypropylene with solid silicone additive
Munoz MP, Werlang MM, Nachtigall SMB, Cardozo NSM, Mauler RS |
| 234 - 237 |
Microstructured conducting polymer coatings on plastic strip for contact electrodes: Formulation and tuning of sheet resistance
Daniel A, Fotheringham A |
| 238 - 246 |
Microcomposite electrochemical capacitor: Electrocoating of poly[N-(hydroxymethyl)carbazole] onto carbon fiber, surface morphology, spectroscopic surface characterization, electrochemical impedance spectroscopy
Sarac AS, Parlak EA, Serhatli E, Cakir T |
| 247 - 252 |
Influence of pigment properties on UV-curing efficiency
Macarie L, Ilia G |
| 253 - 260 |
Mathematical modeling of insulin sorption by ion-exchange fiber
Medovic A, Skundric P, Pajic-Lijakovic I, Kostic M |
| 261 - 266 |
Facile fabrication of macroporous polyimide films with pores distributing on one side
Deng YQ, Zhou HW, Dang GD, Rao XH, Chen CH |
| 267 - 272 |
Linear-dendritic ABA triblock copolymers as nanocarriers
Adeli M, Zarnegar Z, Dadkhah A, Hossieni R, Salimi F, Kanani A |
| 273 - 278 |
Novel poly(vinyl alcohol)-tetraethoxysilane hybrid matrix membranes as oxygen barriers
Patil MB, Patil SA, Veerapur RS, Aminabhavi TM |
| 279 - 285 |
Poly(ethylene terephthalate) copolymers that contain 5-tert-butylisophthalic acid and 1-3/1-4-cyclohexanedimethanol: Synthesis, characterization, and properties
Tsai Y, Fan CH, Hung CY, Tsai FJ |
| 286 - 289 |
Influence of enzymatic treatment on the properties of linen
Kan CW, Yuen CWM, Jiang SQ, Tung WS, Cheng SY |
| 290 - 296 |
Preparation of genipin-fixed agarose hydrogel
Meena R, Prasad K, Siddhanta AK |
| 297 - 303 |
Polyaniline encapsulated microporous polymer beads and their vapor and gas adsorption behavior
Deb PC, Rajput LD, Singh PK |
| 304 - 309 |
Synthesis and mesomorphic properties of side-chain liquid crystalline ionomers containing sulfonic acid groups
Zhang BY, Sun QJ, Tian M, Ren SC |
| 310 - 317 |
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao RG, Yang B, Yu W, Zhou CX |
| 318 - 324 |
Effect of clay on properties of polyimide-clay nanocomposites
Wang HW, Dong RX, Liu CL, Chang HY |
| 325 - 330 |
Degree of conversion versus the depth of polymerization of an organically modified ceramic dental restoration composite by Fourier transform infrared spectroscopy
Silva FF, Mendes LC, Ferreira M, Benzi MR |
| 331 - 338 |
Thermal, mechanical, and adhesive properties of HDPE/reactive ethylene terpolymer blends
Love CT, Xian G, Karbhari VM |
| 339 - 344 |
Strength properties of polyimideamide nanocomposite fibers in terms of their porous and supermolecular structure
Mikolajczyk T, Rabiej S, Olejnik M, Urbaniak-Domagala W |
| 345 - 351 |
The transient nature of maximum maleic anhydride grafting of polypropylene: A mechanistic approach based on a consecutive reaction model. II. A comparison of the batch solution and molten state processes
Garcia-Martinez JM, Areso S, Collar EP |
| 352 - 359 |
Rheological properties of poly(methyl methacrylate)/rigid ladderlike polyphenylsilsesquioxane blends
Li GZ, Matsuda T, Nishioka A, Liang KW, Masubuchi Y, Koyama K, Pittman CU |
| 360 - 364 |
Fluorescence excitation spectroscopy of polystyrene near the critical concentration c
Healy MS, Hanson JE |
| 365 - 371 |
Synthesis and nonlinear optical properties of polyphosphazenes with binaphtholyl and indole side groups
Li Z, Qin JG, Yang Z, Ye C |
| 372 - 377 |
Polymer blends of carboxylated butadiene-acrylonitrile copolymer (nitrile rubber) and polyamide 6 developed in twin screw extrusion
Chowdhury R, Banerji MS, Shivakumar K |
| 378 - 390 |
Migration of substituted aromatic solvents into polyurethane/polystyrene semi-interpenetrating polymer network
Kumar H, Siddaramaiah |
| 391 - 397 |
Thermal oxidative degradation of bicomponent PP/PET fiber during thermal bonding process
Wang XY, Gong RH |
| 398 - 409 |
Cellulose fibers modified by hydrophobic-type polymer
Kulpinski P |
| 410 - 414 |
Preparation of high molecular weight poly(vinyl pivalate) with high yield and high molecular weight poly(vinyl alcohol) by emulsion polymerization of vinyl pivalate and saponification
Song DH, Lyoo WS |
| 415 - 421 |
Preparation and property of raspberry-like AS/SiO2 nanocomposite particles
Zhang H, Su Z, Liu P, Zhang FZ |
| 422 - 426 |
Preparation of Ag nanoparticles in the presence of low generational poly(ester-amine) dendrimers
Xu DM, Zhang KD, Zhu XL |
| 427 - 433 |
Ozonolysis of polybutadienes with different microstructure in solution
Anachkov MP, Rakovsky SK, Zaikov GE |
| 434 - 441 |
Mechanical, flow, and morphological properties of talc- and kaolin-filled polypropylene hybrid composites
