| 1 - 8 |
Polyurethane-cement-based and potential uses foams: Characterization and potential uses
Verdolotti L, Di Maio E, Lavorgna M, Iannace S, Nicolais L |
| 9 - 13 |
Effects of hyperbranched poly(amido-amine)s structures on synthesis of Ag particles
Sun YY, Liu YQ, Guizhe Z, Zhang QJ |
| 14 - 20 |
Reactive extrusion to synthesize intumescent flame retardant with a solid acid as catalyst and the flame retardancy of the products in polypropylene
Liu YA, Wang Q |
| 21 - 29 |
Insulation performance and microstructure in modified polyethylene by MPE
Wang X, Tu DM, Lei C, Du QG |
| 30 - 36 |
FTIR spectroscopic study of the effect of microwave heating on the transformation of cellulose I into cellulose II during mercerization
Moharram MA, Mahmoud OM |
| 37 - 44 |
Relaxation phenomena of methacrylate) monolayers stereoregular poly(methyl at the air/water interface
Lee YL, Hsu WP |
| 45 - 53 |
Synthesis of silver nanocrystals by a modified polyol method
Bregado-Gutierrez J, Saldivar-Garcia AJ, Lopez HF |
| 54 - 62 |
Effect of crystallization temperature on crystal modifications and crystallization kinetics of poly(L-lactide)
Pan P, Zhu B, Kai W, Dong T, Inoue Y |
| 63 - 70 |
Effect of solvent plasticization microcellular foaming process on polypropylene and foam characteristics
Kaewmesri W, Rachtanapun P, Pumchusak J |
| 71 - 81 |
Novel binder system for ultraviolet-curable coatings based on tobacco seed (Nicotiana rustica) oil derivatives as a renewable resource
Patel KI, Parmar RJ, Parmar JS |
| 82 - 93 |
Mechanical properties and porosity of polylactide for biomedical applications
Sawalha H, Schroen K, Boom R |
| 94 - 101 |
Real-time ultrasonic monitoring of the injection-molding process
He BB, Zhang XQ, Zhang Q, Fu QA |
| 102 - 108 |
Preparation of a multicolored reflective electrochromic display based on monodisperse polymeric microspheres with n-substituted viologen pendants
Ryu JH, Lee YH, Suh KD |
| 109 - 117 |
Colorless polyimide nanocomposite films: Thermomechanical properties, morphology, and optical transparency
Jin HS, Chang JH |
| 118 - 123 |
Polyacrylate/(Carboxymethylcellulose modified montmorillonite) superabsorbent nanocomposite: Preparation and water absorbency
Qiu HX, Yu JG |
| 124 - 131 |
Restraining the associations of anthracene fluorophore by chemically linking to poly(methyl methacrylate)
Su FK, Hong JL, Lin LL |
| 132 - 137 |
Surface characterization and properties of functionalized nonwoven
Wei QF, Yu LY, Hou DY, Huang FL |
| 138 - 146 |
Elastic effects on solubility in semicrystalline polymers
Serna LV, Becker JL, Galdamez JR, Danner RP, Duda JL |
| 147 - 152 |
Remote polymerization of coatings with the release of borane from its amine complex
Fedorov AV, Ermoshkin AA, Neckers DC |
| 153 - 158 |
Amphiphilic styrene-butadiene-styrene triblock copolymer grafted with polyoxyethylene
Xie HQ, Zhao W, Me D |
| 159 - 165 |
Lignins for phenol replacement in novolac-type phenolic formulations. II. Flexural and compressive mechanical properties
Tejado A, Kortaberria G, Pena C, Blanco M, Labidi J, Echeverria JM, Mondragon I |
| 166 - 173 |
Processability modifications of poly(3-hydroxybutyrate) by plasticizing, blending, and stabilizing
Wang LA, Zhu WF, Wang XJ, Chen XA, Chen GQ, Xu KT |
| 174 - 186 |
Effect of the molecular structure of ethene-propene and styrene-butadiene copolymers on their compatibilization efficiency in low-density polyethylene/polystyrene blends
Stary Z, Fortelny I, Krulis Z, Slouf M |
| 187 - 192 |
