| 671 - 679 |
Separation of Hematopoietic Stem and Progenitor Cells from Human Peripheral Blood Through Polyurethane Foaming Membranes Modified with Several Amino Acids
Higuchi A, Yang ST, Li PT, Chen H, Ruaan RC, Chen WY, Chang Y, Chang Y, Tsai EM, Ling QD, Wang HC, Hsu ST |
| 680 - 687 |
Synthesis and Characterization of Copolymers of Alkyl- and Azo-Thiophenes: Chromic Properties and Photoinduced Birefringence
Goncalves VC, Costa LMM, Cardoso MR, Mendonca CR, Balogh DT |
| 688 - 695 |
Investigation of Pluronic (c) F127-Water Solutions Phase Transitions by DSC and Dielectric Spectroscopy
Barba AA, d'Amore M, Grassi M, Chirico S, Lamberti G, Titomanlio G |
| 696 - 704 |
Monitoring the Stability of Nanosized Silica Dispersions in Presence of Polycations by a Novel Centrifugal Sedimentation Method
Petzold G, Goltzsche C, Mende M, Schwarz S, Jaeger W |
| 705 - 712 |
Polymerization of Fluoroacrylate and Guar Gum Copolymer as a New Pretreatment Paste for Ink-Jet Printing of Polyester
Chang SYP, Chao YC |
| 713 - 719 |
Thermal Degradation Analysis of Polyamide 6 Processed at Different Cycles Using Sequential Pyrolysis
Parres F, Crespo JE, Nadal-Gisbert A |
| 720 - 731 |
Chemical Modification of Unsaturated Polyesters Influence of Polyester's Structure on Thermal and Viscoelastic Properties of Low Styrene Content Copolymers
Worzakowska M |
| 732 - 741 |
Terminal Functionalized Hydroxyl-Terminated Polybutadiene: An Energetic Binder for Propellant
Shankar RM, Roy TK, Jana T |
| 742 - 753 |
Compatibilization of Low-Density Polyethylene/Cassava Starch Blends by Potassium Persulfate and Benzoyl Peroxide
Tanrattanakul V, Panwiriyarat W |
| 754 - 759 |
Properties and Morphology of Poly(lactic acid)/Soy Protein Isolate Blends
Fang K, Wang BB, Sheng KC, Sun XS |
| 760 - 768 |
Preparation and Characterization of Polysiloxane-Acrylate Latexes with MPS-PDMS Oligomer as Macromonomer
Yan P, Qiu LY |
| 769 - 774 |
UV-Grafted Gradient Surface Polyurethane Membrane
Zhao PZ, Hua XY, Wang YS, Zhu JH, Niu F |
| 775 - 783 |
Development of a Poloxamer Analogs/Bioadhesive Polymers-Based In Situ Gelling Ophthalmic Delivery System for Tiopronin
Jiang TY, Sun CS, Shen X, Wang TY, Wang SL |
| 784 - 793 |
Organic and Aqueous Compatible Polystyrene-Maleic Anhydride Copolymer Ultra-Fine Fibrous Membranes
Cecile C, Hsieh YL |
| 794 - 799 |
Nanofiber Organic Semiconductors: The Effects of Nanosize on the Electrical Charge Transport and Optical Properties of Bulk Polyanilines
Yakuphanoglu F, Mehrotra R, Gupta A, Munoz M |
| 800 - 805 |
Nano-Sized Chalk-Protein Deposits as Filler of Elastomers
Przepiorkowska A, Chronska K, Prochon M |
| 806 - 810 |
Preparation of Low-Protein Natural Rubber Latex: Effect of Polyethylene Glycol
Abhilash G, Sabharwal S, Dubey A, Paul J, John H, Joseph R |
| 811 - 817 |
Properties of Alkoxysilane Functionalized Polycaprolactone/Polydimethylsiloxane-Modified Epoxy Resin Composites: Effect of Curing Temperature and Compositions
Liu PG, Song JX, He LH, Liang XQ, Ding HY |
| 818 - 825 |
Preparation and Characterization of Improved Microspheres Containing Bovine Serum Albumin
Li F, Tian F, Liu CJ, Zhao YL |
| 826 - 833 |
Properties of Poly(vinyl chloride) and Polyesteramides Blends
Kalouskova R, Markvart L, Kredatusova J, Brozek J |
| 834 - 842 |
Thermal Decomposition of Natural Fibers: Global Kinetic Modeling with Nonisothermal Thermogravimetric Analysis
Yao F, Wu QL, Zhou DG |
| 843 - 846 |
Resiliency of Silicone O-Rings
