| 1377 - 1380 |
Instant modification of graphite nanosheets by the grafting of a styrene oligomer under microwave radiation
Li JP, Lin HF, Zhao WF, Chen GH |
| 1381 - 1387 |
Thermal reproducibility and voltage stability of carbon black/multiwalled carbon nanotube and carbon black/SnO2-Sb coated titanium dioxide filled silicone rubber heaters
Kim GT, Park ES |
| 1388 - 1394 |
In situ microwave-assisted polymerization of polyethylene terephtalate in layered double hydroxides
Martinez-Gallegos S, Herrero M, Rives V |
| 1395 - 1402 |
Morphology and mechanical properties of natural rubber and styrene-grafted natural rubber latex compounds
Arayapranee W, Rempel GL |
| 1403 - 1419 |
Modeling of the particle size distribution in emulsion polymerization
Sood A |
| 1420 - 1430 |
Air-hole properties of calcite-filled polypropylene copolymer films
Biswas J, Kim H, Lee BH, Choe S |
| 1431 - 1438 |
An improvement on water absorbing and permeating properties: Heparin immobilizing on acrylic acid-grafted and collagen/chitosan-immobilized wound dressing
Wang CC, Chen CC, Chen FL, Lin NS |
| 1439 - 1446 |
Mechanical properties and water sorption behavior of phenol-formaldehyde hybrid composites reinforced with banana fiber and glass fiber
Joseph S, Sreekala MS, Koshy P, Thomas S |
| 1447 - 1453 |
Irradiation-induced grafting of polyacrylamide onto the sulphonated poly(2,6-dimethyl-1,4-phenylene oxide) (SPPO) films as well as its use as catalytical layer in a bipolar membrane
Chen GW, Xu TW, Liu JS |
| 1454 - 1460 |
Synthesis and characterization of emulsion polymerized mixed matrix aluminum silicate/poly(2,6-dimethyl 1,4-phenylene oxide) films
Sadeghi F, Tremblay AY, Kruczek B |
| 1461 - 1466 |
Hydrogel characteristics of a novel temperature-sensitive polymer, poly(N-2-methoxyisopropylacrylamide)
Solener M |
| 1467 - 1475 |
Augmenting the performance of acrylonitrile-butadiene-styrene plastics for low-noise dynamic applications
Ganguly A, Saha S, Bhowmick AK, Chattopadhyay S |
| 1476 - 1479 |
Maghnite-H+, a solid catalyst for the cationic polymerization of alpha-methylstyrene
Moulkheir A, Harrane A, Belbachir M |
| 1480 - 1483 |
Polymeric thermal actuation using laminates based on polymer-clay nanocomposites
Chen BQ, Liu S, Evans JRG |
| 1484 - 1491 |
A comparative study of short nylon fiber-natural rubber composites prepared from dry rubber and latex masterbatch
Bipinbal PK, Kutty SKN |
| 1492 - 1497 |
Epoxy-clay nanocomposites: Influence of the clay surface modification on structure
Ryznarova B, Zelenka J, Lednicky F, Baldrian J |
| 1498 - 1504 |
Effect of solvent composition on transparency and surface hardness of poly(methyl methacrylate)-silica nanocomposites provided on polycarbonate
Saito R, Kobayashi SI, Hayashi H, Shimo T |
| 1505 - 1514 |
Mechanical and thermal properties of polycarbonate, part 1: Influence of free quenching
Rouabah F, Fois M, Ibos L, Boudenne A, Picard C, Dadache D, Haddaoui N |
| 1515 - 1523 |
Melting behavior, isothermal and nonisothermal crystallization kinetics of PP/mLLDPE blends
Qin JL, Guo SQ, Li ZT |
| 1524 - 1528 |
Porous honeycomb films prepared from poly(phthalazionone ether sulfone ketone) (PPESK) by self-organization method
Zhang YQ, Tian Y, Wang LH |
| 1529 - 1534 |
Highly active ethylene/hydroxyl comonomers copolymerization using metallocene catalysts
Exposito MT, Vega JF, Ramos J, Osio-Barcina J, Garcia-Martinez A, Martin C, Martinez-Salazar J |
