| 925 - 925 |
Fibers in Polymer-Based Materials
Tonzani S |
| 926 - 933 |
Preparation of Porous Nanofibers from Electrospun Polyacrylonitrile/Calcium Carbonate Composite Nanofibers Using Porogen Leaching Technique
Mehraban M, Zadhoush A, Ravandi SAH, Bagheri R, Tehrani AH |
| 934 - 940 |
Preparation and Characterization of a Novel Strong-Base Anion Exchange Fiber
Wang J, Lv XH, Zhao L, Sha BF, Zhao D, Zhu CS |
| 941 - 950 |
Prediction of Residual Stresses and Distortion in Carbon Fiber-Epoxy Composite Parts Due to Curing Process Using Finite Element Analysis
Tavakol B, Roozbehjavan P, Ahmed A, Das R, Joven R, Koushyar H, Rodriguez A, Minaie B |
| 951 - 957 |
Orientation of Carbon Fiber Precursors from 1-Butyl-3-Metylimidazoluim Chloride Cellulose Solutions
Sammons RJ, Collier JR, Rials TG, Spruiell JE, Petrovan S |
| 958 - 969 |
Morphology, Microstructure, and Electrical Properties of Poly((D,L)-lactic acid)/Carbon Nanocapsule Composite Nanofibers
Chien HS, Wang C |
| 970 - 975 |
Layer-by-Layer Structured Gelatin Nanofiber Membranes with Photoinduced Antibacterial Functions
Lu A, Ma ZC, Zhuo JY, Sun G, Zhang GD |
| 976 - 982 |
Thermal, Mechanical, and Morphological Properties of Maleated Polypropylene Compatibilized Borassus Fruit Fiber/Polypropylene Composites
Sudhakara P, Devi APK, Prasad CV, Reddy KO, Woo LD, Kim BS, Song JI |
| 983 - 989 |
Pyrolyzed Chicken Feather Fibers for Biobased Composite Reinforcement
Senoz E, Stanzione JF, Reno KH, Wool RP, Miller MEN |
| 990 - 996 |
Investigation on Some Matrix-Dominated Properties of Hybrid Multiscale Composites Based on Carbon Fiber/Carbon Nanotube Modified Epoxy
Wang BC, Zhou X, Yin JS, Wang L |
| 997 - 1003 |
Thermal Expansivity of Chicken Feather Fiber Reinforced Epoxy Composites
Zhan MJ, Wool RP |
| 1004 - 1010 |
Crystal Polymorphism and Enhanced Dielectric Performance of Composite Nanofibers of Poly(vinylidene fluoride) with Silver Nanoparticles
Shi NE, Duan JJ, Su J, Huang FZ, Xue W, Zheng C, Qian Y, Chen SF, Xie LH, Huang W |
| 1011 - 1019 |
Electrical and Mechanical Properties of the Potassium Permanganate Treated Short Sisal Fiber Reinforced Epoxy Composite in Correlation to the Macromolecular Structure of the Reinforced Fiber
Patra A, Bisoyi DK, Manda PK, Singh AK |
| 1020 - 1029 |
Influence of Chemical Treatment on the Properties of Banana Stem Fiber and Banana Stem Fiber/Coir Hybrid Fiber Reinforced Maleic Anhydride Grafted Polypropylene/Low-Density Polyethylene Composites
Khan GMA, Shams MSA, Kabir MR, Gafur MA, Terano M, Alam MS |
| 1030 - 1035 |
Facile Fabrication of Conductive Ultrahigh Molecular Weight Polyethylene Fibers via Mussel-Inspired Deposition
Hu WW, Zeng ZX, Wang ZB, Liu CY, Wu XD, Gu Q |
| 1036 - 1043 |
Effects of Vinyl Isocyanate Coupling Agent on the Tensile Properties of Kraft Fiber-Unsaturated Polyester Composites
Gao ZH, Ma DY, Lv XY, Zhang YH |
| 1044 - 1053 |
Composite Fibers from Poly(vinyl alcohol) and Poly(vinyl alcohol)-Functionalized Multiwalled Carbon Nanotubes
Fu CF, Gu LX |
| 1054 - 1060 |