Evaluation of the light polymerization efficiency of copolymers used in dental formulations by differential scanning calorimetry
Rigoli IC, Riga AT, Cavalheiro CCS, Neumann MG, Cavalheiro TTG |
| 193 - 202 |
Poly(ether urethane) flexible cyanate ester resins: Synthesis, characterization, and performance in commercial epoxy,and polyurethane applications
Kumar TP, Sivasankar B |
| 203 - 209 |
Environmentally friendly mixed Tannin/Lignin wood resins
Lei H, Pizzi A, Du GB |
| 210 - 214 |
Utilization of bowstring hemp fiber as a filler in natural rubber compounds
Osabohien E, Egboh SHO |
| 215 - 222 |
Water-borne melamine-formaldehyde-cured epoxy-acrylate corrosion resistant coatings
Zafar S, Riaz U, Ahmad S |
| 223 - 227 |
A novel imidazole derivative curing agent for epoxy resin: Synthesis, characterization, and cure kinetic
Fang W, Jun X, Jing-Wen W, Shu-Qin L |
| 228 - 235 |
Curing and thermal Behavior of Heterocyclic derivatives of of DGEBA in the presence stannanes
Deep G, Narula AK |
| 236 - 245 |
Morphology copolymers development for single-site in rotational molding
Xu H, Bellehurneur CT |
| 246 - 252 |
Reactivity and efficiency of difunctional radical photoinitiators
Dietlin C, Lalevee J, Allonas X, Fouassier JP, Visconti M, Bassi GL, Nordni G |
| 253 - 261 |
Viscoelasticity of epoxy Resin/Silica hybrid material prepared via sol-gel process: Considered in terms of morphology
Araki W, Adachi T |
| 262 - 271 |
Polymeric Amines by chemical modifications of alternating aliphatic polyketones
Zhang YC, Broekhuis AA, Stuart MCA, Picchioni F |
| 272 - 279 |
Morphology and rheological Behaviors of poly(ethylene terephthalate) nanocomposites containing polyhedral oligomeric silsesquioxanes
Kim JK, Yoon KH, Bang DS, Park YB, Kim HU, Bang YH |
| 280 - 285 |
Preparation and properties of glucosamine and carboxymethylchitin from shrimp shell
Santhosh S, Mathew PT |
| 286 - 291 |
Synthesis of ethylene and norbornene copolymer with metallocene catalysts and characteristic analysis
Yao Z, Lv F, Liu SJ, Cao K |
| 292 - 299 |
Novel nanoporous membranes from regenerated bacterial cellulose
Phisalaphong M, Suwanmajo T, Sangtherapitiku P |
| 300 - 308 |
Effect of disinfection by microwave irradiation on the strength of intact and relined denture bases and the water sorption and solubility of denture base and reline materials
Seo RS, Vergani CE, Giampaolo ET, Pavarina AC, Reis JMDN, Machado AL |
| 309 - 318 |
Hierarchy crystallization structure of a polypropylene random copolymer injection-molded bar induced by a nucleating agent
Wang Y, Gao Y, Shi J |
| 319 - 323 |
Moisture sensitivity of polyester and acrylic polymer concretes with metallic monomer powders
Ahn N |
| 324 - 330 |
Plasma induced graft polymerization of acrylic acid onto polypropylene monofilament
Gupta B, Saxena S, Ray A |
| 331 - 338 |
Characteristics of waterborne Polyurethane/Poly(N-vinylpyrrolidone) composite films for wound-healing dressings
Yoo HJ, Kim HD |
| 339 - 346 |
Kinetic study of the decompositions involved in the thermal degradation of commercial azodicarbonamide
Reyes-Labarta JA, Marcilla A |
| 347 - 354 |
Synthesis of bisphenol a novolac epoxy resins for coating applications
Atta AM, Shaker NO, Nasser NE |
| 355 - 363 |
Moisture absorption by various Polyamides and their associated dimensional changes
Monson L, Braunwarth M, Extrand CW |
| 364 - 371 |
Copolymerization of N-(4-bromophenyl)-2-methacrylamide with n-butyl methacrylate: Synthesis, characterization and monomer reactivity ratios
Delibag A, Soykan C |
| 372 - 381 |