| 1535 - 1546 |
Solvent resistance and mechanical properties in thermoplastic elastomer blends prepared by dynamic vulcanization
Van Dyke JD, Gnatowski M, Burczyk A |
| 1547 - 1555 |
Mechanical and water sorption studies of ecofriendly banana fiber-reinforced polyester composites fabricated by RTM
Sreekumar PA, Albert P, Unnikrishnan G, Joseph K, Thomas S |
| 1556 - 1563 |
Influence of blending sequence on micro- and macrostructure of PA6/mEPDM/EPDMgMA blends reinforced with organoclay
Gallego R, Garcia-Lopez D, Lopez-Quintana S, Gobernado-Mitre I, Merino JC, Pastor JM |
| 1564 - 1569 |
Entanglement network and relaxation temperature dependence of single-site catalyzed ethylene/1-hexene copolymers
Vega JF, Martin S, Exposito MT, Martinez-Salazar J |
| 1570 - 1576 |
Low potential electrodeposition of high-quality and freestanding poly(3-(6-bromohexyl)thiophene) films
Xu JK, Wei ZH, Du YK, Pu SZ, Hou J, Zhou WQ |
| 1577 - 1584 |
Preparation of insoluble fibroin/collagen films without methanol treatment and the increase of its flexibility and cytocompatibility
Lv Q, Hu K, Feng QL, Cui FZ |
| 1585 - 1593 |
Effect of viscosity of shell solution on the content of solid powder as core material in microencapsulation by the drying-in-liquid method
Yokoyama H, Mo L, Taguchi Y, Tanaka M |
| 1594 - 1603 |
Artificial aging and deterioration of oil-painted Fabriano paper and cardboard paper supports
Elfeky OM, Hassan ML |
| 1604 - 1610 |
Study of monodispersed polystyrene colloidal particles containing fluorine
Liu CS, Li J |
| 1611 - 1617 |
Preparation and physical properties of transparent organic-inorganic nanohybrid materials based on urethane dimethacrylate
Daimatsu K, Sugimoto H, Nakanishi E, Yasumura T, Inomata K |
| 1618 - 1624 |
Blends of high density polyethylene with branched poly(styrene-co-dodecyl acrylate): Rheological, mechanical, and thermal properties
Ren Q, Gong FH, Zhang DL, Shi XX, Fang JB, Jiang BB |
| 1625 - 1634 |
"Ex Situ" concept for toughening the RTMable BMI matrix composites, part I: Improving the interlaminar fracture toughness
Cheng QF, Fang ZP, Yi XS, An XF, Tang BM, Xu YH |
| 1635 - 1642 |
Miscibility, crystallization, and mechanical properties of poly(3-hydroxybutyrate) and poly(propylene carbonate) biodegradable blends
Yang DZ, Hu P |
| 1643 - 1653 |
Electropolymerization kinetics of a binary mixture of pyrrole and o-aminobenzoic acid and characterization of the obtained polymer films
Sayyah SM, Ei-Rabiey MM, El-Rehim SSA, Azooz RE |
| 1654 - 1660 |
Mechanical properties and morphologies of polypropylene composites synergistically filled by styrene-butadiene rubber and silica nanoparticles
Wang WZ, Liu TX |
| 1661 - 1666 |
Investigation of sorption and diffusion of supercritical carbon dioxide in polycarbonate
Zhao JJ, Zhao YP, Yang B |
| 1667 - 1674 |
Characterization of polymer-brush-type polysaccharide beta-ketoesters
Yoshida Y, Isogai A |
| 1675 - 1683 |
XPS and EXAFS characterization of Ziegler-Natta catalyst systems
da Silva AA, Alves MDM, dos Santos JHZ |
| 1684 - 1691 |
Hybrid composite based on poly(vinyl alcohol) and fillers from renewable resources
Cinelli P, Chiellini E, Imam SH |
| 1692 - 1698 |
Preparation and characterization of polymer-based spherical activated carbons with tailored pore structure
Zhu ZL, Li AM, Zhong S, Liu FQ, Zhang QX |
| 1699 - 1707 |
