| 1705 - 1711 |
Electrokinetic potential of kaolinite clay in the presence of polystyrene sulfonate
Sadek FM, Mekhemer WK, Assaad FF, Mostafa BA |
| 1712 - 1719 |
Adsorption of poly (4-sodium styrene sulfonate) on kaolinite clays
Sadek OM, Mekhemer WK, Assaad FF, Mostafa BA |
| 1720 - 1727 |
Synthesis and characterization of poly(urethane-ester)s based on calcium salt of mono (hydroxybutyl)phthalate
Prasath RA, Nanjundan S, Pakula T, Klapper M |
| 1728 - 1734 |
Partitioning of anionic/nonionic polysaccharides in a segregative system of anionic polyelectrolyte mixtures in aqueous solution: Effects of polymer charge density and ionic strength of solution
Hellebust S, Blokhus AM, Nilsson S |
| 1735 - 1741 |
Synthesis of N-hydroxymethyl acrylamide with beta-methyl hydrogen itaconate and itaconic acid hydrogels: Effects of the pH, composition, and ionic strength on the swelling behavior
Jeria-Orell M, Pizarro GDC, Marambio OG, Huerta M, Geckeler KE |
| 1742 - 1747 |
Phase diagrams of blends of poly(phenylene ether), polystyrene, and diglycidyl ether of bisphenol a: Influence of the molar mass of poly(phenylene ether)
Soule ER, Fine T, Borrajo J, Williams RJJ, Pascault JP |
| 1748 - 1753 |
Waterproofing of carbon paper by plasma polymerization
Taniguchi A, Yasuda K |
| 1754 - 1758 |
Fabrication and evaluation of some mechanical and electrical properties of jute-biomass based hybrid composites
Mehta NM, Parsania PH |
| 1759 - 1764 |
Shear strength of wood to wood adhesive based on palm kernel oil
Badri KH, Ujar AH, Othman Z, Sahaldin FH |
| 1765 - 1771 |
Isothermal and nonisothermal cure kinetics of an epoxy/poly(oxypropylene)diamine/octadecylammonium modified montmorillonite system
Brnardic I, Ivankovic M, Ivankovic H, Mencer HJ |
| 1772 - 1775 |
Investigation of allyl-capped carbosilane dendrimers used as crosslinker for silicone rubber
Zhao SG, Zhou CJ, Zhang JM, Wang J, Feng SY |
| 1776 - 1784 |
Narrow-disperse or monodisperse crosslinked and functional core-shell polymer particles prepared by two-stage precipitation polymerization
Bai F, Yang XL, Huang WQ |
| 1785 - 1793 |
Factors influencing molecular weights of methylcelluloses prepared from annual plants and juvenile eucalyptus
Ye DY, Farriol X |
| 1794 - 1801 |
Synthesis and property evaluations of photocrosslinkable chitosan derivative and its photocopolymerization with poly(ethylene glycol)
Tsai BH, Lin CH, Lin JC |
| 1802 - 1808 |
Blends of modified epoxy resin and carboxyl-terminated polybutadiene. I
Shukla SK, Srivastava D |
| 1809 - 1815 |
One-pot synthesis of a few nanocomposites with poly(N-vinylcarbazole) and CdS, Ag, Pd-50-Ag-50, and Pt-50-Ru-50 nanoparticles with gamma irradiation
Kang YO, Choi SH, Gopalan A, Lee KP, Kang HD, Song YS |
| 1816 - 1823 |
Deacetylation behavior of binary blend films of cellulose acetate and various polymers
Yamashita Y, Endo T |
| 1824 - 1830 |
Preparation and properties of core [poly(styrene-n-butyl acrylate)]-shell [poly(styrene-methyl methacrylate-vinyl triethoxide silane)] structured latex particles with self-crosslinking characteristics
Guo TY, Chen X, Song MD, Zhang BH |
| 1831 - 1835 |
Local thermal degradation behavior of heterophasic polypropylene copolymers
Manabe N, Yokota Y, Nakatani H, Suzuki S, Liu BP, Terano M |
| 1836 - 1841 |
Characterization and comparison of diblock and triblock amphiphilic copolymers of poly(delta-valerolactone)
Lin WJ, Wang CL, Juang LW |
| 1842 - 1848 |