Processibility and mechanical properties of micronized polytetrafluoroethylene reinforced silicone rubber composites
Park ES |
| 382 - 390 |
Preparation and characterization of polyacrylamide cryogels produced from a high-molecular-weight precursor. II. The influence of the molecular weight of the polymeric precursor
Ivanov RV, Lozinsky VI, Noh SK, Lee YR, Han SS, Lyoo WS |
| 391 - 395 |
Preparation and characteristic of electric stimuli responsive hydrogel composed of polyvinyl Alcohol/Poly (Sodium maleate-co-sodium acrylate)
Gao Y, Xu SM, Wu RL, Wang JD, Wei J |
| 396 - 402 |
Annealina effect of perfluorosulfonated ionomer membranes on proton conductivity and methanol permeability
Luan YH, Zhang YM, Zhang H, Li L, Li H, Liu YG |
| 403 - 408 |
Water-dispersible conducting polyaniline/nano-SiO2 composites without any stabilizer
Li XW, Dai N, Wang GC, Song XM |
| 409 - 417 |
Soy protein-based nanocomposites reinforced by supramolecular nanoplatelets assembled from Pluronic polymers/beta-cyclodextrin pseudopolyrotaxanes
Huang J, Zhou ZY, Wei M, Chen Y, Chang PR |
| 418 - 422 |
Preparation and characterization of amphiphilic starch nanocrystals
Song SW, Wang C, Pan ZL, Wang XF |
| 423 - 430 |
Conjugated low-saturation soybean oil thermosets: Free-radical copolymerization with dicyclopentadiene and divinylbenzene
Valverde M, Andjelkovic D, Kundu PP, Larock RC |
| 431 - 437 |
Miscibility and melting behavior of poly(ethylene terephthalate)/poly(trimethylene terephthalate) blends
Liang H, Xie F, Chen B, Guo FQ, Jin Z, Luo FS |
| 438 - 443 |
Interfacial conversion for poly(para-phenylenevinylene) at a cholesteric liquid crystal surface
Goto H, Miyazawa T, Tomishige K, Kunimori K, Kiebooms RHL, Akiyama Y, Akagi K |
| 444 - 454 |
Influence of prolonging vulcanization on the structure and properties of hard rubber
Wang Y, Wang YQ, Tian M, Zhang LQ, Ma J |
| 455 - 462 |
Characterization of the viscoelastic and mechanical properties of tightly cross-linked polythiourethane networks
Droger N, Primel O, Halary JL |
| 463 - 475 |
Sorption and desorption parameters of water or ethanol in light-cured dental dimethacrylate resins
Sideridou ID, Karabela MM, Vouvoudi EC, Papanastasiou GE |
| 476 - 486 |
Evaluating cell wall structure and composition of developing cotton fibers using Fourier transform infrared spectroscopy and thermogravimetric analysis
Abidi N, Hequet E, Cabrales L, Gannaway J, Wilkins T, Wells LW |
| 487 - 496 |
Functional properties of thermoformed wheat gluten/montmorillonite materials with respect to formulation and processing conditions
Angellier-Coussy H, Torres-Giner S, Morel MH, Gontard N, Gastaldi E |
| 497 - 500 |
Rapid replication of nanostructures made with a polymer using simple injection molding
Huang CK |
| 501 - 508 |
Preparation of a heterogeneous hollow-fiber affinity membrane having a mercapto chelating resin and its recovery of Hg2+ cations
Wang B, Liu W, Huang L |
| 509 - 513 |
Lower critical solution temperature behavior of amphiphilic copolymers based on polvaspartamide derivatives
Bach QV, Moon JR, Lee DS, Kim JH |
| 514 - 521 |
Electroluminescence and photovoltaic properties of poly(p-phenylene vinylene) derivatives with dendritic pendants
Tan ZA, Tang RP, Zhou EJ, He YJ, Yang CH, Xi F, Li YF |
| 522 - 527 |
Evaluation of improvement of physical and mechanical properties of bamboo fibers due to alkali treatment
Das M, Chakraborty D |
| 528 - 540 |
Different photodegradation processes of PVC with different average degrees of polymerization