Effect of graft modification with poly(N-vinylpyrrolidone) on thermal and mechanical properties of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)
Wang W, Zhang Y, Zhu MF, Chen YM |
| 1708 - 1713 |
Polyurethane foams with 1,3-pyrimidine ring
Chmiel-Szukiewicz E |
| 1714 - 1721 |
Crystallization behavior and spherulite growth rate of isotactic polypropylene in isotactic polypropylene/natural rubber based thermoplastic elastomers
Joseph A, Koch T, Seidler S, Thomas S, Joseph K |
| 1722 - 1729 |
Synthesis of 3',4'-disubstituted terthiophenes - Characterization and electropolymerization. II. 3'-bromo-4'-thienyl-2,2': 5',2'-terthiophene and 3',4'-diphenyl-2,2': 5',2'-terthiophene in photovoltaic displays
Velez JH, Diaz FR, del Valle MA, Bernede JC, Soto JP |
| 1730 - 1737 |
Comparative studies for the effect of dual- and mono-organic modifiers on the physical properties of polyimide-clay nanocomposite membranes
Lai MC, Jang GW, Chang KC, Hsu SC, Hsieh MF, Yeh JM |
| 1738 - 1745 |
Preparation and characterization of a methyl methacrylate/ethyl acrylate/acrylic acid terpolymer to improve the homogeneity of ethylene-propylene-diene monomer rubber/poly(vinyl chloride) blends
Botros SH, Moustafa AF, Mansour SH |
| 1746 - 1756 |
A novel process to develop modified polymeric surfaces for the analysis of bacterial adhesion: Surface properties and adhesion test
Anjum N, Bellon-Fontaine MN, Herry JM, Riquet AM |
| 1757 - 1763 |
Properties of reactive hot melt polyurethane adhesives with acrylic polymer or macromonomer modifications
Jung JS, Kim JH, Kim MS, Jeong HM, Kim YS, Kim TK, Hwang JM, Lee SY, Cho YL |
| 1764 - 1771 |
Influence of pH on the specific surface area of polyaniline matrices
Chowdhury AN, Saleh FS, Rahman MR, Rahim A |
| 1772 - 1780 |
Preparation of unsaturated poly(epsilon-caprolactone) with a new titanium alkoxide initiator
Xia ZA, Zerroukhi A, Chalamet Y, Chen JD |
| 1781 - 1792 |
Synthesis and viscosity of hydrophobically modified polymers containing dendritic segments
Ali SA, Umar Y, Al-Muallem HA, Abu-Sharkh BF |
| 1793 - 1801 |
Effect of water on Bombyx mori regenerated silk fibers and its application in modifying their mechanical properties
Plaza GR, Corsini P, Perez-Rigueiro J, Marsano E, Guinea GV, Elices M |
| 1802 - 1807 |
Dendrimer-encapsulated Pt nanoparticles/polyaniline nanofibers for glucose detection
Xu LH, Zhu YH, Tang LH, Yang XL, Li CZ |
| 1808 - 1813 |
Cationic copolymerization of epoxy siloxane monomer with liquid poly-butadiene and its light emitting diode encapsulation
Morita Y, Tajima S, Suzuki H, Sugino H |
| 1814 - 1822 |
Preparation and characterization of poly(methyl methacrylate) beads
Holmes RL, Burford RP, Bertram CD |
| 1823 - 1828 |
Preparation and characterization of fluorescent polymer magnetic particles
Baharvand H |
| 1829 - 1839 |
Using COC as pharmaceutical or cosmetic storage material. II. Effect of electron beam radio-sterilization
Saunier J, Chodur CA, Leclerc B, Larbes L, Yagoubi N |
| 1840 - 1849 |
Synthesis and thermomechanical characterization of polyurethane elastomers extended with alpha,omega-alkane diols
Zia KM, Barikani M, Bhatti IA, Zuber M, Bhatti HN |
| 1850 - 1860 |
Electrokinetic and rheological behaviors of sepiolite suspensions in the presence of poly(acrylic acid sodium salt)s, polyacrylamides, and poly(ethylene glycol)s of different molecular weights
Tunc S, Duman O, Uysal R |
| 1861 - 1870 |
Synthesis and characterization of thermally stable polymers (polybenzimidazoles)