Abu Bakar MB, Leong YW, Ariffin A, Ishak ZAM |
| 442 - 448 |
Catalytic effects of copper oxides on the curing and degradation reactions of cyanate ester resin
Hong SG, Yeh CS |
| 449 - 457 |
Surface characterization of polyethylene films modified by gaseous plasma
Deshmukh RR, Shetty AR |
| 458 - 463 |
Comparison of the growth process and electrochemical properties of polyaniline films prepared by pulse potentiostatic and potentiostatic method on titanium electrode
Zhou HH, Wen JB, Ning XH, Fu CP, Chen JH, Kuang YF |
| 464 - 469 |
Aggregation of lead phthalocyanine in blends with polycarbonate
Ranade A, Hiltner A, Baer E, Shirk JS, Lepkowicz RS |
| 470 - 478 |
Synthesis and study of metal ion sorption capacity of xanthan gum-g-2-acrylamido-2-methyl-1-propane sulphonic acid
Srivastava A, Behari K |
| 479 - 488 |
Investigations on the adhesion and interfacial properties of polyurethane foam/thermoplastic materials
Mahmood N, Busse K, Kressler J |
| 489 - 499 |
Structure and deformation of an elastomeric propylene-ethylene copolymer
Poon BC, Dias P, Ansems P, Chum SP, Hiltner A, Baer E |
| 500 - 503 |
Thermal degradation of epoxy resin reinforced with polypropylene fibers
Prabhu TN, Hemalatha YJ, Harish V, Prashantha K, Iyengar P |
| 504 - 513 |
Synthesis of starch-based plastic films by electron beam irradiation
El-Mohdy HLA |
| 514 - 527 |
Influence of support friability and concentration of alpha-olefins on gas-phase ethylene polymerization over polymer-supported metallocene/methylaluminoxane catalysts
Hammawa H, Wanke SE |
| 528 - 535 |
X-ray pole figures to assess orientation in PVC sheets
Gilbert M, Ross DH, Kim HC |
| 536 - 544 |
Synthesis and characterization of novel saponified guar-graft-poly(acrylonitrile)/silica nanocomposite materials
Singh V, Tiwari A, Pandey S, Singh SK, Sanghi R |
| 545 - 551 |
Thermal analysis of merino wool fibres without internal lipids
Marti M, Ramirez R, Manich AM, Coderch L, Parra JL |
| 552 - 559 |
HTPB-based polyurethaneurea membranes for recovery of aroma compounds from aqueous solution by pervaporation
Bai YX, Qian JW, Yin J, Zhai ZB, Yang Y |
| 560 - 567 |
Polyethylenes/PET blend compatibilization with maleic anhydride modified polyethylenes obtained by a UV preirradiation process
Martinez JG, Benavides R, Guerrer C |
| 568 - 575 |
Dynamic mechanical properties of Al2O3/poly(ether ether ketone) composites
Goyal RK, Tiwari AN, Mulik UP, Negi YS |
| 576 - 584 |
Relaxation time and conductivity of comb-like gel polymer electrolytes
Qi L, Dong SJ |
| 585 - 593 |
Using cycloolefin copolymers as pharmaceutical or cosmetic storage material. I. A study of adjuvant migration and of polymer ageing
Saunier J, Chodur CA, Larbes L, Mrad O, Yagoubi N |
| 594 - 600 |
Coloring effect of the organic hybrid of polyamide 6 and N,N'-ethylene-bis(tetrabromophthalimide)
Deng X, Dai WL, Zheng YL |
| 601 - 610 |
Quantitative assessment of relationship between pressure performances and material mechanical properties of medical graduated compression stockings
Liu R, Kwok YL, Li Y, Lao TT, Zhang X |
| 611 - 619 |
Graft copolymerization of styrene or methyl methacrylate onto syndiotactic polystyrene by ATRP technique
Abbasian M, Rahmani S, Mohammadi R, Entezami AA |
| 620 - 628 |
Processable and colorless fluorinated poly(ether imide)s based on an isopropylidene-containing bis(ether anhydride) and various aromatic bis(ether amine)s bearing trifluoromethyl groups
Huang SY, Yang CP, Hsiao SH |
| 629 - 633 |
Removal of Cu(II) by polypyrrole deposits on stainless steel mesh
Tian Y, Yang WS, Yang FL |
| 634 - 640 |
Evaluation of the crystallization kinetics and melting of polypropylene and metallocene-prepared polyethylene blends
Razavi-Nouri M, Hay JN |
| 641 - 647 |
Miniemulsion polymerization of a fluorinated acrylate copolymer: Kinetic studies and nanolatex morphology characterization
Zhang QH, Zhan XL, Chen FQ |
| 648 - 654 |
Blends of triazine-based hyperbranched polyether with LDPE and plasticized PVC
Borah J, Karak N |
| 655 - 665 |
Surface modification and physical properties of various UHMWPE-fiber-reinforced modified epoxy composites
Lin SP, Han JL, Yeh JT, Chang FC, Hsieh KH |
| 666 - 671 |
Morphology development in polypropylene/polystyrene blends during coalescence under shear
Li YY, Chen ZQ, Huang Y, Sheng J |
| 672 - 679 |
Adsorption of IgG on spacer-arm and L-arginine ligand attached poly(GMA/MMA/EGDMA) beads
Bayramoglu G, Senel AU, Arica MY |
| 680 - 687 |
A functional polysiloxane with benzophenone derivative ultraviolet absorbing side groups: Synthesis, morphology, and its performance on fabrics
An QF, Li LS, Lu DD, Huang LX |