Katzman HA, Ross FD, Valenzuela PR |
| 847 - 852 |
Effect of Poly(ethylene oxide)- Poly(ethylene glycol) Addition on Actuation Behavior of Cellulose Electroactive Paper
Mahadeva SK, Kim J, Kang KS, Kim HS, Park JM |
| 853 - 863 |
Effects of Expandable Graphite and Ammonium Polyphosphate on the Flame-Retardant and Mechanical Properties of Rigid Polyurethane Foams
Meng XY, Ye L, Zhang XG, Tang PM, Tang JH, Ji X, Li ZM |
| 864 - 873 |
High Shear Strain Rate Rheometry of Polymer Melts
Kelly AL, Gough T, Whiteside BR, Coates PD |
| 874 - 882 |
Synthesis of Processible Doped Polyaniline-Polyacrylic Acid Composites
Gupta B, Prakash R |
| 883 - 891 |
Preparation of Poly(ester imide) Ultrafine Fibers by Gas-Jet/Electrospinning
Wang B, Yao YY, Peng JR, Lin Y, Liu WL, Luo Y, Xiang RL, Li RX, Wu DC |
| 892 - 900 |
Synthesis of Thermoreactive Polysiloxanes with Cyclic Fragments in. the Side Chain
Mukbaniani O, Tatrishvili T, Titvinidze G, Patsatsia S |
| 901 - 910 |
Preparation and Characterization of Isotropic Polyurethane Magnetorheological Elastomer Through In Situ Polymerization
Wu JK, Gong XG, Chen L, Xia HS, Hu ZG |
| 911 - 918 |
A Kinetic Analysis on Thermal Degradation of Poly(phenylene sulfide ether)
Gu AQ, Yu ZL, Li YB |
| 919 - 927 |
Influence of the Incorporation of Fine Calcium Carbonate Particles on the Impact Strength of Polypropylene/Polystyrene-block-Poly(ethylene butene)-block-Polystyrene Blends
Hikasa S, Nagata K, Miyahara K, Izumi T, Suda T, Toyohara A, Kato A, Nakamura Y |
| 928 - 934 |
Synthesis and Characterization of Conducting Polyaniline Prepared by Laccase-Catalyzed Method in Sodium Dodecylbenzenesulfonate Micellar Solutions
Streltsov AV, Morozova OV, Arkharova NA, Klechkovskaya VV, Staroverova IN, Shumakovich GP, Yaropolov AI |
| 935 - 939 |
Strain Effect on Recovery Behaviors from Circular Deformation of Natural Rubber Vulcanizate
Choi SS, Han DH |
| 940 - 947 |
Effect of Surface Esterification with Octenyl Succinic Anhydride on Hydrophilicity of Corn Starch Films
Zhou J, Ren LL, Tong J, Ma YH |
| 948 - 955 |
Adsorption of Cr(VI) ions onto Poly(ethylene glycol dimethacrylate-1-vinyl-1,2,4-triazole)
Kara A |
| 956 - 961 |
A Simple Method for the Preparation of Stable Chitooligomers
Zeng LT, Qin CQ, Li W, Wang W |
| 962 - 970 |
New Generation Polymeric Nanospheres for Catalase Immobilization
Akgol S, Ozturk N, Denizli A |
| 971 - 977 |
Synthesis and Characterization of a Silicone Resin with Silphenylene Units in Si-O-Si Backbones
Jia MQ, Wu CB, Li W, Gao DH |
| 978 - 992 |
Effects of Two Different Maleic Anhydride-Modified Adhesion Promoters (PP-g-MA) on the Structure and Mechanical Properties of Nanofilled Polyolefins
Etelaaho P, Nevalainen K, Suihkonen R, Vuorinen J, Jarvela P |
| 993 - 1001 |
Structural and Mechanical Behavior of Layered Zirconium Phosphonate as a Distributed Phase in Polycaprolactone
Furman BR, Wellinghoff ST, Laine RM, Chan KS, Nicolella DP, Rawls HR |
| 1002 - 1010 |
Positive Temperature Coefficient and Time-Dependent Resistivity of Carbon Nanotubes (CNTs)/Ultrahigh Molecular Weight Polyethylene (UHMWPE) Composite
Gao JF, Yan DX, Huang HD, Dai K, Li ZM |
| 1011 - 1017 |
Hydrolytic Stability of Cured Urea-Formaldehyde Resins Modified by Additives
Abdullah ZA, Park BD |
| 1018 - 1024 |
Elongational Behavior of Epoxy During Curing
Takiguchi O, Sugimoto M, Taniguchi T, Koyama K |
| 1025 - 1032 |
The Effects of Soft-Segment Molecular Weight and Organic Modifier on Properties of Organic-Modified MMT-PU Nanocomposites
