| 1 - 7 |
Influence of dehydration rate on the vitrification of corn protein
Sabino MA, Pauchard L, Allain C, Mangavel C, Zeng M, Lourdin D |
| 8 - 17 |
Formation of new thermosets by the reaction of cyanates with thiophenols
Bauer M, Bauer J |
| 18 - 22 |
Morphology and photophysical properties of a thermally responsive fluorescent material based on a rod-coil tri-block copolymer
Ma Z, Qiang LL, Zheng Z, Wang YY, Zhang ZJ, Huang W |
| 23 - 29 |
Visualization and quantification of the mechanical deformation induced by an electrical field in poly(ethylene naphthalene 2,6-dicarboxylate) (PEN) films
Zegnini B, Lahoud N, Boudou L, Martinez-Vega J |
| 30 - 38 |
Use of methacrylic acid grafted poly(ethylene terephthalate) fibers for the removal of basic dyes from aqueous solutions
Arslan M, Yigitoglu M |
| 39 - 48 |
Surface modification of medical poly(vinyl chloride) with O- water
Zhao E, Wang L, Yan LF, Torimoto YF, Li QX |
| 49 - 54 |
Effects of the functionality of polyol in rigid polyurethane foams
Lim H, Kim SH, Kim BK |
| 55 - 60 |
Morphological aspects of rubber fracture and wear
Bielinski DM, Dobrowolski O, Przybytniak G |
| 61 - 65 |
Influence of polymerization conditions on the viscosity and yield of poly(phenylene sulfide ether)
Gu AQ, Yu ZL, Li YB |
| 66 - 75 |
Hydroxyalkylation of oxamic acid with propylene carbonate: Synthesis, composition, and properties of products
Zarzyka-Niemiec I |
| 76 - 82 |
Back-calculation of the die swell phenomenon of rubber compounds by means of torsional rheometry
Muellner HW, Ernst G, Eberhardsteiner J |
| 83 - 90 |
New fire-protective intumescent coatings for wood
Hassan MA, Kozlowski R, Obidzinski B |
| 91 - 96 |
Structural, thermal, and tribological properties of intercalated polyoxymethylene/molybdenum disulfide nanocomposites
Wang J, Hu KH, Xu YF, Hu XG |
| 97 - 108 |
Observations of physical aging in a polycarbonate and acrylonitrile-butadiene-styrene blend
Tang JKY, Lee-Sullivan P |
| 109 - 116 |
Oxidative polymerization of pyrrole photocatalyzed by TiO2 nanoparticles and interactions in the composites
Weng Z, Ni XY |
| 117 - 123 |
Release behavior of freeze-dried alginate beads containing poly(N-isopropylacrylamide) copolymers
Choi JH, Lee HY, Kim JC |
| 124 - 133 |
Preparation and characterization of lithium-8-hydroxyquinolate-containing quaternary ammonium copolymers and their electrostatic layer-by-layer self-assembly
Yu DB, Zhang CZ, Wang X, Jiang CX, Xiong T, Meng WQ, Liu C, Chen D, Zhong AY |
| 134 - 139 |
Mechanical and viscoelastic properties of novel silk fibroin fiber/poly(epsilon-caprolactone) biocomposites
Li W, Qiao XY, Sun K, Chen XD |
| 140 - 146 |
Poly(ethylene terephthalate)/attapulgite nanocomposites: Preparation, structure, and properties
Yao XY, Tian XY, Zhang X, Zheng K, Zheng J, Zhang HB, Chen L, Li Y, Cui P |
| 147 - 155 |
Hybridization of aqueous PU/epoxy resin via a dual self-curing process
Chen WJ, Wang SC, Chen PC, Chen TW, Chen KN |
| 156 - 162 |
Mechanism involved in the dyeing of wool with an oil-in-water microemulsion system
Paul R, Solans C, Erra P |
| 163 - 169 |
Surface functionalization of poly(lactic acid) film by UV-photografting of N-vinylpyrrolidone
Gutierrez-Villarreal MH, Ulloa-Hinojosa MG, Gaona-Lozano JG |
| 170 - 176 |
Modification of the mechanical and thermal properties of PVC by semi IPN formation with poly(butyl acrylate)
Chakrabarti R, Chakraborty D |
| 177 - 182 |
Study on phase separation of PET/PEN blends by dynamic rheology
Wagner MH, Wu W, Liu Y, Qian Q, Zhang Y, Mielke W |
