| 685 - 692 |
Preparation and Properties of a Carboxyl-Terminated Butadiene Acrylonitrile Toughened Epoxy/Montmorillonite Nanocomposite
Lee HB, Kim HG, Yoon KB, Lee DH, Min KE |
| 693 - 699 |
Viscoelastic Behavior of Rubber Under a Complex Loading
Suphadon N, Thomas AG, Busfield JJC |
| 700 - 708 |
Investigations of Chemically Synthesized Poly(aniline-co-o-toluidine)s Doped with Dodecylbenzenesulfonic Acid
Shreepathi S, Holze R |
| 709 - 715 |
Bulk Free-Radical Polymerization of Styrene on a Spinning Disc Reactor
Moghbeli MR, Mohammadi S, Alavi SM |
| 716 - 720 |
Comparative Study of the Mechanical Properties of Fiber-Reinforced Denture Base Resin
Koroglu A, Ozdemir T, Usanmaz A |
| 721 - 729 |
Acrylic Rubber/Nitrile Rubber Blends: The Effect of Curatives on the Mechanical, Morphological, and Dynamic Mechanical Properties
Celestino ML, de Oliveira M, Sirqueira AS, Soares BG |
| 730 - 735 |
Monitoring Cure in Epoxies Containing Carbon Nanotubes with an Optical-Fiber Fresnel Refractometer
Dimopoulos A, Buggy SJ, Skordos AA, James SW, Tatam RP, Partridge IK |
| 736 - 741 |
Performance and Characterization of Irradiated Poly (vinyl alcohol)/Polyvinylpyrrolidone Composite Hydrogels Used as Cartilages Replacement
Zheng YD, Huang XS, Wang YJ, Xu H, Chen XF |
| 742 - 751 |
Conductive Polymer Tape Containing Highly Oriented Carbon Nanofillers
Deng H, Zhang R, Bilotti E, Loos J, Peijs T |
| 752 - 756 |
Effect of Low-Molar-Mass Liquid Crystal on the Melt Processing Conditions of Polycarbonate Using Single Screw Extruder
Khunprasert S, Thongyai S, Chinsirikul W, Wacharawichanant S |
| 757 - 766 |
Copper (II) Ions and Copper Nanoparticles-Loaded Chemically Modified Cotton Cellulose Fibers with Fair Antibacterial Properties
Mary G, Bajpai SK, Chand N |
| 767 - 776 |
Synthesis and Characterization of Novel Wholly Para-Oriented Aromatic Polyamide-Hydrazides Containing Sulfone-Ether Linkages
Mohamed NA, Fahmy MM |
| 777 - 783 |
Thermal, Optical, and Water Sorption Properties in Composite Films of Poly(ether imide) and Bismaleimides: Effect of Chemical Structure
Seo J, Jang W, Han H |
| 784 - 792 |
Functionalization of Ethylene-Propylene-Diene Monomer Rubber with Maleic Anhydride in the Melt State Through High-Shear Stress-Induced Initiation
Zhang L, Zhang YC, Yao HQ |
| 793 - 801 |
Use of Lignin Strengthened with Modified Wheat Gluten in Biodegradable Composites
El-Wakil NA |
| 802 - 810 |
Control of Microvoids in Resol Phenolic Resin Using Unsaturated Polyester
Parameswaran PS, Bhuvaneswary MG, Thachil ET |
| 811 - 817 |
Controlling the Release of Active Iron and Manganese Ions from Styrene-Butadiene Rubber-Binding Matrix Containing Chloride Salts of Them
Helaly FM, El Nashar D, Khalaf AI |
| 818 - 826 |
Synthesis and Antimicrobial Activity of Metronidazole Containing Polymer and Copolymers
Kenawy ER, Al-Deyab SS, Shaker NO, El-Sadek BM, Khattab AHB |
| 827 - 838 |
Synthesis, Characterization, and Anticorrosive Coating Properties of Waterborne Interpenetrating Polymer Network Based on Epoxy-Acrylic-Oleic Acid with Butylated Melamine Formaldehyde
Zafar S, Zafar F, Riaz U, Ahmad S |
| 839 - 848 |
Polyurethane Elastomers Based on 1,3 and 1,4-Bis(Isocyanatomethyl)cyclohexane
Xie R, Bhattacharjee D, Argyropoulos J |
| 849 - 854 |
Formulation and Curing Characteristics of EPDM/NR and EPDM/SBR Polyblends Used in Metallic Surfaces Rubber Lining
Rezaeian I, Zahedi P, Loghmani MS |
| 855 - 859 |