Ozaytekin I, Karatas I |
| 1871 - 1880 |
PPgMA/APTS compound coupling compatabilizer in PP/clay hybrid nanocomposite
Liaw WC, Huang PC, Chen CS, Lo CL, Chang JL |
| 1881 - 1889 |
Synthesis and characterization of biodegradable poly(butylene succinate-co-propylene succinate)s
Xu YX, Xu J, Liu DH, Guo BH, Xie XM |
| 1890 - 1899 |
Study of degradation of organic coatings in seawater by using EIS and AFM methods
Zhang F, Liu JJ, Li XY, Gu M |
| 1900 - 1910 |
Rate transitions in the fatigue crack growth of elastomers
Papadopoulos IC, Thomas AG, Busfield JJC |
| 1911 - 1915 |
Novel waterborne polyurethanes containing short fluoroalkyl chains: Synthesis and applications on cotton fabrics
Zhu MJ, Qing FL, Meng WD |
| 1916 - 1924 |
Effect of glycol and filler types on some polymeric composite properties
Asaad JN, Abd-El-Messieh SL |
| 1925 - 1934 |
The role of rubber characteristics in preparing rubber/clay nanocomposites by melt compounding
Ma Y, Wu YP, Zhang LQ, Li QF |
| 1935 - 1943 |
Flame retardancy of hollow glass microsphere/rigid polyurethane foams in the presence of expandable graphite
Bian XC, Tang JH, Li ZM |
| 1944 - 1949 |
Effects of coagulation processes on properties of epoxidized natural rubber
Zeng ZQ, Yu HP, Wang QF, Guang L |
| 1950 - 1954 |
Antifoaming performance of polysiloxanes modified with fluoroalkyls and polyethers
Wu F, Cai C, Yi WB, Cao ZP, Wang Y |
| 1955 - 1961 |
Prevaration and evaluation of two kinds of solid polymer electrolytes made from crosslinked poly(ether urethane) elastomers consisting of a comb-like and a hyperbranched polyether
Ye L, Gao P, Zhao YM, Feng ZG, Bai Y, Wu F |
| 1962 - 1967 |
The influence of 4HB content on the properties of poly(3-hydroxylbutyrate-co-4-hydroxylbutyrate) based on melt molded sheets
Cong CB, Zhang SY, Xu RW, Lu WC, Yu DS |
| 1968 - 1973 |
Synthesis, extraction, and adsorption properties of calix[4]arene-poly(ethylene-glycol) crosslinked polymer
Zhu WP, Gou PF, Zhu K, Shen ZQ |
| 1974 - 1981 |
Honeybee corpses as an available source of chitin
Draczynski Z |
| 1982 - 1992 |
Studies on preparation and properties of porous biodegradable poly(NIPAAm) hydrogels
Lee WF, Cheng TS |
| 1993 - 1999 |
The properties of polyolefins modified with PET powder
Jakubowska P, Sterzynski T, Krolikowski B |
| 2000 - 2007 |
Morphological, electrical, and mechanical properties of multiwall carbon nanotube/polysilsesquioxane composite
Yuen SM, Ma CCM |
| 2008 - 2015 |
Characterization of an alkali-treated grass fiber by thermogravimetric and x-ray crystallographic analysis
De D, De D |
| 2016 - 2022 |
Effects of molding pressure on the warpage and the viscoelasticities of HVQFN packages
Gui DY, Ernst LJ, Jansen KMB, Yang DG, Goumans L, Bressers HJL, Janssen JHJ |
| 2023 - 2028 |
Cure behavior of epoxy-cyanate ester blend in composite systems: Evaluation studies in neat resin cast by thermal and FTIR techniques
Sekhar KR, Kishore, Sankaran S |
| 2029 - 2042 |
Miscible polyisoprene/polybutadiene blends: Relationship between average statistical segment length and vinyl content
Ambler MR |
| 2043 - 2053 |
Pervaporation dehydration of isopropyl alcohol with NaY zeolite incorvorated hybrid membranes
Kulkarni SS, Kittur AA, Kariduraganavar MY, Davis FJ |
| 2054 - 2063 |
Electromagnetic interference shielding effectiveness of graphite-filled polypropylene and poly(ether imide) based composites
Sawai P, Banerjee S |