Effect of Take-Up Speed on Polyvinylidene Fluoride Hollow Fiber Membrane in a Thermally Induced Phase Separation Process
Li XF, Liu HY, Xiao CF, Ma SH, Zhao XH |
| 1061 - 1069 |
The Electrospun Polyamide 6 Nanofiber Membranes Used as High Efficiency Filter Materials: Filtration Potential, Thermal Treatment, and Their Continuous Production
Yin GB, Zhao Q, Zhao YH, Yuan Y, Yang YM |
| 1070 - 1080 |
Statistical Characterization of the Impact Strengths of Vapor-Grown Carbon Nanofiber/Vinyl Ester Nanocomposites Using a Central Composite Design
Torres GW, Nouranian S, Lacy TE, Toghiani H, Pittman CU, DuBien JL |
| 1081 - 1088 |
Preparation and Characterization of Electrospun Antheraea pernyi Silk Fibroin Nanofibers from Aqueous Solution
He JX, Cheng YM, Cui SZ |
| 1089 - 1094 |
Improving Filtration Performance of Electrospun Nanofiber Mats by a Bimodal Method
Mei Y, Wang ZM, Li XS |
| 1095 - 1100 |
Preparation and Characterization of TiO2 Nanofibers via Using Polylactic Acid as Template
Liu MZ, Cheng ZQ, Yan JT, Qiang LH, Ru X, Liu F, Ding DW, Li JF |
| 1101 - 1109 |
Investigation of Vegetable-Oil-Based Coupling Agents for Kenaf-Fiber-Reinforced Unsaturated Polyester Composites
Ren XF, Li KC |
| 1110 - 1116 |
Effects of Novel Thermotropic Liquid Crystalline Polyester with Aryl-Ether Linkages on the Processability and Properties of Poly(ether ether ketone)s Fibers
Wu T, Liu PQ, Wang X, Zeng LX, Ye GD, Xu JJ |
| 1117 - 1124 |
Effect of Fiber Surface Treatment of Poultry Feather Fibers on the Properties of Their Polymer Matrix Composites
Huda MS, Schmidt WF, Misra M, Drzal LT |
| 1125 - 1130 |
Modification and Characterization of Polyacrylonitrile Fiber by Chelating Ligand for Preconcentration and Determination of Neodymium Ion in Biological and Environmental Samples
Sadeghi HB, Panahi HA, Abdouss M, Esmaiilpour B, Nezhati MN, Moniri E, Azizi Z |
| 1131 - 1142 |
Comparative Phototransformation of Environmental Pollutants Using Metallophthalocyanines Supported on Electrospun Polymer Fibers
Zugle R, Nyokong T |
| 1143 - 1151 |
Structural Characterization and Investigation of Selected Properties of Hybrid Yarn Coated with Carbon Nanotube Composite Nanofibers
Bateni F, Ravandi SAH, Valipouri A |
| 1152 - 1157 |
Nanostructures and Surface Nanomechanical Properties of Polyacrylonitrile/Graphene Oxide Composite Nanofibers by Electrospinning
Wang QQ, Du YZ, Feng Q, Huang FL, Lu KY, Liu JY, Wei QF |
| 1158 - 1163 |
Development of Nanofiber-Reinforced Hydrogel Scaffolds for Nucleus Pulposus Regeneration by a Combination of Electrospinning and Spraying Technique
Thorvaldsson A, Silva-Correia J, Oliveira JM, Reis RL, Gatenholm P, Walkenstrom P |
| 1164 - 1169 |
Electrically Conductive Adhesive Based on Bismaleimide-Triazine Resin Filled with Microcoiled Carbon Fibers
Wu GL, Kou KC, Li N, Shi HL, Chao M |
| 1170 - 1175 |
Mechanical and Morphological Properties of Waste Eurycoma longifolia Fiber/Montmorillonite Reinforced Poly(vinyl chloride) Hybrid Composites
Hamid Y, Abu Bakar A, Deirram N |
| 1176 - 1184 |