Shi W, Zhang J, Shi XM, Jiang GD |
| 541 - 553 |
Dynamics of blood proteins adsorption onto poly (2-hydroxyethyl methacrylate)-silica nanocomposites: Correlation with biocompatibility
Bajpai AK, Mishra DD |
| 554 - 561 |
Curing behavior study of polydimethylsiloxane-modified allylated novolac/4,4'-bismaleimidodiphenylmethane resin
Li WW, Liu F, Wei LH, Zhao T |
| 562 - 570 |
Surface modification of nano-sized silicon nitride with BA-MAA-AN tercopolymer
Xia R, Zhang YC, Zhu QR, Qian JS, Dong QN, Li FS |
| 571 - 576 |
Ethylenediamino bridged bis(beta-cyclodextrin)/poly(DL-lactic-co-glycolic acid) nanoparticles prepared by modified double emulsion method: Effect of polyvinyl alcohol on nanoparticle properties
Gao H, Wang YN, Fan YG, Ma JB |
| 577 - 582 |
Influence of water on the nanoindentation creep response of Nylon 6
Bell GA, Bielinski DM, Beake BD |
| 583 - 592 |
Crystallization of poly(butylene terephthalate)/poly(ethylene octene) blends: Nonisothermal crystallization
Huang JW, Wen YL, Kang CC, Yeh MY, Wen SB |
| 593 - 598 |
Synthesis and characterization of soluble copolyimides containing chalcone and phosphine oxide moieties in the main chain
Wang W, Wu QR, Ding LQ, Yang ZL, Zhang AQ |
| 599 - 609 |
Crystallization and melting Behavior of the crystalline soft segment in a shape-memory polyurethane ionomer
Zhu Y, Hu JL, Choi KF, Yeung KW, Meng QH, Chen SJ |
| 610 - 617 |
Effects of coupling agents on the natural aging behavior and oxidation profile of high-density polyethylene/sericite composites
Yang R, Yu J, Liu Y, Wang KH |
| 618 - 623 |
Formation of honeycomb films based on a soluble polyimide synthesized from 2,2'-bis[4-(3,4-dicarboxyphenoxy)phenyllhexafluoropropane dianhydride and 3,3'-dimethyl-4,4'-diaminodiphenylmethane
Han XT, Tian Y, Wang LH, Xiao CF |
| 624 - 628 |
Synthesis of a novel polymerizable surfactant and its application in the emulsion polymerization of vinyl acetate, butyl acrylate, veova 10, and hexafluorobutyl methacrylate
Zhu MY, Qiao WH, Liu HZ, Sun YL |
| 629 - 635 |
Effect of colophony emulsion on the adhesive properties of vinyl acetate/n-butyl acrylate copolymeric latex
Zhu AP, Chen R, Yuan LH |
| 636 - 641 |
Comparison of the structures and properties of lyocell fibers from high hemicellulose pulp and high alpha-cellulose pulp
Zhang HR, Zhang HH, Tong MW, Shao HL, Hu XC |
| 642 - 649 |
Mechanical and thermal properties of blends of low-density polyethylene and ethylene vinyl acetate crosslinked by both dicumyl peroxide and ionizing radiation for wire and cable applications
Basfar AA, Mosnacek J, Shukri TM, Bahattab MA, Noireaux P, Courdreuse A |
| 650 - 657 |
Intercalation process and rubber-filler interactions of polybutadiene rubber/organoclay nanocomposites
Wan CY, Dong W, Zhang YX, Zhang Y |
| 658 - 666 |
Effect of photosensitivity in acrylic photoreactive electrode pastes on line width uniformity for large-sized plasma display panels
Kim SH, Kwon Y, Han YS, Hur Y, Kwak G, Woo CM, Hur BK, Park LS |
| 667 - 673 |
Tensile Behavior of glass-fiber-filled polyacetal: Influence of the functional groups of polymer matrices
Kawaguchi K, Masuda E, Tajima Y |
| 674 - 682 |
Preparation and adsoription behavior of a cellulose-based, mixed-mode adsorbent with a benzylamine ligand for expanded bed applications
Gao D, Yao SJ, Lin DQ |
| 683 - 687 |
Synthesis and properties of novel organosoluble aromatic poly(ether ketone)s containing pendant methyl groups and sulfone linkages
Sheng SR, Luo QY, Huo Y, Luo Z, Liu XL, Song CS |
