| 1757 - 1763 |
Synthesis and characterization of novel polyimides containing triazoles units in the main chain by click chemistry
Hajipour AR, Abrishami F |
| 1764 - 1770 |
Synthesis and characterization of LDHs/PMMA nanocomposites: Effect of two different intercalated anions on the mechanical and thermal properties
Nogueira T, Botan R, Wypych F, Lona L |
| 1771 - 1777 |
Improved transfection efficiency of chitosan-DNA complexes employing reverse transfection
Nimesh S, Saxena A, Kumar A, Chandra R |
| 1778 - 1784 |
Protective effect of cashew gum nanoparticles on natural larvicide from Moringa oleifera seeds
Paula HCB, Rodrigues MLL, Ribeiro WLC, Stadler AS, Paula RCM, Abreu FOMS |
| 1785 - 1795 |
Copolymerizations of tetrafluoroethylene and perfluoropropylvinyl ether in supercritical carbon dioxide: Polymer synthesis, characterization, and thermal properties
Xu AH, Yuan WZ, Zhao JH, Li H, Zhang H, Zhang YM |
| 1796 - 1807 |
Characterization of soybean protein concentrate-stearic acid/palmitic acid blend edible films
de la Caba K, Pena C, Ciannamea EM, Stefani PM, Mondragon I, Ruseckaite RA |
| 1808 - 1814 |
Temperature and time dependence of electrical resistivity in an anisotropically conductive polymer composite with in situ conductive microfibrils
Zhang YC, Dai K, Pang H, Luo QJ, Li ZM, Zhang WQ |
| 1815 - 1823 |
Quantitative analysis of interfacial tension effect on the impact strength of organic flame retardants and acrylonitrile-butadiene-styrene blends
Jia LN, Li B, Shi BL, Zhang HJ, Lan YQ, Zhang X, Wang Y, Wang LL |
| 1824 - 1830 |
Dispersion of nanoparticles in poly(vinyl chloride) grains during In situ polymerization
Georgiadou S, Jin LL, Thomas NL, Gilbert M, Brooks BW |
| 1831 - 1839 |
Wood flour/polylactide biocomposites toughened with polyhydroxyalkanoates
Qiang T, Yu DM, Gao HH |
| 1840 - 1847 |
Synthesis and characterization of saccharide-functionalized polymer-gemcitabine conjugates based on chemoenzymatic selective strategy
Zhou GJ, Li X, Teng MX, Chu GH, Lin XF |
| 1848 - 1857 |
Flame retardant mechanisms of phosphorus-containing polyhedral oligomeric silsesquioxane (DOPO-POSS) in polycarbonate composites
Zhang WC, Li XM, Yang RJ |
| 1858 - 1865 |
Selective sorption of Fe(III) using modified forms of chitosan beads
Gandhi MR, Kousalya GN, Meenakshi S |
| 1866 - 1879 |
The effect of synthesis condition on physical properties of epoxy-containing microcapsules
Wang RG, Hu HL, Liu WB, He XD, Guo Q |
| 1880 - 1890 |
Alteration of the mechanical and thermal properties of nylon 6/nylon 6,6 blends by nanoclay
Jarrar R, Mohsin MA, Haik Y |
| 1891 - 1898 |
Chemically induced graft copolymerization of acrylonitrile onto lignocellulosic fibers
Singha AS, Rana RK |
| 1899 - 1905 |
Cure kinetics, glass transition temperature development, and dielectric spectroscopy of a low temperature cure epoxy/amine system
Dimopoulos A, Skordos AA, Partridge IK |
| 1906 - 1911 |
Preparation of TiO2 epoxy nanocomposites by ultrasonic dispersion and resulting properties
Bittmann B, Haupert F, Schlarb AK |
| 1912 - 1918 |
Electroless silver plating on the PET fabrics modified with 3-mercaptopropyltriethoxysilane
Li LL, Yu D, Wang L, Wang W |
| 1919 - 1928 |
Drug release from electrospun fibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) grafted with poly(N-vinylpyrrolidone)
Wang W, Cao J, Lan P, Wu W |
| 1929 - 1937 |
Effect of TiO2 on thermal and adhesive characteristics of poly(imide siloxane)/TiO2 hybrid films
Ko CJ, Tseng IH, Whang WT, Tsai MH |
| 1938 - 1946 |
Artificial ageing of wood finishes monitored by IR analysis and color measurements
Irmouli Y, George B, Merlin A |
| 1947 - 1955 |
Synthesis and characterization of pH-sensitive crosslinked (NIPA-co-AAC) nanohydrogels copolymer
Elsaeed SM, Farag RK, Maysour NS |
| 1956 - 1966 |
Poly(ether imide)s containing cyano substituents and thin films made from them
Bacosca I, Hamciuc E, Cristea M, Lisa G, Bruma M |
| 1967 - 1975 |
Dynamic mechanical behavior of vinylester matrix composites reinforced by Luffa cylindrica modified fibers
Botaro VR, Novack KM, Siqueira EJ |
| 1976 - 1980 |
Synthesis, characterization, and thermal analysis of two polymeric chromium ternary complexes with nitrilotriacetic acid and alanine or glycine
Ismail EH, Souaya ER, Mohamed AA |
| 1981 - 1992 |
Synthesis of new sulfonated copolyimides in organic and ionic liquid media for fuel cell application
Akbarian-Feizi L, Mehdipour-Ataei S, Yeganeh H |