Wang CH, Shieh YT, Nutt S |
| 1033 - 1039 |
High-Performance Bio-Based Thermosetting Resins Composed of Dehydrated Castor Oil and Bismaleimide
Hirayama KI, Irie T, Teramoto N, Shibata M |
| 1040 - 1047 |
Homopolymerization Effects in Polymer Layered Silicate Nanocomposites Based Upon Epoxy Resin: Implications for Exfoliation
Pustkova P, Hutchinson JM, Roman F, Montserrat S |
| 1048 - 1054 |
A Series of 0-3 Composites of Lead Zirconate Titanate and Ferroelectric Nylon77: Preparation and Electrical Properties
Petchsuk A, Supmak W, Thanaboonsombut A |
| 1055 - 1063 |
A New Method to Determine Monomer Concentration in the Polymer Particles of Emulsion Polymerization Systems by Dynamic Light Scattering
Abdollahi M, Hemmati M |
| 1064 - 1069 |
Study on Macromolecular Lanthanide Complexes (V): Synthesis, Characterization, and Fluorescence Properties of Lanthanide Complexes with the Copolymers of Styrene and Acrylic Acid
Liang X, Yang Y, Jia XQ, Niu LE, Qi XH |
| 1070 - 1079 |
Preparation and Properties of Waterborne Interpenetrating Polymer Networks Composed of Polyurethaneurea and Graft Vinyl Ester Resin
Su T, Hu CP |
| 1080 - 1085 |
Polyesters Based on Two Silarylene or Germarylene Moieties: Synthesis Under Phase-Transfer Conditions
Tagle LH, Terraza CA, Leiva A, Alvarez P |
| 1086 - 1093 |
Synthesis and Characteristics of a Silicon-Containing Polymer, Manufacture of an Electrolyte Membrane from the Polymer and Poly(vinylidene fluoride-co-hexafluoropropene), and Property Testing of the Membrane
Ye L, Ju L, Wu C, Feng T, Mo W, Wu F, Bai Y, Feng ZG |
| 1094 - 1104 |
Copolymerization of alpha-Cyanovinyl Acetate with Acrylonitrile and Methacrylonitrile: Synthesis, Characterization, and Study of their Dielectric Behavior
Arous M, Kallel A, Kaddami H, Lahcini M, Belfkira A, Raihane M |
| 1105 - 1117 |
Poly(ethylene glycol-co-propylene glycol) as a Macromolecular Plasticizing Agent for Polylactide: Thermomechanical Properties and Aging
Jia ZY, Tan JJ, Han CY, Yang YN, Dong LS |
| 1118 - 1125 |
Improvement of the Properties of Ground Tire Rubber (GTR)-Filled Nitrile Rubber Vulcanizates Through Plasma Surface Modification of GTR Powder
Zhang XX, Zhu XQ, Liang M, Lu CH |
| 1126 - 1132 |
Optimization of Poly(ethylene terephthalate) Bottles Via Numerical Modeling: A Statistical Design of Experiment Approach
Demirel B, Daver F |
| 1133 - 1140 |
Nonisothermal Crystallization and Melting Behavior of Poly(epsilon-caprolactone)-b-Poly(ethylene glycol)-b-Poly(epsilon-caprolactone) by DSC Analysis
Wei ZY, Yu FY, Chen GY, Qu C, Wang P, Zhang WX, Liang JC, Qi M, Liu L |
| 1141 - 1149 |
Products of Reaction Between N,N'-Bis(2-hydroxyethyl)urea and Ethylene Carbonate and their Application to Obtain Polyurethane Foams
Zarzyka-Niemiec I |
| 1150 - 1159 |
Removal of Basic Dyes from Aqueous Solutions by Crosslinked-Acrylic Acid/Acrylamidopropane Sulfonic Acid Hydrogels
Akkaya MC, Emik S, Guclu G, Iyim TB, Ozgumus S |
| 1160 - 1168 |
Wood-Thermoplastic Composites from Wood Flour and High-Density Polyethylene
Xiong C, Qi RR, Wang YL |
| 1169 - 1175 |
The Properties of Reactive Hot Melt Polyurethane Adhesives Modified with Novel Thermoplastic Polyurethanes
Kim TK, Kim BK, Kim YS, Cho YL, Lee SY, Cho YB, Kim JH, Jeong HM |
| 1176 - 1186 |
Microstructure and Physical Properties of Open-Cell Polyolefin Foams
Rodriguez-Perez MA, Alvarez-Lainez M, de Saja JA |
| 1187 - 1194 |