Blended graft copolymer of carboxymethyl cellulose and poly(vinyl alcohol) with banana fiber
El-Zawawy WK |
| 1849 - 1855 |
A toughened epoxy resin by silica nanoparticle reinforcement
Rosso P, Ye L, Friedrich K, Sprenger S |
| 1856 - 1863 |
Effects of ultrasonic oscillation on processing behaviors of PS, EPDM, and PS/EPDM blend
Li J, Guo SY, Liang M |
| 1864 - 1874 |
Copolymerization of two new kinds of methacrylate monomers and determination of monomer reactivity ratios
Erol I |
| 1875 - 1880 |
Structural characterization of sulfur vulcanized deproteinized natural rubber by solid-state C-13 NMR spectroscopy
Sakdapipanich JT, Kowitteerawut T, Tuampoemsab S, Kawahara S |
| 1881 - 1888 |
Preparation of a poly(3-hexylthiophene)-grafted indium tin oxide/poly(3-hexylthiopene) composite and its conductivity-temperature characteristics
Liu CJ, Oshima K, Shimomura M, Miyauchi S |
| 1889 - 1898 |
Effect of silicon dioxide on crystallization and melting behavior of polypropylene
Chen MJ, Tian GH, Zhang Y, Wan CY, Zhang YX |
| 1899 - 1904 |
Curing and post-curing luminescence in an epoxy resin
Gallot-Lavallee O, Teyssedre G, Laurent C, Robiani S, Rowe S |
| 1905 - 1913 |
Preparation, structure and properties of nitrile-butadiene rubber-organoclay nanocomposites by reactive mixing intercalation method
Liu L, Jia DM, Luo YF, Guo BC |
| 1914 - 1918 |
Xylan/polyvinyl alcohol blend and its performance as hydrogel
Tanodekaew S, Channasanon S, Uppanan P |
| 1919 - 1931 |
Self-curable aqueous polymeric dyes for printing and dyeing applications
Huang CT, Chen KN |
| 1932 - 1939 |
Study on volume ratio and plasticizer screening of free coating membranes composed of ethyl cellulose and chitosan
He W, Du YM, Fan LH |
| 1940 - 1951 |
Optimized design of multilayer barrier films incorporating a reactive layer. I. Methodology of ingress analysis
Solovyov SE, Goldman AY |
| 1952 - 1965 |
Optimized design of multilayer barrier films incorporating a reactive layer. II. Solute dynamics in two-layer films
Solovyov SE, Goldman AY |
| 1966 - 1977 |
Optimized design of multilayer barrier films incorporating a reactive layer. III. Case analysis and generalized multilayer solutions
Solovyov SE, Goldman AY |
| 1978 - 1982 |
High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler-Natta catalyst with various cocatalysts
Wang Q, Lin YZ, Zhang ZH, Liu BP, Terano M |
| 1983 - 1987 |
Predictors of glass transition in the biodegradable polylactide and poly-lactide-co-glycolide polymers
Park PIP, Jonnalagadda S |
| 1988 - 1994 |
Synthesis and characterization of poly(thiophen-3-yl acetic acid 4-pyrrol-1-yl phenyl ester-co-N-methylpyrrole) and its application in an electrochromic device
Bingol B, Camurlu P, Toppare L |
| 1995 - 2001 |
Thermotropic behavior of lithocholic acid derivative linked hydroxyethyl cellulose
Shaikh VAE, Maldar NN, Lonikar SV, Rajan CR, Ponrathnam S |
| 2002 - 2009 |
Three-dimensional solubility parameters of poly(epsilon-caprolactone)
Huang JC, Lin KT, Deanin RD |
| 2010 - 2019 |
Thermally initiated cationic polymerization and properties of epoxy siloxane
Morita Y, Tajima S, Suzuki H, Sugino H |
| 2020 - 2029 |
Modifications of the rigid polyurethane-polyisocyanurate foams
Czuprynski B, Paciorek-Sadowska J, Liszkowska J |
| 2030 - 2039 |
Separation characteristics of acetic acid-water mixtures by using poly(vinyl alcohol-g-4-vinyl pyridine) membranes by pervaporation and temperature difference evapomeation techniques
Asman G, Sanli O |
| 2040 - 2052 |