Preparation and Characterization of a Solid Polymer Electrolyte PEO-ENR50 (80/20)-LiCF3SO3
Noor SAM, Ahmad A, Rahman MYA, Talib IA |
| 860 - 867 |
Application of Urea/H2O2 Activation-Oxidation System in Degradation of PVA and Desizing of Polyester/Cotton Fabric
Shan JC, Guan Y, Zheng QK, Han JS, Liu QS, Pu ZY |
| 868 - 875 |
Effects of Ultrasonic Irradiation on the Morphology of Chemically Prepared Polyaniline Nanofibers
Li Y, Wang YY, Wu D, Jing XL |
| 876 - 886 |
Characterization, Crystallization Kinetics, and Melting Behavior of Poly(ethylene succinate) Copolyester Containing 7 mol % Butylene Succinate
Lu HY, Lu SF, Chen M, Chen CH, Tsai CJ |
| 887 - 895 |
UV-VIS Absorption and NIR-Stimulated Emission of Nd3+: PVA Films
Adiyodi AK, Jyothy PV, Unnikrishnan NV |
| 896 - 900 |
Synthesis and Photopolymerization Kinetics of Multifunctional Aliphatic Urethane Acrylates Containing the Tertiary Amine Group
Zhang J, Xiao P, Shi SQ, Nie J |
| 901 - 906 |
Determination of Crystallinity Ratio and Some Physicochemical Properties of Poly(4-methyl-1-pentene)
Yazici O, Cakar F, Cankurtaran O, Karaman F |
| 907 - 915 |
Crystallization Behavior of "Wet Brush" and "Dry Brush" Blends of PS-b-PEO-b-PS/h-PEO
Luo CY, Han X, Gao Y, Liu HL, Hu Y |
| 916 - 921 |
Fabrication of pH-Responsive Molecularly Imprinted Polyethersulfone Particles for Bisphenol-A Uptake
Zhao WF, Fang BH, Li N, Nie SQ, Wei Q, Zhao CS |
| 922 - 926 |
Polypropylene-Organoclay Nanocomposite: Preparation, Microstructure, and Mechanical Properties
Shariatpanahi H, Sarabi F, Mirali M, Hemmati M, Mahdavi F |
| 927 - 935 |
Electrospun Nanocomposites from Polystyrene Loaded with Cellulose Nanowhiskers
Rojas OJ, Montero GA, Habibi Y |
| 936 - 949 |
Comparative Study of the Release Kinetics of Osmotically Active Solutes from Hydrophobic Elastomeric Matrices Combined with the Characterization of the Depleted Matrices
Soulas DN, Sanopoulou M, Papadokostaki KG |
| 950 - 958 |
Influence of EMAA Compatibilizer on the Structure and Properties of HDPE/Hydrotalcite Nanocomposites Prepared by Melt Mixing
Ardanuy M, Velasco JI, Maspoch ML, Haurie L, Fernandez AI |
| 959 - 965 |
Self-Organization of Amphiphilic Poly[2-(methacryloyloxy)ethyl phosphorylcholine] Carrying Tocopheryl Moieties as Terminal Groups
Tanigawa N, Shiraishi K, Abe T, Sugiyama K |
| 966 - 975 |
Activated Charcoal-Loaded Composite Membranes of Sodium Alginate in Pervaporation Separation of Water-Organic Azeotropes
Aminabhavi TM, Patil MB, Bhat SD, Halgeri AB, Vijayalakshmi RP, Kumar P |
| 976 - 983 |
Residual Stress and Mechanical Properties of Polyimide Thin Films
Jang W, Seo J, Lee C, Paek SH, Han H |
| 984 - 991 |
Synthesis of Zwitterionic Stationary Phase Based on Hydrophilic Non-Porous Poly(glycidymethacrylate-co-ethylenedimethacrylate) Beads and their Application for Fast Separation of Proteins
Gong BL, Bo CM, Zhu JX, Yan C |
| 992 - 999 |
Enhancement of the Surface and Bulk Mechanical Properties of Polystyrene Through the Incorporation of Raw Multiwalled Nanotubes with the Twin-Screw Mixing Technique
Liu SP, Hsu WL, Chang KC, Yeh JM |
| 1000 - 1007 |
Effects of Wheat Straw Fiber Content and Characteristics, and Coupling Agent Concentration on the Mechanical Properties of Wheat Straw Fiber-Polypropylene Composites
Pan MZ, Zhou DG, Bousmina M, Zhang SY |
| 1008 - 1016 |
A Novel Method to Control Microcapsule Release Behavior Via Photo-Crosslink Polyurethane Acrylate Shells
Wang X, Li GQ, Wei J, Guan WW |
| 1017 - 1029 |