Recycled Poly(ethylene terephthalate)/Linear Low-Density Polyethylene Blends Through Physical Processing
Zhang Y, Zhang HS, Yu YB, Guo WH, Wu CF |
| 1195 - 1201 |
Structure and Mechanical Properties of a Talc-Filled Polypropylene/Ethylene-Propylene-Diene Composite After Reprocessing in the Melt State
Sarrionandia M, Lopez-Arraiza A, Aurrekoetxea J, Arostegui A |
| 1202 - 1207 |
Thermal and Spectroscopic Studies of Poly(N-vinyl pyrrolidone)/Poly(vinyl alcohol) Blend Films
Abou-Taleb MH |
| 1208 - 1212 |
Synthesis and Properties of a New Type of Unsaturated Poly(ester amide)
Ai YP, Jiang F, Xie SK, Yi RX |
| 1213 - 1219 |
Preparation of Polyvinylidene Fluoride Membrane Via a Thermally Induced Phase Separation Using a Mixed Diluent
Lu XL, Li XF |
| 1220 - 1225 |
Preparation and Characterization of Chitosan/PEG/Gelatin Composites for Tissue Engineering
Hong H, Liu CS, Wu WJ |
| 1226 - 1234 |
Polyimides Derived from 1,4-Bis [3-oxy-(N-aminophthalimide)] Benzene
Li TH, Yan JL, Yang HL, Li DF, Wang Z, Ding MX |
| 1235 - 1240 |
Sodium Alginate/Na+-Rectorite Composite Films: Preparation, Characterization, and Properties
Yang LL, Liang GZ, Zhang ZP, He SB, Wang JH |
| 1241 - 1249 |
Synthesis of Functionalized Liquid Rubbers from Polylsoprene
Dubkov KA, Semikolenov SV, Ivanov DP, Babushkin DE, Matsko MA, Panov GI |
| 1250 - 1255 |
Preparation of Zr4+ Affinity Column by Atom Transfer Radical Polymerization for Phosphoprotein Isolation
Park JH, Bae IA, Choi SH |
| 1256 - 1263 |
Glass Fiber-Reinforced Composite Based on Benzoxazine Resin
Kimura H, Matsumoto A, Ohtsuka K |
| 1264 - 1269 |
Surface Properties of Poly(ethylene oxide)-Based Segmented Block Copolymers with Monodisperse Hard Segments
Husken D, Feijen J, Gaymans RJ |
| 1270 - 1277 |
Refolding of Lysozyme In Vitro Assisted by Colloidal Thermosensitive Poly(N-isopropylacrylamide) Brushes Grafted onto the Surface of Uniform Polystyrene Cores1
Ge X, Guan YX, Chen J, Yao Z, Cao K, Yao SJ |
| 1278 - 1286 |
Interactions Between Cationic Conjugated Polyelectrolyte and DNA and a Label-Free Method for DNA Detection Based on Conjugated Polyelectrolyte Complexes
Song H, Sun B, Gu KJ, Yang Y, Zhang Y, Shen QD |
| 1287 - 1294 |
Effect of Orotic Acid as a Nucleating Agent on the Crystallization of Bacterial Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Copolymers
Jacquel N, Tajima K, Nakamura N, Miyagawa T, Pan PJ, Inoue Y |
| 1295 - 1302 |
Characterization and Comparison of Acetosolv and Milox Lignin Isolated from Crofton Weed Stem
Zhao XB, Dai LM, Liu DH |
| 1303 - 1311 |
Crystallization Behavior and UV-Protection Property of PET-ZnO Nanocomposites Prepared by In Situ Polymerization
He JQ, Shao W, Zhang L, Deng C, Li CZ |
| 1312 - 1319 |
Polymer Crystallization and Precipitation-Induced Wrapping of Carbon Nanofibers with PBT
Mago G, Kalyon DM, Fisher FT |
| 1320 - 1328 |
Effect of Dynamic Shear on the Microcellular Foaming of Polypropylene/High-Density Polyethylene Blends
Zhang P, Wang XJ, Yang Y, Zhou NQ |
| 1329 - 1338 |
Preparation and Properties of Flame Retardant Poly(urethane-imide)s Containing Phosphine Oxide Moiety
Ozarslan O, Bayazit MK, Catiker E |
| 1339 - 1347 |
Synthetic Tannins Structure by MALDI-TOF Mass Spectroscopy
Giovando S, Pizzi A, Pasch H, Rode K |
| 1348 - 1355 |
Improving the Performance of Urea-Formaldehyde Wood Adhesive System Using Dendritic Poly(amidoamine)s and their Corresponding Half Generations
Essawy HA, Moustafa AAB, Elsayed NH |