| 183 - 195 |
Influence of morphology on the dynamic mechanical properties of hydrogenated acrylonitrile butadiene elastomer/coagent nanodispersions
Likozar B, Krajnc M |
| 196 - 202 |
Melt mixing of carbon fibers and carbon nanotubes incorporated polyurethanes
Abdullah SA, Iqbal A, Frormann L |
| 203 - 209 |
Dehydration of benzene through fluorine containing aromatic polyamide membrane by pervaporation
Gutch PK, Pandey LK, Saxena C |
| 210 - 227 |
Synthesis of charged ultrafiltration poly(styrene-co-divinyl benzene) composite membrane
Sachdeva S, Kumar A |
| 228 - 236 |
Tin-coupled star-shaped block copolymer of styrene and butadiene (I) synthesis and characterization
Feng HD, Zhang XY, Zhao SH |
| 237 - 243 |
Influence of surface modification on the dispersion of nanoscale alpha-Al2O3 particles in a thermoplastic polyurethane matrix
Chen CH, Mao CF, Tsai MS, Yen FS, Lin JM, Tseng CH, Chen HY |
| 244 - 252 |
Kinetic study of atom transfer radical polymerization of methyl methacrylate in ionic liquids
Zhang HY, Zhang YM, Liu WW, Wang HP |
| 253 - 261 |
Biodegradable polymeric micro-nanofibers by electrospinning of polyester/polyether block copolymers
Detta N, El-Fattah AA, Chiellini E, Walkenstrom P, Gatenholm P |
| 262 - 269 |
Interface and mechanical properties of peroxide cured silicate nanofiber/rubber composites
Tian M, Cheng LJ, Zhang LQ |
| 270 - 275 |
Ethylene polymerization catalyzed by diamide complexes of Ti(IV) and Zr(IV)
Carone CLP, Fim FC, Bisatto R, Jahno VD, Lemos C, Basso NRS, Einloft S, Galland GB |
| 276 - 282 |
Influence of organoclay and preparation technique on the morphology of polyamide6/polystyrene/organoclay nanocomposites
Yang JT, Sun L, Xiang SF, He JL, Gu LC, Zhong MQ |
| 283 - 296 |
2,2-bis[4-(3,4-dicarboxyphenoxy) phenyl]propane dianhydride (BPADA)-based polyimide membranes for pervaporation dehydration of isopropanol: Characterization and comparison with 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA)-based polyimide membranes
Xiao SD, Feng XS, Huang RYM |
| 297 - 303 |
Compatibilization of poly(vinyl chloride) and polystyrene blends with poly(styrene-co-n-methylolacrylamide)
Escobar D, Mendizabal E, Gonzalez-Nunez R |
| 304 - 312 |
Study of epoxy toughened by in situ formed rubber nanoparticles
Ma J, Mo MS, Du XS, Dai SR, Luck I |
| 313 - 320 |
Preparation and pH-sensitivity of polyacrylonitrile (PAN) based porous hollow gel fibers
Shen XY, Ji YL, Wang J |
| 321 - 330 |
Preparation, characterization, and cellular interactions of collagen-immobilized PDMS surfaces
Keranov I, Vladkova T, Minchev M, Kostadinova A, Altankov G |
| 331 - 340 |
Effects of some solvents on the thermal and free-volume properties of poly(4-vinylpyridine) complexes
Mazroua A, Gomaa E |
| 341 - 347 |
Formation of a bicontinuous structure membrane of polyvinylidene fluoride in diphenyl ketone diluent via thermally induced phase separation
Yang J, Li DW, Lin YK, Wang XL, Tian F, Wang Z |
| 348 - 355 |
Degradation and life prediction of a natural rubber engine mount compound
Ngolemasango FE, Bennett M, Clarke J |
| 356 - 367 |
Synthesis and characterization of electrically conducting copolymers based on benzene and biphenyl
Simitzis J, Triantou D, Soulis S |
| 368 - 375 |
Enhancement of PVC/ENR blend properties by poly(methyl acrylate) grafted oil palm empty fruit bunch fiber
Raju G, Ratnam CT, Ibrahim NA, Rahman MZA, Yunus WMZW |
| 376 - 386 |
Effects of a silane coupling agent on the exfoliation of organoclay layers in polyurethane/organoclay nanocomposite foams?
