| 2235 - 2241 |
Coupling mechanism and fatigue behavior of vinyl triethoxysilane-treated carbon black-styrene-butadiene rubber vulcanizate
Rana SK |
| 2242 - 2253 |
Cellulosic nanocomposites. I. Thermally deformable cellulose hexanoates from heterogeneous reaction
Matsumura H, Sugiyama J, Glasser WG |
| 2254 - 2261 |
Cellulosic nanocomposites. II. Studies by atomic force microscopy
Matsumura H, Glasser WG |
| 2262 - 2271 |
Determination of activation energy and preexponential factor of thermoset reaction kinetics using differential scanning calorimetry in scanning mode: Influence of baseline shape on different calculation methods
Dupuy J, Leroy E, Maazouz A |
| 2272 - 2289 |
Nylon 11/silica nanocomposite coatings applied by the HVOF process. II. Mechanical and barrier properties
Petrovicova E, Knight R, Schadler LS, Twardowski TE |
| 2290 - 2301 |
Vulcanization of chlorobutyl rubber. I. The identification of crosslink precursors in compounds containing ZnO/ZnCl2
Hendrikse KG, McGill WJ, Reedijk J, Nieuwenhuizen PJ |
| 2302 - 2310 |
Vulcanization of chlorobutyl rubber. II. A revised cationic mechanism of ZnO/ZnCl2 initiated crosslinking
Hendrikse KG, McGill WJ |
| 2311 - 2317 |
Rolling contact crack growth in a PMMA disc
Al-Sabti SI, Stolarski TA |
| 2318 - 2326 |
Polymerization of ethylene and ethylene/1-hexene over Ziegler-Natta/metallocene hybrid catalysts supported on SiO2 prepared by a sol-gel method
Cho HS, Choi DJ, Lee WY |
| 2327 - 2344 |
Morphology, mechanical properties, and failure topography of semi-interpenetrating polymer networks based on natural rubber and polystyrene
Mathew AP, Packirisamy S, Thomas S |
| 2345 - 2357 |
Effects of moisture and degradation time over the mechanical dynamical performance of starch-based biomaterials
Mano JF, Reis RL, Cunha AM |
| 2358 - 2362 |
C-13 solid-state NMR analysis of the DGEBA/TETA epoxy system
Tavares MIB, D'Almeida JRM, Monteiro SN |
| 2363 - 2368 |
Study on co[poly(butylene terephthalate-p-oxybenzoate)] thermotropic copolyester. II. Thermal behavior and crystalline morphology
Ou CF |
| 2369 - 2378 |
Py-GC/MS an effective technique to characterizing of degradation mechanism of poly (L-lactide) in the different environment
Khabbaz F, Karlsson S, Albertsson AC |
| 2379 - 2388 |
Solid-state C-13-NMR study on bismaleimide/diamine polymerization: Structure, control of particle size, and mechanical properties
Regnier N, Fayos M, Lafontaine E |
| 2389 - 2397 |
Preparation of oxygen gas barrier polypropylene films by deposition of SiOx films plasma-polymerized from mixture of tetramethoxysilane and oxygen
Inagaki N, Tasaka S, Nakajima T |
| 2398 - 2404 |
Preparation of functionally gradient materials via frontal polymerization
Chekanov YA, Pojman JA |
| 2405 - 2415 |
Reactive processing of polyolefins with MAH and GMA in the presence of various additives
Chandranupap P, Bhattacharya SN |
| 2416 - 2424 |
Poly(ethylene-graft-ethylene oxide) (PE-PEO) and poly(ethylene-co-acrylic acid) (PEAA) as compatibilizers in blends of LDPE and polyamide-6
Hallden A, Ohlsson B, Wesslen B |
