| 1 - 6 |
Studies on the Effect of Anions of Various Lithium Salts in PEMA Gel Polymer Electrolytes
Subadevi R, Sivakumar M, Rajendran S, Wu HC, Wu NL |
| 7 - 14 |
Hybrid Thermosets from Polyisocyanate/Water Glass/Emulsifier Systems: Effects of Melamine-Formaldehyde Resin
Castella N, Grishchuk S, Karger-Kocsis J, Schehl M |
| 15 - 22 |
Evaluation of the Corrosion Barrier Properties of Nano-Reinforced Vinyl Chloride/Vinyl Acetate Coatings
Calhoun M, Ludwick A, Mahmoud M, Aglan H |
| 23 - 30 |
Enhancing the Drawability of a Polyester by Copolymerization with a Second Type of Crystallizable Block
Gaymans RJ, van Swaaij AW |
| 31 - 37 |
Functionalization of multi-Walled Carbon Nanotubes with Poly(epsilon-caprolactone) Using Click Chemistry
Rana S, Yoo HJ, Cho JW, Chun BC, Park JS |
| 38 - 46 |
Effect of Different Curing Systems on Heat Shrinkability and Mechanical Properties of Ethylene Vinyl Acetate/Epoxidized Natural Rubber Blends
Tanrattanakul V, Kaewprakob T |
| 47 - 52 |
Synthesis and Thermal Property of Boron-Silicon-Acetylene Hybrid Polymer
Cheng R, Zhou QA, Ni LZ, Chen Y, Wang JA |
| 53 - 65 |
Dynamics of Air Drawing in the Melt Blowing of Nonwovens from Isotactic Polypropylene by Computer Modeling
Jarecki L, Ziabicki A, Lewandowski Z, Blim A |
| 66 - 72 |
Surface Photografting: New Application for Flame Retardant Finishing of Polyamide6.6 (PA6.6) Fabric
Liu W, Zhang S, Yu LH, Chen XS, Li LY, Feng QL, Zhu XJ |
| 73 - 83 |
Study on Effect of Filler Loading on the Flow and Swelling Behaviors of Polypropylene-Kaolin Composites Using Single-Screw Extruder
Rahim NAA, Ariff ZM, Ariffin A, Jikan SS |
| 84 - 92 |
Synthesis and Characterization of Fluorinated Polyacrylate Graft Copolymers Capable as Water and Oil Repellent Finishing Agents
Tang WY, Huang YG, Qing FL |
| 93 - 101 |
Polystyrene/Vinyl Ester Resin/Styrene Thermoplastic Elastomer Composites: Miscibility, Morphology, and Mechanical Properties
Gu J, Lu JM, Huang XC, Wang XL, Zheng Z |
| 102 - 110 |
Melt Grafting of Maleic Anhydride onto Polypropylene with 1-Decene as a Second Monomer
Lei CH, Li SL, Chen DH, Wu B, Huang WL |
| 111 - 119 |
Optical and Thermal Properties of Diethyl-(2R, 3R) (+)-tartrate Based Chiral Polyurethanes with Main Chain Amido Chromophores
Varkey EC, Sreekumar K |
| 120 - 133 |
Novel Grafted Nafion Membranes for Proton-Exchange Membrane Fuel Cell Applications
Eldin MSM, Elzatahry AA, El-Khatib KM, Hassan EA, El-Sabbah MM, Abu-Saied MA |
| 134 - 141 |
Preparation and Radiation Effect on Composite Films Containing Both Polypropylene and Novel Phthalocyanines with Functionalized Bulky Phenoxy Groups
Youssef TE, Ghaffar AMA |
| 142 - 147 |
Characterization and Electrical Conductivity of Poly(ethylene glycol)/Polyacrylonitrile/Multiwalled Carbon Nanotube Composites
Aqeel SM, Kucukyavuz Z |
| 148 - 154 |
Studies on Effect of Improved d-Spacing of Montomorillonite on Properties of Poly(vinyl chloride) Nanocomposites
