| 2869 - 2881 |
Control of resin release from particleboards by gamma irradiation. I. Thermal decomposition behavior and structure morphology
El-Naggar AM, Kandeel KA, Khafaga MR, Zahran AH |
| 2882 - 2895 |
Effects of polymer solvents on the performance of cellulose acetate membranes in methanol/methyl tertiary butyl ether separation
Tabe-Mohammadi A, Villaluenca JPG, Kim HJ, Chan T, Rauw V |
| 2896 - 2902 |
Formation of hollow fibers in the melt-spinning process
Rwei SP |
| 2903 - 2912 |
Toughening of epoxy resin by functional-terminated polyurethanes and/or semicrystalline polymer powders
Wang HHS, Chen JC |
| 2913 - 2921 |
Natural zeolite polypropylene composite film preparation and characterization
Ozmihci F, Balkose D, Ulku S |
| 2922 - 2933 |
Synthesis of macroazoinitiator by direct polycondensation for block copolymerization of styrene and butadiene
Simon J, Bajpai A |
| 2934 - 2946 |
Blends of polypropylene with poly(vinyl butyral)
Cascone E, David DJ, Di Lorenzo ML, Karasz FE, Macknight WJ, Martuscelli E, Raimo M |
| 2947 - 2952 |
Application of phase dispersion-crosslinking synergism on recycling commingled plastic wastes
Fang ZP, Zeng MF, Cai GP, Xu CW |
| 2953 - 2957 |
Novel rapid-cure adhesives for low temperature using thiirane compound
Chino K, Suga K, Ikawa M, Satoh H |
| 2958 - 2977 |
Off-line monitoring of butyl acrylate and vinyl acetate homopolymerization and copolymerization in toluene
Jovanovic R, Dube MA |
| 2978 - 2990 |
Suspension characteristics of borate-crosslinked gels: Rheology and atomic force microscopy measurements
Goel N, Shah SN, Yuan WL, O'Rear EA |
| 2991 - 3000 |
Modification of three-component bismaleimide resin by poly(phthaloyl diphenyl ether) and related copolymers
Iijima T, Yuasa N, Tomoi M |
| 3001 - 3012 |
Development of formulations based on acrylate monomers for optical cable applications
Perera MCS |
| 3013 - 3021 |
Experimental estimation of gas-transport properties of linear low-density polyethylene membranes by an integral permeation method
Villaluenga JPG, Seoane B |
| 3022 - 3029 |
Miscibility of segmented polyurethane/poly(vinyl chloride) blends
Sudaryanto, Nishino T, Ueno M, Asaoka S, Nakamae K |
| 3030 - 3035 |
Interfacial and mechanical properties of gamma-Fe2O3/segmented polyurethane/poly(vinyl chloride) composites
Sudaryanto, Nishino T, Ueno M, Asaoka S, Nakamae K |
| 3036 - 3051 |
Modeling and simulation of the phase-inversion process during membrane preparation
Fernandes GR, Pinto JC, Nobrega R |
| 3052 - 3057 |
Swelling behavior of NR/EPDM rubber blends under compression strain
Botros SH, El Sayed AM |
| 3058 - 3066 |
Characterization of the vibrational damping loss factor and viscoelastic properties of ethylene-propylene rubbers reinforced with micro-scale fillers
Kwak GH, Inoue K, Tominaga Y, Asai S, Sumita M |
| 3067 - 3073 |
Dimethylammonium dimethyldithiocarbamate-accelerated sulfur vulcanization. I. Thermal stability and reactions with curatives
Shumane M, Gradwell MHS, McGill WJ |
| 3074 - 3083 |
Dimethylammonium dimethyldithiocarbamate-accelerated sulfur vulcanization. II. Vulcanization of rubbers and model compound 2,3-dimethyl-2-butene
Shumane M, Gradwell MHS, McGill WJ |
| 3084 - 3090 |
Barium chloride crosslinked carboxymethyl guar gum beads for gastrointestinal drug delivery
Thimma RT, Tammishetti S |
| 3091 - 3098 |
Processing, crystallization, and dynamic mechanical analysis of high molar mass polysiloxane-modified PP/CaCO3 composites
Renger CJ, Burrows SJ, Shanks RA |
| 3099 - 3108 |
Low-energy electron beam-induced cationic polymerization with onium salts
Boey FYC, Chia NK, Rath SK, Abadie MJM |
| 3109 - 3117 |
Structure and properties of semiinterpenetrating polymer networks based on polyurethane and nitrochitosan
Liu HQ, Zhang L |
| 3118 - 3125 |
In situ analysis of volatiles obtained from the catalytic cracking of polyethylene
Hesse ND, Lin R, Bonnet E, Cooper J, White RL |
