| 1 - 8 |
Preparation, Crystallization Behavior, and Melting Characteristics of beta-Nucleated Isotactic Polypropylene Blends with Polyamide 6
Yang ZG, Zhang ZS, Tao YJ, Mai KC |
| 9 - 18 |
Preparation and Permeation Characterization of beta-Zeolite-Incorporated Composite Membranes
Huang Z, Su JF, Su XQ, Guo YH, Teng LJ, Yang CM |
| 19 - 27 |
Functionalization via Glycerol Transesterification of Polymerized Soybean Oil
Lubguban AA, Tu YC, Lozada ZR, Hsieh FH, Suppes GJ |
| 28 - 35 |
Effect of Electron-Beam Irradiation on Ethylene-Methyl Acrylate Copolymer
Mongal N, Chakraborty D, Bhattacharyya R, Chaki TK, Bhattacharya P |
| 36 - 43 |
Flame-Retardant Properties of Magnesium Hydroxystannate and Strontium Hydroxystannate Coated Calcium Carbonate on Soft Poly(vinyl chloride)
Jiao YH, Xu JZ |
| 44 - 51 |
Wood Preservation by a Mixed Anhydride Treatment: A C-13-NMR Investigation of Simple Models of Polymeric Wood Constituents
Lyon F, Thevenon MF, Pizzi A, Tondi G, Despres A, Gril J, Rigolet S |
| 52 - 63 |
Effects of the Nature and Combinations of Solvents in the Intercalation of Clay on the Properties of Polymer with Block Copolymers Nanocomposites
Sen S, Nugay N, Nugay T |
| 64 - 71 |
N,N-diethyl Dithiocarbamato Group Induced Photografting of Methyl Methacrylate onto Polyurethane
Bhuyan PK, Kakati DK |
| 72 - 81 |
Dynamic Mechanical Analysis of Ethylene-Propylene-Diene Monomer Rubber and Styrene-Butadiene Rubber Blends
Nair TM, Kumaran MG, Unnikrishnan G, Piiai VB |
| 82 - 88 |
A Study on the Flame-Retardance of Poly(vinyl chloride) Incorporated with Metal Hydroxystannates
Zhang B, Jiao YH, Xu JZ |
| 89 - 98 |
Double-Miniemulsion Preparation of Fe3O4/Poly(methyl methacrylate) Magnetic Latex
Hong RY, Feng B, Cai X, Liu G, Li HZ, Ding J, Zheng Y, Wei DG |
| 99 - 106 |
Influence of Surface Photocrosslinking on Properties of Thermoplastic Starch Sheets
Zhou J, Ma YH, Zhang J, Tong J |
| 107 - 113 |
The Effect of High Pressure Processing on the Morphology of Polyethylene Films Tested by Differential Scanning Calorimetry and X-ray Diffraction and Its Influence on the Permeability of the Polymer
Yoo S, Lee J, Holloman C, Pascall MA |
| 114 - 122 |
Fast Responsive Poly(acrylic acid-co-N-isopropyl acrylamide) Hydrogels Based on New Crosslinker
Atta AM, Abdel-Bary EM, Rezk K, Abdel-Azim A |
| 123 - 128 |
Fast Responsive and Strong Swelling Hydrogels Based on N-Isopropylacrylamide with Sodium Acrylate
Huang H, Zhang D, Mao ZP, Yu WD, Yan HJ |
| 129 - 134 |
The Effect of the Mixtures of Photoinitiators in Polymerization Efficiencies
Neumann MG, Schmitt CC, Horn MA |
| 135 - 141 |
Synthesis, Characterization, and Properties of Polymeric Flocculant with the Function of Trapping Heavy Metal Ions
Hao XK, Chang Q, Li XH |
| 142 - 156 |
Processing and Properties of Carbon Nanotube/Poly(methyl methacrylate) Composite Films
Liu J, Rasheed A, Minus ML, Kumar S |
| 157 - 162 |
In Situ Determination of Aniline Polymerization Kinetics Through Near-Infrared Spectroscopy
de Souza FG, Anzai TK, Rodrigues MVA, Melo PA, Nele M, Pinto JC |
| 163 - 172 |
Indentation of an Oriented Transparent Polyamide
Yang Y, Thompson G, Song J, Hiltner A, Baer E |
| 173 - 180 |
Miniemulsion Copolymerizations of Styrene and Methyl Methacrylate in the Presence of Reactive Costabilizer
Chern CS, Lim H, Cala NA |
| 181 - 187 |
Preparation of Acrylic Copolymer Latex Modified by Fluorine, Silicon, and Epoxy Resin
Lu DP, Xiong PT, Chen PZ, Huang HZ, Shen L, Guan R |
| 188 - 199 |
Stress-Induced Changes in Microstructure of a Low-Crystalline Polypropylene Investigated at Uniaxial Stretching
Boger A, Imhof C, Heise B, Marti O, Troll C, Rieger B, Hild S |
| 200 - 207 |
Characterization of Hyperbranched Polyol Polyesters Based on 2,2-Bis (methylol Propionic Acid) and Pentaerythritol