Copolymerizing Behavior and Processability of Benzoxazine/Epoxy Systems and Their Applications for Glass Fiber Composite Laminates
Xu MZ, Yang XL, Zhao R, Liu XB |
| 1185 - 1192 |
Tensile Properties and Weibull Modulus of Some High-Performance Polymeric Fibers
Naito K |
| 1193 - 1199 |
Preparation, Structure, and Properties of Chitosan/Cellulose/Multiwalled Carbon Nanotube Composite Membranes and Fibers
Xiao WJ, Wu TH, Peng JJ, Bai Y, Li JY, Lai GQ, Wu Y, Dai LZ |
| 1200 - 1205 |
Size Effects of Cellulose Nanofibers for Enhancing the Crystallization of Poly(lactic acid)
Kose R, Kondo T |
| 1206 - 1212 |
Utilization of Cellulosic Wastes in Textile and Garment Industries. I. Synthesis and Grafting Characterization of Carboxymethyl Cellulose from Knitted Rag
Alam ABMF, Mondal MIH |
| 1213 - 1218 |
Kenaf Fiber/Soy Protein Based Biocomposites Modified with Poly(carboxylic acid) Resin
Liang KW, Gao Q, Shi SQ |
| 1219 - 1226 |
Multifunctional and Durable Nanofiber-Fabric-Layered Composite for Protective Application
Shi Q, Vitchuli N, Nowak J, Jiang S, Caldwell JM, Breidt F, Bourham M, Zhang XW, McCord M |
| 1227 - 1238 |
Lignocellulosic Fiber Reinforced Composites: Influence of Compounding Conditions on Defibrization and Mechanical Properties
Beaugrand J, Berzin F |
| 1239 - 1249 |
Enhancement of Oxidative Stabilization of Viscose Rayon Fibers Impregnated with Ammonium Sulfate Prior to Carbonization and Activation Steps
Karacan I, Soy T |
| 1250 - 1256 |
Properties of Recycled and Virgin Poly(ethylene terephthalate) Blend Fibers
Lee JH, Lim KS, Hahm WG, Kim SH |
| 1257 - 1265 |
Extrusion-Based Differences in Two Types of Nylon 6 Capillary-Channeled Polymer (C-CP) Fiber Stationary Phases as Applied to the Separation of Proteins via Ion Exchange Chromatography
Schadock-Hewitt AJ, Pittman JJ, Stevens KA, Marcus RK |
| 1266 - 1273 |
Development and Characterization of New AR Glass Fiber-Reinforced Cements with Potential Medical Applications
Furtos G, Tomoaia-Cotisel M, Baldea B, Prejmerean C |
| 1274 - 1281 |
Synthesis and Characterization of Novel Ultrathin Polyimide Fibers via Sol-Gel Process and Electrospinning
Schramm C, Rinderer B, Tessadri R |
| 1282 - 1290 |
Morphological Diversity and Nanofiber Networks of Poly(p-oxybenzoyl) Generated by Phase Separation During Copolymerization
Ichimori T, Mizuma K, Uchida T, Yamazaki S, Kimura K |
| 1291 - 1296 |
Hydrothermal Aging Mechanisms of Aramid Fibers via Synchrotron Small-Angle X-ray Scattering and Dynamic Thermal Mechanical Analysis
Li CS, Zhan MS, Huang XC, Zhou H, Li Y |
| 1297 - 1303 |
Composite Porous Membrane for Protecting High-Performance Fibers from Ultraviolet-Visible Radiation
Hassanin AH, Said MA, Seyam AFM |
| 1304 - 1312 |
Synthesis and Characterization of Clay/Polyaniline Nanofiber Hybrids
Wang BX, Yin YC, Liu CJ, Yu SS, Chen KZ |
| 1313 - 1325 |
Performance of Surface-Modified Poly(ether imide) Hollow-Fiber Membranes in a Membrane Gas-Liquid Contacting Process with Response Surface Methodology
Bakeri G, Rana D, Ismail AF, Matsuura T, Ghaee A |
