| 3033 - 3044 |
Closed-loop recycling of postused PP-filled garden chairs using the restabilization technique. Part 2: Material performance during accelerated heat aging
Kartalis CN, Papaspyrides CD, Pfaendner R |
| 3045 - 3057 |
Empirical viscosity model for polymers with power-law flow behavior
Chen ZL, Chao PY, Chiu SH |
| 3058 - 3065 |
Initial droplet size distribution in miniemulsion polymerization
Sood A, Awasthi SK |
| 3066 - 3069 |
Hydrogen-containing silicone resin as the crosslinking agent of heat-curable silicone rubber
Zhao S, Feng S |
| 3070 - 3077 |
Elongational rheology of LLDPE/LDPE blends
Ajji A, Sammut P, Huneault MA |
| 3078 - 3083 |
Comparison between the effects of alcohols and diols on polymethyl-methacrylate and polyacrylamide with positron annihilation lifetime and electric conductivity measurements
Gomaa E, Mazzroua A, Mohamed M |
| 3084 - 3092 |
H2O2 as a modifier of phenol-formaldehyde resin used in the production of particleboards
Czarnecki R, Lecka J |
| 3093 - 3099 |
Poly(propylene)-poly(propylene)-grafted maleic anhydride-organic montmorillonite (PP-PP-g-MAH-Org-MMT) nanocomposites. II. Nonisothermal crystallization kinetics
Xu WB, Liang GD, Wang W, Tang SP, He PS, Pan WP |
| 3100 - 3109 |
Study on PET/PP microfibrillar composites. I. Morphological development in melt extrusion
Lin XD, Cheung WL |
| 3110 - 3116 |
Compatibilization and toughening of poly(2,6-dimethyl-1, 4-phenylene oxide)/polyamide 6 alloy with poly(ethylene 1-octene): Mechanical properties, morphology, and rheology
Wang XD, Feng W, Li HQ, Jin RG |
| 3117 - 3131 |
Surface characteristics of hydrosilylated polypropylene
Long J, Tzoganakis C, Chen P |
| 3132 - 3138 |
Effect of surface-modifying macromolecules and membrane morphology on fouling of polyethersulfone ultrafiltration membranes
Zhang L, Chowdhury G, Feng C, Matsuura T, Narbaitz R |
| 3139 - 3150 |
Foam extrusion of high density polyethylene/wood-flour composites using chemical foaming agents
Li QX, Matuana LM |
| 3151 - 3158 |
Polyimide bonded magnets: Processing and properties
Yudin VE, Otaigbe JU, Bui TX, Svetlichnyi VM |
| 3159 - 3167 |
Chemical modification of controlled-pore silica with N-propylsalicylaldimine
Abou-El-Sherbini K, Kenawy IMM, Issa RM |
| 3168 - 3175 |
Structure and properties of hybrid poly(2-hydroxyethyl methacrylate)/SiO2 monoliths
Ji XL, Jiang SC, Qiu XP, Dong DW, Yu DH, Jiang BZ |
| 3176 - 3182 |
Synthesis and characterization of degradable copoly(trans-4-hydroxy-L-proline/epsilon-caprolactone)
Lee RS, Yang JM |
| 3183 - 3187 |
Small-angle X-ray scattering analysis of nanophase titanium dioxide, poly[N-(4-sulfophenyl)aniline], and their composite
Narsimu N, Kuo YD, Wu CG |
| 3188 - 3195 |
Preparation of chlorinated poly(vinyl chloride)-g-poly(N-vinyl-2-pyrrolidinone) membranes and their water permeation properties
Kang JS, Lee SH, Huh H, Shim JK, Lee YM |
| 3196 - 3201 |
Ultrasonic and viscometric investigations of a poly(vinyl alcohol)-dextran mixture in aqueous solution
Sahoo PK, Mohapatra R, Sahoo A, Swain SK |
| 3202 - 3211 |
Changes in orientation caused by UV irradiation of nylon 6 fibers
Fouda IM, Shabana HM, El-Sharkawy FM |
| 3212 - 3217 |
Synthesis and gelation of novel fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide copolymers containing triol segments-interaction of these fluorinated gels with various hydrophilic compounds
Sawada H, Fujisawa A, Kawase T |
| 3218 - 3224 |
Mechanical and dielectric properties of polymer composites containing tubules
Chiou BS, Lankford AR, Schoen PE |
| 3225 - 3231 |
PP-PP-g-MA-Org-MMT nanocomposites. 1. Intercalation behavior and microstructure
Xu WB, Liang GD, Wang W, Tang SP, He PS, Pan WP |
| 3232 - 3238 |
Investigation of microstructure of 4-vinyl pyridine-methacylonitrile copolymers by NMR spectroscopy
Hooda S, Brar AS |
| 3239 - 3247 |
Film extrusion and film weldability of poly(lactic acid) plasticized with triacetine and tributyl citrate
Ljungberg N, Andersson T, Wesslen B |
| 3248 - 3255 |
A new type synthetic filter material for biofilter: Poly(vinyl alcohol)/peat composite bead
Chan WC, Lu MC |
| 3256 - 3263 |
Steady viscoelastic diffusion
Vrentas JS, Vrentas CM |
| 3264 - 3272 |
Enhanced corrosion protection coatings prepared from soluble electronically conductive polypyrrole-clay nanocomposite materials
Yeh JM, Chin CP, Chang S |
| 3273 - 3278 |
Vinyl polymerization of norbornene with dinuclear diimine nickel dichloride/MAO
Mi X, Ma Z, Cui N, Wang LY, Ke YC, Hu YL |
| 3279 - 3283 |
PET microfiber prepared by carbon dioxide laser heating
Suzuki A, Mochizuki N |
| 3284 - 3290 |
Effects of lignin as a filler on properties of soy protein plastics. 1. Lignosulfonate
Huang J, Zhang LN, Chen FG |
| 3291 - 3297 |
Effects of lignin as a filler on properties of soy protein plastics. II. Alkaline lignin
Huang J, Zhang LN, Chen P |
| 3298 - 3305 |
Fracture properties of nanoclay-filled polypropylene
Chen L, Wong SC, Pisharath S |
| 3306 - 3307 |
Compatibilization and property characterization of polycarbonate/polyurethane polymeric alloys (vol 88, pg 612, 2003)
Archondouli PS, Kallitsis JK, Kalfoglou NK |