Thermoplastic elastomeric nanocomposites from poly[styrene-(ethylene-co-butylene)-styrene] triblock copolymer and clay: Preparation and characterization
Ganguly A, De Sarkar M, Bhowmick AK |
| 2053 - 2061 |
Preparation and properties of polyimide/silica hybrid composites based on polymer-modified colloidal silica
Im JS, Lee JH, An SK, Song KW, Jo NJ, Lee JO, Yoshinaga K |
| 2062 - 2066 |
Effect of thermal shock on interlaminar strength of thermally aged glass fiber-reinforced epoxy composites
Ray BC |
| 2067 - 2074 |
Two-dimensional simulation of hollow fiber membrane fabricated by phase inversion method
Yang XT, Xu ZL, Wei YM |
| 2075 - 2084 |
Mass transfer of dilute 1,2-dimethoxyethane aqueous solutions during pervaporation process
Liang L, Dickson JM, Jiang JX, Brook MA |
| 2085 - 2095 |
Distribution of calcium carbonate and silicone elastomer in a flame retardant system based on ethylene-acrylate copolymer, chalk and silicone elastomer and its effect on flame retardant properties
Hermansson A, Hjertberg T, Sultan BA |
| 2096 - 2103 |
Preparation and characterization of nanocomposite hydrogels based on polyacrylamide for enhanced oil recovery applications
Zolfaghari R, Katbab AA, Nabavizadeh J, Tabasi RY, Nejad MH |
| 2104 - 2110 |
Effects of annealing on morphology of polymer/polymer (PS/PMMA) blend; a fluorescence study
Ugur A, Pekcan O |
| 2111 - 2121 |
Thermal stability of polyhydroxyalkanoates
Carrasco F, Dionisi D, Martinelli A, Majone M |
| 2122 - 2125 |
Gas permeation resistance of a perfluoroalkoxy-tetrafluoroethylene copolymer
Extrand CW, Monson L |
| 2126 - 2130 |
Curing kinetics and structural changes of a of Di[(N-m-acetenylphenyl) phthalimidel Ether/[(Methyl) diphenylacetylene] silane copolymer
Dai ZL, Chen Q, Ni LZ, Song N, Zhang WK |
| 2131 - 2141 |
Preparation of poly (4-methyl-1-pentene) asymmetric or microporous hollow-fiber membranes by melt-spun and cold-stretch method
Wang JL, Xu ZK, Xu YY |
| 2142 - 2150 |
Study of sulfonic acid esters from 1 -> 4-, 1 -> 3-, and 1 -> 6-linked polysaccharides
Koschella A, Leermann T, Brackhagen M, Heinze T |
| 2151 - 2157 |
Novel blue-light-emitting polymers based on a diphenylanthracene moiety
Kim YH, Kwon SK |
| 2158 - 2163 |
Miscibility and thermooxidative degradation of poly(vinyl chloride)/biodegradable aliphatic-aromatic covolvester blends
Andricic B, Kovacic T, Klaric I |
| 2164 - 2170 |
Synthesis and characterization of soluble hybrids of poly(vinyl pyrrolidone) or its copolymer
Huang KS, Lee EC, Chang YS |
| 2171 - 2179 |
Properties of epoxy molding compound according to the pretreatment method of an amino-silane coupling agent on epoxy or phenol resin
Lee JH, Yoon HC |
| 2180 - 2188 |
Environmentally friendly plasticizers for poly(vinyl chloride) -Improved mechanical properties and compatibility by using branched poly(butylene adipate) as a polymeric plasticizer
Lindstrom A, Hakkarainen M |
| 2189 - 2195 |
Simulation method for complex permittivities of carbon black/epoxy composites at microwave frequency band
Kim JB, Kim TW, Kim CG |
| 2196 - 2202 |
Thermal conductivity of ramie fiber drawn in water in low temperature
Yamanaka A, Abe S, Tsutsumi M, Kitagawa T, Fujishiro H, Ema K, Izumi Y, Nishijima S |
| 2203 - 2209 |
Polymerization of ethyl acrylate using hyperbranched polyglycerol with multi-RAFT groups as chain transfer agent
Huang J, Wan DC, Huang JL |
| 2210 - 2219 |
Chemistry of thermal ageing in aerospace epoxy composites
Bondzic S, Hodgkin J, Krstina J, Mardel J |