Methylolation of Melamine with Incipient Condensation. II. Mathematical Modeling
Nicolau VV, Estenoz DA, Meira GR |
| 1030 - 1041 |
Methylolation of Melamine with Incipient Condensation. I. Synthesis and Characterization
Nicolau VV, Martinelli M, Strumia MC, Estenoz DA, Meira GR |
| 1042 - 1049 |
Cure Characterization of Soybean Oil-Styrene-Divinylbenzene Thermosetting Copolymers
Badrinarayanan P, Lu YS, Larock RC, Kessler MR |
| 1050 - 1062 |
Synthesis of Highly Efficient D-naproxen Imprinted Polymer and Investigation of Their Specific Performance
Zhang ZL, Wang B |
| 1063 - 1069 |
Effect of Electron Beam Irradiation on the Silk Fibroin Fiber/Poly(epsilon-caprolactone) Composite
Li W, Qiao XY, Sun K, Chen XD |
| 1070 - 1081 |
Preparation and Comparison of Two Electrodes for Supercapacitors: Pani/CNT/Ni and Pani/Alizarin-Treated Nickel
Koysuren O, Du CS, Pan N, Bayram G |
| 1082 - 1089 |
Ultrasonic Sealing of Polyester and Spectra Fabrics Using Thermo Plastic Properties
Ghosh S, Reddy R |
| 1090 - 1096 |
A Novel Route of Synthesis, Characterization of Terephthalic Dihydrazide from Polyethylene Terephthalate Waste and it's Application in PVC Compounding as Plasticizer
Soni RK, Dutt K, Jain A, Soam S, Singh S |
| 1097 - 1110 |
Negative Air Ion Releasing Properties of Tourmaline/Bamboo Charcoal Compounds Containing Ethylene Propylene Diene Terpolymer/Polypropylene Composites
Yeh JT, Hsiung HH, Wei W, Zhu P, Chen KN, Jiang T |
| 1111 - 1119 |
Synthesis, Characterization, and Hydrolytic Degradation of Biodegradable Poly(ether ester)-Urethane Copolymers Based on epsilon-Caprolactone and Poly(ethylene glycol)
Gong CY, Fu SZ, Gu YC, Liu CB, Kan B, Deng HX, Luo F, Qian ZY |
| 1120 - 1124 |
Cellulose Mercerization: Use of Amino Acid-Glycerol Ethers as Wetting Agents
Varka EMA, Savidis G, Tsatsaroni EG, Elefteriadis G |
| 1125 - 1132 |
Preparation and Application of Norfloxacin-MIP/Polysulfone Blending Molecular Imprinted Polymer Membrane
Liu W, Wang B |
| 1133 - 1140 |
Preparation of Bovine Serum Albumin-Imprinted Calcium Polyacrylate/Alginate Hybrid Microspheres Via Ca2+ Crosslinking
Zhao KY, Wei JF, Cheng GX, Yang CX, Chen L |
| 1141 - 1145 |
Study on the Structure of Nylon 6 Films Iodinated Before Forming. III. Fine Structure Variation of the Amorphous Film Through Deiodination
Shin EJ, Lee SH, Lee JY, Lee YH |
| 1146 - 1154 |
Studies on Ethylene-Propylene-Diene Rubber Modification by N-Chlorothio-N-Butyl-Benzenesulfonamide
Zhang H, Datta R, Talma A, Noordermeer JWM |
| 1155 - 1164 |
Performance Studies of Heterogeneous Ion Exchange Membranes in the Removal of Bivalent Metal Ions in an Electrodialysis Stack
Ray P |
| 1165 - 1172 |
Mechanical Reinforcement of Poly(1-butene) Using Polypropylene-Grafted Multiwalled Carbon Nanotubes
Yang BX, Shi JH, Li X, Pramoda KP, Goh SH |
| 1173 - 1181 |
New Anthracene-Containing Phenylene- or Thienylene-Vinylene Copolymers: Synthesis, Characterization, Photophysics, and Photovoltaics
Vellis PD, Mikroyannidis JA, Bagnis D, Valentini L, Kenny JM |
| 1182 - 1187 |
The Effects of Experimental Parameters on the Extent of Intercalation of PMMA/MMT Nanocomposites Prepared in Solution
Huskic M, Zigon M |
| 1188 - 1197 |
Synthesis of Poly(vinyl alcohol)-graft-poly(epsilon-caprolactone) and poly(vinyl alcohol)-graft-poly(lactide)in Melt with Magnesium Hydride as Catalyst
Guerrouani N, Mas A, Schue F |
| 1198 - 1206 |
Pendent Polyimides Using Mellitic Acid Dianhydride. III. The Effect of Pendent Group Functionality on Polymer Properties
