| 2347 - 2351 |
Effect of crosslinker, buffer and blending on damping properties of poly(styrene-acrylonitrile)/poly(ethyl acrylate-n-butyl acrylate) latex interpenetrating polymer networks
Li SC, Zeng W |
| 2352 - 2357 |
Polysiloxane modified epoxy networks. IV. Catalytic effect on fracture behaviors of jointed interpenetrating polymer networks
Wu SY, Lee SL, Chang WL, Sung PH |
| 2358 - 2365 |
Morphology and mechanical properties of unidirectional sisal-epoxy composites
Oksman K, Wallstrom L, Berglund LA, Toledo RD |
| 2366 - 2371 |
Melt-spinning process of a tetrafluoroethylene-hexafluoropropylene copolymer
Uno T, Miyata S, Shirai H |
| 2372 - 2379 |
Synthesis of 5-vinyl-m-phenylene-m'-phenylene-32-crown-10 and its radical polymerization behavior
Jin LY, Mah S |
| 2380 - 2385 |
Studies on graft copolymerization of 4-vinylpyridine onto guar gum
Taunk K, Behari K |
| 2386 - 2396 |
Conversion of soybean oil into ion exchange resins: Removal of copper (II), nickel (II), and cobalt (II) ions from dilute aqueous solution using carboxylate-containing resin
Liu ZS, Erhan SZ |
| 2397 - 2403 |
The effect of particle concentration of poly(p-phenylene) on electrorheological response
Sohn JI, Sung JH, Choi HJ, Jhon MS |
| 2404 - 2410 |
Studies on fly ash-filled epoxy-cast slabs under compression
Kulkarni SM, Kishore |
| 2411 - 2424 |
The development of controllable complex curing agents for epoxy resins. II. Examining the dissociation and thermal behavior of transition metal-diamine complex-epoxy blends
Hamerton I, Hay JN, Herman H, Howlin BJ, Jepson P, Gillies DG |
| 2425 - 2431 |
Photo-induced emulsion polymerization of vinyl acetate in the presence of poly(oxyethylene)(10) nonyl phenyl ether ammonium sulfate, an anionic emulsifier (I)
Mah S, Koo D, Jeon H, Kwon S |
| 2432 - 2439 |
Nitroxide-terminated poly (styrene-co-diethyl fumarates) and derived block copolymers
Lokaj J, Holler P, Kovarova J |
| 2440 - 2450 |
Comparative study of the nucleation activity of third-generation sorbitol-based nucleating agents for isotactic polypropylene
Marco C, Ellis G, Gomez MA, Arribas JM |
| 2451 - 2460 |
Ultrasonic improvement of rheological behavior of polystyrene
Chen GS, Guo SY, Li HL |
| 2461 - 2473 |
Sulfonation of polysulfones: Suitability of the sulfonated materials for asymmetric membrane preparation
Blanco JF, Nguyen QT, Schaetzel P |
| 2474 - 2480 |
Novel biocompatible waterborne polyurethane using L-lysine as an extender
Chen H, Jiang XW, He L, Zhang T, Xu M, Yu XH |
| 2481 - 2488 |
Spectral dispersion curves of polymeric birefringent textile fibers
Hamza AA, Fouda IM, Sokkar TZN, Sadik AM, El-Bakkary MA |
| 2489 - 2497 |
Effect of winding speed on the structure and properties of as-spun poly(trimethylene 2,6-naphthalenedicarboxylate) fibers as compared to poly(ethylene terephthalate) fibers
Stier U, Oppermann W |
| 2498 - 2504 |
Optimization of a commercial brake pad formulation
Lu YF, Tang CF, Wright MA |
| 2505 - 2511 |
Sorption properties of the composite fibers made of PAN and chitosan
Min BG, Kim CW |
| 2512 - 2522 |
Effect of ultrasound on the physicochemical properties of organosolv lignins from wheat straw
Sun RC, Sun XF, Xu XP |
| 2523 - 2532 |
Thermoreversible hydrogels. XV. Swelling behaviors and drug release for thermoreversible hydrogels containing silane monomers
Lee WF, Yuan WF |
| 2533 - 2540 |
Viscosity of polydimethylsiloxane gum: Shear and temperature dependence from dynamic and capillary rheometry
Swallow FE |
| 2541 - 2553 |
Ability of iron(III)-loaded carboxylated polyacrylamide-grafted sawdust to remove phosphate ions from aqueous solution and fertilizer industry wastewater: Adsorption kinetics and isotherm studies
Unnithan MR, Vinod VP, Anirudhan TS |
| 2554 - 2560 |
Improvement of physical properties of crosslinked alginate and carboxymethyl konjac glucomannan blend films
Xiao CB, Weng LH, Zhang LN |
| 2561 - 2571 |
Acetal-induced strength increases and lower resin content of MUF and other polycondensation adhesives
Pizzi A, Beaujean M, Zhao C, Properzi M, Huang Z |