| 2220 - 2226 |
Comparative study of propylene polymerization using monosupported and bisupported titanium-based Ziegler-Natta catalysts
Zohuri GH, Jamjah R, Ahmadjo S |
| 2227 - 2237 |
Prediction of properties of rubber by using artificial neural networks
Vijayabaskar V, Gupta R, Chakrabarti PP, Bhowmick AK |
| 2238 - 2243 |
Fundamental studies of homogeneous cation exchange membranes from poly(2,6-dimethyl-1,4-phenylene oxide): Membranes prepared by simultaneous aryl-sulfonation and aryl-bromination
Yu H, Xu TW |
| 2244 - 2247 |
Microwave-irradiated ring-opening polymerization of D,L-lactide under atmosphere
Jing S, Peng W, Tong Z, Zhao BX |
| 2248 - 2251 |
Composite anion exchange membrane for alkaline direct methanol fuel cell: Structural and electrochemical characterization
Huang AB, Xia CY, Xiao CB, Zhuang L |
| 2252 - 2258 |
Synthesis and characterization of negative-type polyamic acid ester with 1-methacryloyloxy-2-propanoate group
Choi SM, Kwon SH, Yi MH |
| 2259 - 2266 |
Postspinning draw of polymeric fibers: Multiscale micromechanical model for a solid polymer under finite deformation and strain-induced crystallization
Makradi A, Cox CL, Ahzi S, Belouettar S |
| 2267 - 2277 |
Film formation from pigmented latex systems: Drying kinetics and bulk morphologies of ground calcium carbonate/functionalized poly(n-butyl methacrylate-co-n-butyl acrylate) blend films
Ding TH, Daniels ES, El-Aasser MS, Klein A |
| 2278 - 2288 |
Determination of sorption kinetic parameters using the relaxation-dependent solubility model in the methanol vapor-poly(methyl methacrylate) system
Dimos V, Sanopoulou M |
| 2289 - 2292 |
Loading rate effects on mechanical properties of polymer composites at ultralow temperatures
Ray BC |
| 2293 - 2302 |
The effect of different metallic catalysts on the coreaction of cyanate/epoxy
Li QF, Lu K, Yang QQ, Jin RG |
| 2303 - 2316 |
Study of morphology influence on rheological properties of compatibilized TPU/SAN blends
Ulcnik-Krump M |
| 2317 - 2322 |
Ultraviolet curable dry polymer films from emulsion polymers
Chee SY, Gan SN |
| 2323 - 2330 |
Effect of reaction parameters on the particle sizes of crosslinked spherical phenolic beads by suspension polymerization of phenol and formaldehyde
Singh A, Lal D |
| 2331 - 2335 |
Effects of molecular weights of bioabsorbable poly(p-dioxanone) on its crystallization behaviors
Yang KK, Wang XL, Wang YZ, Huang HX |
| 2336 - 2342 |
Synthesis and characterization of photo-crosslinkable polyfluorene with acrylate side-chains
Wu GL, Yang CH, Fan BH, Zhang B, Chen XM, Li YF |
| 2343 - 2347 |
Chemically induced graft copolymerization of vinyl monomers onto cotton fibers
Pulat M, Isakoca C |
| 2348 - 2355 |
Viscoelastic behavior of thermosetting epoxy mixtures modified with syndiotactic polystyrene during network formation
Tercjak A, Serrano E, Rerniro PM, Mondragon I |
| 2356 - 2361 |
Poly (N-methylaniline)/multi-walled carbon nanotube composites-synthesis, characterization, and electrical properties
Lu XF, Zheng JN, Chao DM, Chen JY, Zhang WJ, Wei Y |
| 2362 - 2370 |
Immobilization of a functionalized poly(ethylene glycol) onto beta-cyclodextrin-coated surfaces by formation of inclusion complexes: Application to the coupling of proteins
Guerrouache M, Karakasyan C, Gaillet C, Canva M, Millot MC |
| 2371 - 2379 |
Preparation and properties of biodegradable thermoplastic starch/poly(hydroxy butyrate) blends
Lai SM, Don TM, Huang YC |
| 2380 - 2385 |