Illingsworth ML, Wang W, McCarney JP, Hughes KA, Trotter KJ, Stapleton RA, Chabot JR, Siochi EJ, Kotlarchyk M |
| 1207 - 1215 |
Synergistic Enhancement in Tensile Strength and Ductility of ABS by Using Recycled PETG Plastic
Li B, Zhang XL, Zhang Q, Chen F, Fu Q |
| 1216 - 1222 |
Synthesis and Evaluation of Poly(dioctyltin maleate-styrene-methyl acrylate) as a Stabilizer for Poly(vinyl chloride)
Liu JP, Shang HZ, Zheng YB, Song X |
| 1223 - 1231 |
Polymeric Calcium Phosphate Cements Incorporated with Poly-gamma-Glutamic Acid: Comparative Study of Poly-gamma-Glutamic Acid and Citric Acid
Kim SS, Seo M, Chung JW, Kwon SY, Kim YS |
| 1232 - 1240 |
Influence of Phenolic Curative on Crosslink Density and Other Related Properties of Dynamically Cured NR/HDPE Blends
Pechurai W, Sahakaro K, Nakason C |
| 1241 - 1246 |
In Situ Fast Gelling Formulation of Methyl Cellulose for In Vitro Ophthalmic Controlled Delivery of Ketorolac Tromethamine
Bain MK, Bhowmik M, Ghosh SN, Chattopadhyay D |
| 1247 - 1256 |
Effects of Layered Silicate Structure on the Mechanical Properties and Structures of Protein-Based Bionanocomposites
Chang PR, Yang Y, Huang J, Xia WB, Feng LD, Wu JY |
| 1257 - 1263 |
Physicomechanical and Thermal Properties of Moldings Made from Liquefied Wood-Based Novolak PF Resins Under Various Hot-Pressing Conditions
Lee WJ, Chen YC, Wu CC, Juan YM |
| 1264 - 1269 |
Preparation and Photocatalytic Activity of Zinc Sulfide/Polymer Nanocomposites
Zhou ZF, Feng Y, Xu WB, Ren FM, Ma HH |
| 1270 - 1275 |
A Novel Process to Isolate Fibrils from Cellulose Fibers by High-Intensity Ultrasonication, Part 1: Process Optimization
Wang SQ, Cheng QZ |
| 1276 - 1281 |
Electrokinetic Properties of Polypropylene-Layered Silicate Nanocomposite Fibers
Smole MS, Stakne K, Kleinschek KS, Kurecic M, Bele M, Svetec DG, Ribitsch V |
| 1282 - 1288 |
Melt Electrospinning from Poly(L-lactide) Rods Coated with Poly(ethylene-co-vinyl alcohol)
Tian S, Ogata N, Shimada N, Nakane K, Ogihara T, Yu M |
| 1289 - 1297 |
Preparation and Properties of One Epoxy System Bearing Fluorene Moieties
Liu WB, Qiu QH, Wang J, Huo ZC, Sun H, Zhao XX |
| 1298 - 1306 |
Composition, Thermal Properties, and Biodegradability of a New Biodegradable Aliphatic/Aromatic Copolyester
Han L, Zhu GX, Zhang W, Chen W |
| 1307 - 1315 |
Suspension Polymerization of Poly(methyl methacrylate)/Clay Nanocomposites
Clarke N, Hutchings LR, Robinson I, Elder JA, Collins SA |
| 1316 - 1329 |
Synthesis and Characterization of In Situ Sodium-Activated and Organomodified Bentonite Clay/Styrene-Butadiene Rubber Nanocomposites by a Latex Blending Technique
Chakraborty S, Sengupta R, Dasgupta S, Mukhopadhyay R, Bandyopadhyay S, Joshi M, Ameta SC |
| 1330 - 1334 |
Rapid Bending of a Nonliquid Crystal Azobenzene Polymer Film and Characteristics of Surface Relief Grating
Zhang CH, Zhao XG, Chao DM, Lu XF, Chen CH, Wang C, Zhang WJ |
| 1335 - 1344 |
Separation and Preconcentration of Some Heavy-Metal Ions Using New Chelating Polymeric Hydrogels
Sharaf MA, Arida HA, Sayed SA, Younis AA, Farag AB |
| 1345 - 1354 |
Experimental Rapid Surface Heating by Induction for Micro-Injection Molding of Light-Guided Plates
Huang MS, Tai NS |
| 1355 - 1363 |
Aramid-Short-Fiber Reinforced Rubber as a Tire Tread Composite
Kashani MR |
| 1364 - 1368 |
Self-Assembly and Drug Delivery Behaviors of Thermo-Sensitive poly(t-butyl acrylate)-b-poly (N-isopropylacrylamide) Micelles
Li GY, Guo L, Ma SM |