Murillo EA, Vallejo PP, Sierra L, Lopez BL |
| 208 - 217 |
Improving Blood Compatibility of Natural Rubber by UV-Induced Graft Polymerization of Hydrophilic Monomers
Hoven VP, Chombanpaew K, Iwasaki Y, Tasakorn P |
| 218 - 225 |
Effect of Organic Peroxides on the Morphology and Properties of EVA/Cloisite 15A Nanocomposites
Mishra SB, Luyt AS |
| 226 - 234 |
Comparison of the Thermal Degradation of Natural, Alkali-Treated and Silane-Treated Hemp Fibers Under Air and an Inert Atmosphere
Rachini A, Le Troedec M, Peyratout C, Smith A |
| 235 - 243 |
Effect of Wettability and Silicone Surface Modification on the Self-Cleaning Functionalization of Wool
Tung WS, Daoud WA |
| 244 - 253 |
Soluble New Optically Active Polyamides Derived from 5-(4-Methyl-2-phthalimidylpentanoylamino)isophthalic acid and Different Diisocyanates Under Microwave Irradiation in Molten Ionic Liquid
Mallakpour S, Dinari M |
| 254 - 260 |
Crystallization, Mechanical, and Rheological Behavior of Polyvinylidene Fluoride/Carbon Nanofiber Composites
Vidhate S, Shaito A, Chung J, D'Souza NA |
| 261 - 268 |
Carboxylmethylcellulose/Bentonite Composite Gels: Water Sorption Behavior and Controlled Release of Herbicide
Li JF, Lu JH, Li YM |
| 269 - 274 |
Thermochromic Core-Shell Nanofibers Fabricated by Melt Coaxial Electrospinning
Li FY, Zhao Y, Wang S, Han D, Jiang L, Song YL |
| 275 - 282 |
Solid-State Graft Polymerization of Styrene in Spherical Polypropylene Granules in the Presence of TEMPO
Sun FL, Fu ZS, Deng QT, Fan ZQ |
| 283 - 289 |
Bonding Properties Between Nitrile-Butadiene Rubber and Aluminum Alloy Treated by Anodizing Methods
Zhang XF, Fan L, Zhao XH, Zhang LQ, Liu L, Zuo Y |
| 290 - 298 |
B-Staged Epoxy/Single-Walled Carbon Nanotube Nanocomposite Thin Films for Composite Reinforcement
Warren GL, Sun LY, Hadjiev VG, Davis D, Lagoudas D, Sue HJ |
| 299 - 308 |
Characterization of Flexible Polyurethane Foams based on Soybean-Based Polyols
Das S, Dave M, Wilkes GL |
| 309 - 314 |
Preparation and Characterization of Petroleum-Pitch-Based Carbon Aerogels
Zeng XH, Wu DC, Fu RW |
| 315 - 319 |
Synthesis of a Photoimmobilizable Histidine Polymer for Surface Modification
Sakuragi M, Tsuzuki S, Hasuda H, Wada A, Matoba K, Kubo I, Ito Y |
| 320 - 334 |
Preparation of Polypropylene-Clay Nanocomposites by the Co-Intercalation of Modified Polypropylene and Short-Chain Amide Molecules
Ratnayake UN, Haworth B, Hourston DJ |
| 335 - 344 |
Synthesis and Characterization of Graft Copolymers of Syndiotactic Polystyrene with Polybutadiene and 4-Methylstyrene
Srinate N, Thongyai S, Praserthdam P |
| 345 - 352 |
Mechanical Properties of Poly(epsilon-caprolactone) and Poly(lactic acid) Blends
Simoes CL, Viana JC, Cunha AM |
| 353 - 358 |
Swelling Behavior of Poly(acrylamide)/Clay Nanocomposite Hydrogels in Acrylamide Aqueous Solution
Jiang YM, Zhu MF, Li BA, Liu Y, Qin ZY, Chen L, Chen YM |
| 359 - 365 |
Influence of the Surface Modification of a Filler on the Properties of High-Impact Polystyrene Composites
Cui WG, Gao YL, Wei Q, Mu W |
| 366 - 371 |
Ultrasonic and Mechanical Measurements for the Detection of Crosslink Density of SBR and NBR Based on Various Curing Systems
Lawandy SN, Halim SF, Afifi HA |
| 372 - 380 |
Spoliation of Fluoroperm Rigid Gas Permeable Contact Lens by Sodium Chloride: A Positron Annihilation Study
Urs MVD, Ranganathaiah C |
| 381 - 389 |
Photochemistry of Low-Density Polyethylene-Montmorillonite Composites
Ghafor WA, Halley PJ, Hill DJT, Martin DJ, Rasoul F, Whittaker AK |
| 390 - 401 |
Poly(ethylene glycol)-Based Hydrogels as Cartilage Substitutes: Synthesis and Mechanical Characteristics
Rakovsky A, Marbach D, Lotan N, Lanir Y |
| 402 - 409 |
Preparation of Polyelectrolyte Complex Membranes Based on Sodium Cellulose Sulfate and Poly(dimethyldiallylammonium chloride) and Its Permeability Properties