Shimpi NG, Mishra S |
| 155 - 161 |
Fabrication of Surfactant-Removed Polymer Composites with Single-Walled Carbon Nanotube Networks
Zhang C, Wen B, Gao L, Chen YM, Yang MS |
| 162 - 172 |
Nonisothermal Crystallization Behavior of Highly Exfoliated Polypropylene/Clay Nanocomposites Prepared by In Situ Polymerization
Liu X, He AH, Du K, Han CC |
| 173 - 182 |
Miscibility Study of Poly(vinyl chloride)/Poly(methyl methacrylate-co-4-vinylpyridine) by Viscosimetry, DSC, and FTIR
Benmerad MF, Djadoun S, Alothman ZA, Aouak T |
| 183 - 189 |
Synthesis of Acetophenone Formaldehyde Resin Containing ABA Type Block Copolymers by ATRP
Canak TC, Kizilcan N, Serhatli IE |
| 190 - 200 |
PE/OMMT Nanocomposites Catalyzed by the OMMT-Intercalated Et[Ind](2)ZrCl2 in Slurry Polymerization: Effects of Organic Solvent on Ethylene Polymerization Behaviors and the Nanocomposite Structures
Huang YJ, Qin YW, Dong JY |
| 201 - 208 |
Effect of Flyash Content, Particle Size of Flyash, and Type of Silane Coupling Agents on the Properties of Recycled Poly(ethylene terephthalate)/Flyash Composites
Joseph S, Bambola VA, Sherhtukade VV, Mahanwar PA |
| 209 - 218 |
Self-Emulsifying Binders for Water-Borne Coatings-Synthesis and Characteristics of Maleated Alkyd Resins
Heiskanen N, Jamsa S, Paajanen L, Koskimies S |
| 219 - 224 |
Fluorescence Spectroscopy as a Non Invasive Tool to Follow In Situ the Polymerization in Miniemulsion
Frochot C, Mascherin M, Haumont A, Viriot ML, Marie E |
| 225 - 234 |
PET/PC Blends: Effect of Chain Extender and Impact Strength Modifier on Their Structure and Properties
Pesetskii SS, Jurkowski B, Filimonov OV, Koval VN, Golubovich VV |
| 235 - 241 |
Effect of Corn-Zein Coating on the Mechanical Properties of Polypropylene Packaging Films
Tihminlioglu F, Atik ID, Ozen B |
| 242 - 251 |
Influence of Thermal Ageing on Surface Degradation of Ethylene-Propylene-Diene Elastomer
Nevshupa R, Martinez L, Alvarez L, Lopez MF, Huttel Y, Mendez J, Roman E |
| 252 - 264 |
Electropolymerization Kinetics of a Binary Mixture of o-Phenylenediamine and 2-Aminobenzothiazole and Characterization of the Obtained Polymer Films
Sayyah SM, El-Rehim SSA, Kamal SM, El-Deeb MM, Azooz RE |
| 265 - 274 |
Computer Modeling Study on the Phase Morphology of PS-b-PMMA Copolymers
Mu D, Li JQ, Wang S |
| 275 - 281 |
Preparation of Phenolic Resin/Organized Expanded Vermiculite Nanocomposite and Its Application in Brake Pad
Yu JY, He J, Ya CQ |
| 282 - 289 |
Surface Modification of MWNTs with BA-MMA-GMA Terpolymer by Single-Step Grafting Technique
Xia R, Li MH, Zhang YC, Qian JS, Yuan XY |
| 290 - 299 |
Nonisothermal Crystallization Kinetics Study of LDPE/MWCNT Nanocomposites: Effect of Aspect Ratio and Surface Modification
Abbasi SH, Hussein IA, Parvez MA |
| 300 - 310 |
Miscibility Enhancement Through Hydrogen Bonding Interaction of Biodegradable Poly(3-hydroxybutyrate) Blending with Poly(styrene-co-vinyl phenol) Copolymer
Kuo SW, Liu WC |