Synthesis and properties of styrene copolymers. Preparation of film-modified electrodes to detect Pb2+ ions
Rivas BL, Pooley SA, Brovelli F, Pereira E, Basaez L, Puentes J, Moutet JC, Saint-Aman E |
| 2386 - 2392 |
Heat-resistant hydrophobic-oleophobic coatings
Uyanik M, Arpac E, Schmidt H, Akarsu M, Sayilkan F, Sayilkan H |
| 2393 - 2401 |
Thermal and surface characterization of polyurethane-urea clay nanocomposite coatings
Sreedhar B, Chattopadhyay DK, Swapna V |
| 2402 - 2408 |
Preparation and characterization of polyvinyl alcohol based biomaterials: Water sorption and in vitro blood compatibility study
Mishra S, Bajpai R, Katare R, Bajpai AK |
| 2409 - 2414 |
Preparation of polystyrene/poly(vinyl acetate) nanocomposites with a core-shell structure via emulsifier-free emulsion polymerization
Soltan-Dehghan M, Sharifi-Sanjani N, Naderi N |
| 2415 - 2421 |
Solution and solid-state blend compatibility of poly(vinyl alcohol) and poly(methyl methacrylate)
Adoor SG, Manjeshwar LS, Rao KSVK, Naidu BVK, Aminabhavi TM |
| 2422 - 2435 |
Viscosity behavior of hydroxylated and acetoacetylated polyesters
Narayan R, Chattopadhyay DK, Raju KVSN, Mallikarjuna NN, Jawalkar SS, Aminabhavi TM |
| 2436 - 2442 |
Preparation of novel fluorinated block copolyimide membranes for gas separation
Niwa M, Nagaoka S, Kawakami H |
| 2443 - 2454 |
Effect of rubber reactivity on the morphology of polybenzoxazine blends investigated by atomic force microscopy and dynamic mechanical analysis
Lee YH, Allen DJ, Ishida H |
| 2455 - 2463 |
Synthesis of copolymers of tert-butyl vinyl ether with maleic and citraconic anhydrides
Denizli BK, Can HK, Rzaev ZMO, Guner A |
| 2464 - 2479 |
Supramolecular magnetorheological polymer gels
Hu B, Fuchs A, Huseyin S, Gordaninejad F, Evrensel C |
| 2480 - 2489 |
Synthesis and characterization of graft copolymer (guar gum-g-N-vinyl-2-pyrrolidone) and investigation of metal ion sorption and swelling behavior
Srivastava A, Behari K |
| 2490 - 2496 |
A water-soluble acrylate/sulfonate copolymer. I. Its synthesis and dispersing ability on cement
Ye YS, Huang HL, Hsu KC |
| 2497 - 2503 |
Preparation of nanometer-sized poly(methacrylic acid) particles in water-in-oil microemulsions
Zhang QY, Bao XJ, Lin M, Hourston DJ |
| 2504 - 2510 |
Production of agrochemical from waste polyesters
Goje AS, Shinde PH, Mishra S |
| 2511 - 2515 |
Hydrosilylation reaction of methylhydridesiloxane to phenylacetylene
Mukbaniani O, Tatrishvili T, Titvinidze G, Mukbaniani N, Lezhava L, Gogesashvili N |
| 2516 - 2520 |
The characterization of alginate wound dressings with different fiber and textile structures
Qin YM |
| 2521 - 2531 |
Environmental durability of banana-fiber-reinforced phenol formaldehyde composites
Joseph S, Oommen Z, Thomas S |
| 2532 - 2541 |
Optimizing multiple qualities in As-spun polypropylene yarn by neural networks and genetic algorithms
Huang CC, Tang TT |
| 2542 - 2548 |
Improving the physical and chemical functionality of starch-derived films with biopolymers
Ban WP, JianguoSong, Argyropous DS, Lucia LA |
| 2549 - 2553 |
Structure and adhesion properties of linear low-density polyethylene powders grafted with acrylic acid via ultraviolet light
Lei JX, Gao J, Jiang LB |
| 2554 - 2560 |
Properties of starch-based blend films using citric acid as additive. II
Yoon SD, Chough SH, Park HR |
| 2561 - 2564 |
Studies in the utilization of agricultural waste products as filler in natural rubber compounds
Okieimen FE, Imanah JE |