Li MM, Yao SJ |
| 410 - 415 |
Emulsifier-Free Emulsion Polymerization of Acrylonitrile in the Presence of Poly(methyl methacrylate) Seed Particles: Influence of the Addition Mode on the Surface Morphology
Yang GZ, Liu Y, Jia RP, Xu RS, Wang X, Ling LC, Yang JH |
| 416 - 424 |
Controlled Delivery of Diclofenac Sodium from Calcium Alginate Beads Loaded with a Drug-Resin Complex
Saxena S, Bajpai SK |
| 425 - 433 |
Electrical Conductivity of Carbon-Filled Polypropylene-Based Resins
King JA, Johnson BA, Via MD, Ciarkowski CJ |
| 434 - 438 |
Synthesis and Characterization of Poly(aryl ether ketone) Oligomers Terminated with Metallophthalocyanine to be Used for Oxidative Decomposition of TCP
Zhang YH, Guo MM, Guan SW, Zhang Y, Jiang ZH |
| 439 - 446 |
Synthesis and Water Absorbency of Polyampholytic Hydrogels with Antibacterial Activity
Li XH, Dong QZ, He PX |
| 447 - 453 |
Effects of Alkalization and Fiber Loading on the Mechanical Properties and Morphology of Bamboo Fiber Composites. II. Resol Matrix
Das M, Chakraborty D |
| 454 - 460 |
LnNa(8)[OC(CH3)(3)](10)(OH) Alkoxide Clusters: Highly Active Single-Component Catalysts for the Homopolymerization and Copolymerization of epsilon-Caprolactone and Trimethylene Carbonate
Sheng HT, Li JM, Zhang Y, Yao YM, Shen Q |
| 461 - 472 |
Polyimides Based on Aromatic Diisocyanates Containing Pendent Flexible Alkoxy Chains and Aromatic Dianhydrides: Synthesis, Characterization, and Liquid-Crystal Alignment Properties
Sarkar A, Halhalli MR, Kulkarni AD, Wadgaonkar PP |
| 473 - 478 |
Synthesis and Characterization of Poly(carbonate urethane) Networks with Shape-Memory Properties
Feng YK, Xue Y, Guo JT, Cheng L, Jiao LC, Zhang Y, Yue JL |
| 479 - 488 |
Sisal Chemo-Thermomechanical Pulp Paper with a Strongly Hydrophobic Surface Coating Produced by a Pentafluorophenyldimethylsilane Cold Plasma
Navarro F, Davalos F, Gonzalez-Cruz R, Lopez-Dellamary F, Manriquez R, Turrado J, Ramos J |
| 489 - 495 |
The Effect of Alkalization and Fiber Loading on the Mechanical Properties of Bamboo Fiber Composites, Part 1: - Polyester Resin Matrix
Das M, Chakraborty D |
| 496 - 504 |
Synthesis and Polymerization of Novel Epoxy Compounds Having an Adamantane Ring and Evaluation of their Heat Resistance and Transparency
Maehara T, Takenaka J, Tanaka K, Yamaguchi M, Yamamoto H, Ohshita J |
| 505 - 512 |
Development of Redox-Mediated Oxysilane Sol-Gel Biosensors on Carbon-Film Electrode Substrates
Pauliukaite R, Gouveia-Caridade C, Liess HD, Brett CMA |
| 513 - 523 |
New Polymer Syntheses, Part 43: Novel Polyamides-Based Diarylidenecyclopentanone: Synthesis, Characterization, and Corrosion Inhibition Behavior
Aly KI, Wahdan MH, Hussein MA |
| 524 - 531 |
Thermal Degradation Behavior of Styrene-Butadiene-Styrene Tri-Block Copolymer/Multiwalled Carbon Nanotubes Composites
Lu L, Yu HY, Wang SF, Zhang Y |
| 532 - 540 |
Production of Highly Crosslinked Microspheres by the Precipitation Polymerization of 2-(Diethylamino)ethyl Methacrylate with Two or Three Functional Crosslinkers
Tunc Y, Ulubayram K |
| 541 - 549 |
Characterization of Associating Hydrogels of Poly(vinyl alcohol) and Poly(vinyl pyrrolidone)
Liu X, Fussell G, Marcolongo M, Lowman AM |
| 550 - 556 |
Preparation and Characterization of Composite Membranes of Polysulfone and Microcrystalline Cellulose
Zhang LP, Chen GW, Tang HW, Cheng QZ, Wang SQ |
| 557 - 562 |
Tetrahydrosalen-Stabilized, Chloride-Containing Rare-Earth Complexes: Facile Initiator Precursors for the Preparation of Hydroxytelechelic Poly(epsilon-caprolactone)s
Wu GM, Sun WL, Shen ZQ |
| 563 - 571 |
Characterization and Evaluation of Supported rac-Dimethylsilylenebis(indenyl)zirconium Dichloride on Ethylene Polymerization
Franceschini FC, Tavares TTD, Bianchini D, Alves MDM, Ferreira ML, dos Santos JHZ |