| 311 - 318 |
Fabrication and Properties of High Performance PEEK/Si3N4 Nanocomposites
Balaji V, Tiwari AN, Goyal RK |
| 319 - 324 |
Effect of Polyethylene Glycol on Phase and Morphology of Calcium Carbonate
Xu XY, Zhao Y, Lai QY, Hao YJ |
| 325 - 329 |
Alignment of a Nematic Liquid Crystal on Nano-Grooved Material
Gwag JS, Yi J, Kwon JH, Yoneya M, Yokoyama H |
| 330 - 335 |
Microencapsulation and Application of Fluorine-Free Water Repellent Agent-AH102
Li YH, Cai ZS |
| 336 - 342 |
Surface Analysis of Aminated Polypropylene Films as an Adhesion Promoter to Polycarbonate Film
Vazquez-Rodriguez S, Sanchez-Valdes S, Rodriguez-GonzaLez F, Castillon-Barraza FF, Gonzalez-Gonzalez VA, Gonzalez-Cantu MC |
| 343 - 351 |
Preparation and Characterization of Exfoliated Layered Double Hydroxide/Silicone Rubber Nanocomposites
Pradhan B, Srivastava SK, Ananthakrishnan R, Saxena A |
| 352 - 362 |
Coupled-Single-Particle and Monte Carlo Model for Propylene Polymerization
Wang W, Zheng ZW, Luo ZH |
| 363 - 370 |
Adsorption Capacity, Kinetics, and Mechanism of Copper(II) Uptake on Gelatin-Based Hydrogels
Kumari M, Chauhan GS |
| 371 - 376 |
Colloidal Properties of Copolymer-Encapsulated and Surface-Modified Pigment Dispersion and Its Application in Inkjet Printing Inks
Fu SH, Du CS, Zhang K, Wang CX |
| 377 - 386 |
Synthesis of Oxadiazole-Based Polymers Containing a Carbazole-Vinylene or Fluorene-Vinylene Group and Their Hole-Injection/Transport Behavior in Light-Emitting Diodes
Wang H, Ryu JT, Kwon Y |
| 387 - 395 |
Preparation of Microwave-Assisted Polymer-Grafted Softwood Kraft Pulp Fibers. Enhanced Water Absorbency
Goetz LA, Sladky JR, Ragauskas AJ |
| 396 - 411 |
Stereology-Based Quantitative Characterization of Dispersion from TEM Micrographs of Polymer-Clay Nanocomposites
Basu SK, Fasulo PD, Rodgers WR |
| 412 - 418 |
Preparation and Characterization of Porous Poly(vinyl ester) Resin Monoliths as Separation Media
Yang J, Yang GL, Liu HY, Bai LG, Zhang QX |
| 419 - 437 |
A Three-Function Numerical Model for the Prediction of Vulcanization-Reversion of Rubber During Sulfur Curing
Milani G, Milani F |
| 438 - 442 |
Effect of Oxidized Polypropylene as a New Compatibilizer on the Water Absorption and Mechanical Properties of Wood Flour-Polypropylene Composites
Najafi SK, Bahra A, Abdouss M |
| 443 - 451 |
Thermal and Mechanical Properties of Wood Flour-Polystyrene Blends from Postconsumer Plastic Waste
Lisperguer J, Bustos X, Saravia Y |
| 452 - 459 |
Synthesis and Properties of Poly(methyl methacrylate)/Carbon Nanotube Composites Covalently Integrated Through In Situ Radical Polymerization
Cui LQ, Tarte NH, Woo SI |
| 460 - 471 |
Styrene/Phosphonic Acid Copolymers: Synthesis and Thermal, Mechanical, and Electrochemical Characterization
Santos LEP, Hanamoto LS, Pereira RP, Rocco AM, Felisberti MI |
| 472 - 481 |
Effects of Aging on the Thermomechanical Properties of Poly(lactic acid)
Niaounakis M, Kontou E, Xanthis M |