Han MS, Kim YH, Han SJ, Choi SJ, Kim SB, Kim WN |
| 387 - 391 |
Preparation of poly(styrene-block-acrylamide)/organic montmorillonite nanocomposites via reversible addition-fragmentation chain transfer
Qu YZ, Su YN, Sun JS, Wang KC |
| 392 - 400 |
Carboxymethyl tamarind: Synthesis, characterization and its application as novel drug-delivery agent
Pal S, Sen G, Mishra S, Dey RK, Jha U |
| 401 - 407 |
Effects of a Hindered Amine Stabilizer (HAS) on radiolytic and thermal stability of poly(methyl methacrylate)
Aquino KAS, Araujo ES |
| 408 - 412 |
Preparation and cytocompatibility of chitosan-modified polylactide
Xiao YM, Li DX, Chen XN, Lu J, Fan HS, Zhang XD |
| 413 - 423 |
Effect of neutron irradiation on the structural, mechanical, and thermal properties of jute fiber
Sinha E, Rout SK |
| 424 - 432 |
Properties of solid solutions of poly(ethylene oxide)/epoxidized natural rubber blends and LiClO4
Chan CH, Kammer HW |
| 433 - 443 |
Influence of fiber modification on interfacial adhesion and mechanical properties of pineapple leaf fiber-epoxy composites
Lopattananon N, Payae Y, Seadan M |
| 444 - 452 |
Miscibility, thermal, and mechanical studies of hydroxypropyl methylcellulose/Pullulan blends
Prasad P, Guru GS, Shivakumar HR, Rai KS |
| 453 - 458 |
Effects of styrene oligomers and polymers on the suspension polymerization behavior and properties of expandable polystyrene
Schellenberg J |
| 459 - 467 |
Biodegradable plastics from animal protein coproducts: Feathermeal
Sharma S, Hodges JN, Luzinov I |
| 468 - 474 |
Free radical polymerizations of some vinyl monomers in carbon dioxide fluid
Wang Z, Yang YJ, Dong QZ, Hu CP |
| 475 - 480 |
Preparation and characterization of silanized silica gel-supported poly(acrylic acid) network polymer and study of its analytical application as selective extractor for lead ion
Chowdhury P, Pandit SK, Mandal B |
| 481 - 493 |
Synthesis and characterization of poly(N-Vinyl-2-pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin
Isiklan N, Inal M, Yigitoglu M |
| 494 - 500 |
Preparation of branched polyacrylonitrile through self-condensing vinyl copolymerization
Liu QC, Xiong M, Cao M, Chen YM |
| 501 - 506 |
Zeolite catalyzed glycolysis of poly(ethylene terephthalate) bottle waste
Shukla SR, Palekar V, Pingale N |
| 507 - 516 |
Effect of the structure of silane-coupling agent on dynamic mechanical properties of dental resin-nanocomposites
Sideridou ID, Karabela MM |
| 517 - 522 |
Synthesis, cure kinetics, and thermal properties of the bis(3-allyl-2-cyanatophenyl)sulphoxide/BMI blends
Anuradha G, Sarojadevi M, Sundararajan PR |
| 523 - 530 |
Crystallization, orientation morphology, and mechanical properties of biaxially oriented starch/polyvinyl alcohol films
Wang J, Lu Y, Yuan HL, Dou P |
| 531 - 538 |
Pilling in man-made cellulosic fabrics, part 1: Assessment of pilling formation methods
Bui HM, Ehrhardt A, Bechtold T |
| 539 - 549 |
Synthesis and characterization of novel polyphenol species derived from bis(4-aminophenyl) ether: Substituent effects on thermal behavior, electrical conductivity, solubility, and optical band gap
Kaya I, Yidirim M |
| 550 - 557 |
Morphology and properties of silane-modified montmorillonite clays and clay/PBT composites
Wan CY, Bao XJ, Zhao F, Kandasubramanian B, Duggan MP |
| 558 - 563 |
Study on radiation-induced grafting of hydrophilic monomers onto chitosan
Dergunov SA, Nam IK, Maimakov TP, Nurkeeva ZS, Shaikhutdinv EM, Mun GA |
| 564 - 568 |
Synthesis and characterization of water-soluble oligosalicylaldehyde-sulfanilic acid and its Cu(II), Co(II), Pb(II) complexes
Turac E, Surme Y, Sahmetlioglu E, Varol R, Narin I, Toppare L |
| 569 - 577 |
Preparation of fine Ni particles and their shielding effectiveness for electromagnetic interference
Gong CH, Duan YP, Tian JT, Wu ZS, Zhang ZJ |
| 578 - 583 |
Interfacial modification of high impact polystyrene magnesium hydroxide composites effects on flame retardancy properties
Chang SQ, Xie TX, Yang GS |
| 584 - 593 |
In situ development of Zn/Cd-Incorporated poly(esteramide-urethane) from sustainable resource
Zafar F, Ashraf SM, Ahmad S |
| 594 - 602 |
LiClO4-doped cellulose acetate as biodegradable polymer electrolyte for supercapacitors
Selvakumar M, Bhat DK |
| 603 - 607 |
Electrospun self-assembled nanofiber yarns
Mondal A, Borah R, Mukherjee A, Basu S, Jassal M, Agrawal AK |
| 608 - 615 |
Characterization of chitosan/citrate and chitosan/acetate films and applications for wound healing
Tanigawa J, Miyoshi N, Sakurai K |
| 616 - 623 |
Polypropylene/clay nanocomposites prepared by in situ grafting-melt intercalation with a novel cointercalating monomer
Song PA, Tong LF, Fang ZP |
| 624 - 631 |
Influence of microstructure and morphology on stress-strain behavior of commercial high density polyethylene
Zahedi M, Ahmadi M, Nekoomanesh M |
| 632 - 640 |
Preparation and characterization of composites of polyethylene with polypyrrole-coated wollastonite
Ong CK, Ray S, Cooney RP, Edmonds NR, Easteal AJ |
