| 97 - 109 |
A novel way of enhancing the electrical and thermal stability of conductive epoxy resin-carbon black composites via the joule heating effect for heating-element applications
El-Tantawy F, Kamada K, Ohnabe H |
| 110 - 120 |
Mahua-oil-based resins for the high-temperature curing of fly ash coatings
Tiwari S, Saxena M, Tiwari SK |
| 121 - 137 |
Some new operational modes and parameters of stress relaxation for the viscoelastic characterization of solid polymers. I. The "virtual modulus" mode
Kytopoulos VN, Bourkas GD, Sideridis E |
| 138 - 148 |
Some new operational modes and parameters of stress relaxation for the viscoelastic characterization of solid polymers. II. The "vertical-shift" mode and intrinsic "time-strain clock"
Kytopoulos VN, Bourkas GD, Sideridis E |
| 149 - 158 |
Some new operational modes and parameters of stress relaxation for the viscoelastic characterization of solid polymers. III. The area ratio mode and the intrinsic "strain-clock" function
Kytopoulos VN, Bourkas GD, Sideridis E |
| 159 - 167 |
Effect of serum components on styrene/butyl acrylate latex film formation: An in situ examination by ultramicroscopy
Keslarek AJ, Galembeck F |
| 168 - 173 |
Photopolymerizable hyperbranched (meth)acrylated poly(amine ester)
Wei HY, Kou HG, Shi WF, Nie KM, Zhan YC |
| 174 - 181 |
Studies on membrane formation mechanism by the light transmission technique. I
Hao JH, Wang SC |
| 182 - 191 |
Solvent-free radiation-curable polyacrylate pressure-sensitive adhesive systems
Czech Z, Milker R |
| 192 - 198 |
Hydrosoluble copolymers of acrylamide-(2-acrylamido-2-methylpropanesulfonic acid). Synthesis and characterization by spectroscopy and viscometry
Rosa F, Bordado J, Casquilho M |
| 199 - 204 |
Pyrolysis GC-MS of chlorinated natural rubber
Yang D, Li SD, Fu WW, Zhong JP, Jia DM |
| 205 - 213 |
Environmental factors and kinetics of microbial degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in an aqueous medium
Hong LW, Yu J |
| 214 - 229 |
Crystalline morphology at the interface between polyethylene-grafted glass and polyethylene
Duchet J, Gerard JF, Chapel JP, Chabert B, Brisson J |
| 230 - 243 |
Synthesis and characterization of acrylic acid-grafted hydrocarbon and fluorocarbon polymers with the simultaneous or mutual grafting technique
Horsfall JA, Lovell KV |
| 244 - 251 |
Preparation of uniform hollow polystyrene particles with large voids by a glass-membrane emulsification technique and a subsequent suspension polymerization
Ma GH, Chen AY, Su ZG, Omi S |
| 252 - 257 |
Theoretical and experimental investigation of the swelling behavior of sodium polyacrylate superabsorbent particles
Sohn O, Kim D |
| 258 - 269 |
Interfacial properties of polycarbonate/liquid-crystal polymer and polystyrene/high-impact polystyrene polymer pairs under shear deformation
Lam YC, Yue CY, Yang YX, Tam KC, Hu X |
| 270 - 279 |
Gas-phase polymerization of butadiene. Data acquisition using minireactor technology and particle modeling
Bartke M, Wartmann A, Reichert KH |
| 280 - 283 |
Preparation of heat-resistant gradient-index polymer optical fiber rods based on poly(N-isopropylmaleimide-co-methyl methacrylate)
Wang DJ, Gu CB, Chen PL, Liu SX, Zhen Z, Zhang JC, Liu XH |
| 284 - 289 |
Influence of different polyesters and their molecular weight on the textural and electrooptical behavior of polymer-dispersed liquid crystals
Kundu PP, Verma G, Raina KK |
| 290 - 299 |
Atomic force microscopy studies of admicellar polymerization polystyrene-modified amorphous silica
See CH, O'Haver J |
| 300 - 310 |
Graft polymerization of vinyl acetate onto silica
Nguyen V, Yoshida W, Cohen Y |
| 311 - 321 |
Influence of mixing cycle on the degree of mixing of calcite-filled polyethylene upon stretching
Kim KJ, Kwon S, Kim H, Kundu PP, Kim YW, Lee YK, Lee KJ, Lee BH, Choe S |
| 322 - 327 |
Preparation and properties of poly(ethylene oxide) star polymers
Peppas NA, Argade A, Bhargava S |
| 328 - 336 |
Graft copolymer-lanthanide complexes obtained by radiation grafting on polyethylene film
Choi SH, Lee KP, Sohn SH |
| 337 - 345 |
Preparation and characteristics of composites of high-crystalline cellulose with polypropylene: Effects of maleated polypropylene and cellulose content
Qiu WL, Zhang FR, Endo T, Hirotsu T |