| 482 - 490 |
Morphological Study of Two-Phase Polymer Blends During Compounding in a Novel Compounder on the Basis of Elongational Flows
Bouquey M, Loux C, Muller R, Bouchet G |
| 491 - 499 |
Online Monitoring of the Influence of the Chemical Structure of Hindered Amines on the Hydrolysis of Polycarbonate in a Polycarbonate/Poly(acrylonitrile-butadiene-styrene) Blend by Ultraviolet-Visible Spectroscopy
Rajan VV, Steinhoff B, Alig I, Waber R, Wieser J |
| 500 - 504 |
Reactive Dyeing of Cationized Cotton: Effects on the Dyeing Yield and the Fastness Properties
Tutak M, Ozdemir AO |
| 505 - 514 |
Nitrile Rubber/Organomontmorillonite Nanocomposites Produced by Solution and Melt Compounding: Effect of the Polarity of the Quaternary Ammonium Intercalants
Soares BG, de Oliveira M, Zaioncz S, Gomes ACO, Silva AA, Santos KS, Mauler RS |
| 515 - 522 |
Development and Characterization of Novel Modified Red Mud Nanocomposites Based on Poly(hydroxy ether) of Bisphenol A
Bhat AH, Khalil HPSA, Bhat IU, Banthia AK |
| 523 - 529 |
Aliphatic Polyurethane-Montmorillonite Nanocomposite Coatings: Preparation, Characterization, and Anticorrosive Properties
Ashhari S, Sarabi AA, Kasiriha SM, Zaarei D |
| 530 - 538 |
Thermal Oxidation-Induced Long Chain Branching and Its Effect on Phase Separation Kinetics of a Polyethylene Blend
Niu YH, Wang ZG, Duan XL, Shao W, Wang DJ, Qiu J |
| 539 - 547 |
Sepiolite-Reinforced Epoxy Nanocomposites: Thermal, Mechanical, and Morphological Behavior
Nohales A, Munoz-Espi R, Felix P, Gomez CM |
| 548 - 557 |
Comparative Studies on Corrosion Protection Properties of Polyimide-Silica and Polyimide-Clay Composite Materials
Huang TC, Hsieh CF, Yeh TC, Lai CL, Tsai MH, Yeh JM |
| 558 - 564 |
Polyaniline-Polypropylene Melt-Spun Fiber Filaments: The Collaborative Effects of Blending Conditions and Fiber Draw Ratios on the Electrical Properties of Fiber Filaments
Soroudi A, Skrifvars M, Liu HW |
| 565 - 571 |
Melt-Rheological Behavior of High-Solid Cement-in-Polymer Dispersions
Hojczyk M, Weichold O |
| 572 - 576 |
Effect of Cocatalysts on Ethylene Polymerization with Fluorinated Bisphenoxyimine Titanium as a Catalyst
Li T, Kong FW, Liu R, Li ZY, Zhu FM |
| 577 - 585 |
Characterization and Caffeine Release Properties of N-isopropylacrylamide/Hydroxypropyl Methacrylate Copolymer Hydrogel Synthesized by Gamma Radiation
El-Din HMN |
| 586 - 594 |
Microencapsulation of Disperse Dye Particles with Nano Film Coating Through Layer by Layer Technique
Zandi M, Hashemi SA, Aminayi P, Hosseinali F |
| 602 - 612 |
Starch-Grafted Polypropylene: Synthesis and Characterization
Khanna ND, Kaur I, Kumar A |
| 613 - 619 |
Removal of Phosphate by Using Copper-Loaded Poly(N-vinylimidazole) Hydrogels as Polymeric Ligand Exchanger
Ozmen F, Kavakli PA, Guven O |
| 620 - 628 |
Miniemulsion Copolymerizations of Styrene and Reactive Alkyl Methacrylate Costabilizers
Kusdianto CTL, Yu FE, Chern CS |