| 1993 - 1998 |
Degradation behaviors of linear low-density polyethylene and poly(L-lactic acid) blends
Singh G, Kaur N, Bhunia H, Bajpai PK, Mandal UK |
| 1999 - 2006 |
Effect of the compatibility on the morphology and properties of acrylonitrile-butadiene rubber/polypropylene thermoplastic vulcanizates
Tian M, Han JB, Wu HG, Tian HC, She QY, Chen WQ, Zhang LQ |
| 2007 - 2015 |
Aromatic amine-epoxidized sunflower free-fatty-acid adducts as corrosion inhibitors in epoxy-curable varnishes
Mohamed HA, Ibrahim MS, Kandil NG, Said HM, Mohamed IM |
| 2016 - 2021 |
Investigation of the rheological behavior of titanium dioxide pigmented acrylonitrile-butadiene-styrene polymer
Taghinejad SF, Behrouzi M, Asiaban S |
| 2022 - 2029 |
Polysilazane-based heat- and oxidation-resistant coatings on carbon fibers
Shayed MA, Hund RD, Cherif C |
| 2030 - 2036 |
Pilocarpine-loaded poly(DL-lactic-co-glycolic acid) nanoparticles as potential candidates for controlled drug delivery with enhanced ocular pharmacological response
Nair KL, Vidyanand S, James J, Kumar GSV |
| 2037 - 2047 |
Synthesis, characterization, and swelling behavior evaluation of hydrogels based on Gum ghatti and acrylamide for selective absorption of saline from different petroleum fraction-saline emulsions
Kaith BS, Jindal R, Mittal H, Kumar K |
| 2048 - 2054 |
Synthesis and application of MDPE-g-GMA as reactive compatibilizer in blends of MDPE/PET and MDPE/PA6
Daneshvar M, Masoomi M |
| 2055 - 2061 |
A novel polymer chemodosimeter for the detection of mercury ions: Synthesis and fluorescence "turn-on" responses of fluorene-based conjugated polymer with reactive pendent N,N-diethyl-2-(4-phenoxy)-thioacetamide
Huang WJ, Wu WH |
| 2062 - 2070 |
Ultrasonic properties and morphology of devulcanized rubber blends
Zhu SH, Penlidis A, Tzoganakis C, Ginzel E |
| 2071 - 2079 |
Intumescent flame retardant TPO composites: Flame retardant properties and morphology of the charred layer
Wang X, Feng N, Chang SQ, Zhang GX, Li H, Lv H |
| 2080 - 2086 |
Fabrication and characterization of silk fibroin/poly(ethylene glycol)/cellulose nanowhisker composite films
Li RJ, Zhang YH, Zhu LJ, Yao JM |
| 2087 - 2099 |
Poly(vinyl chloride) hollow-fiber membranes for ultrafiltration applications: Effects of the internal coagulant composition
Alsalhy QF, Rashid KT, Noori WA, Simone S, Figoli A, Drioli E |
| 2100 - 2109 |
Combined XPS and contact angle studies of flat and rough ethylene-vinyl acetate copolymer films
Doganci MD, Cansoy CE, Ucar IO, Erbil HY, Mielczarski E, Mielczarski JA |
| 2110 - 2117 |
Zirconium nano building blocks based on the 3-butynoic acid ligand: Synthesis and thermomechanical studies of the resulting inorganic-organic hybrid material
Maggini S, Girardi F, Muller K, Di Maggio R |
| 2118 - 2126 |
Synthesis and characterization of N- and O-alkylated poly[aniline-co-N-(2-hydroxyethyl) aniline]
Shadi L, Gheybi H, Entezami AA, Safa KD |
| 2127 - 2132 |
Chemical interaction between carbon fibers and surface sizing
Dai ZS, Zhang BY, Shi FH, Li M, Zhang ZG, Gu YZ |
| 2133 - 2143 |
Injection-molded high-density polyethylene-hydroxyapatite-aluminum oxide hybrid composites for hard-tissue replacement: Mechanical, biological, and protein adsorption behavior
Tripathi G, Basu B |
| 2144 - 2153 |
Effect of curing temperature on properties and solvent welding strength of ovalbumin
Lin YC, Chang ZC, Lin CB, Shen CC, Su YL |
| 2154 - 2170 |
Carboxybetaine, sulfobetaine, and cationic block copolymer coatings: A comparison of the surface properties and antibiofouling behavior
Wu L, Jasinski J, Krishnan S |
| 2171 - 2178 |
Synthesis and anticoagulant activity of pectin sulfates
Fan LH, Gao S, Wang LB, Wu PH, Cao M, Zheng H, Xie WG, Zhou JP |
| 2179 - 2186 |
Synthesis of crosslinked polyacrylonitrile via atom transfer radical polymerization with activators regenerated by electron transfer and use of the resin in mercury removal after modification
Zong GX, Ma J, Chen H, Wang CH, Ji NY, Liu DL |
| 2187 - 2199 |
Fractional thermoelectric viscoelastic materials
Ezzat MA, El-Karamany AS |
| 2200 - 2208 |
Electro-optical properties of polymer-dispersed liquid crystal prepared by controlled graft living radical polymerization
Qin AL, Zhang YL, Wang YH |
| 2209 - 2215 |
Atom transfer radical copolymerization of glycidyl methacrylate and methyl methacrylate
Neugebauer D, Bury K, Wlazlo M |
| 2216 - 2226 |
Crystallization kinetics of poly (L-lactic acid)/montmorillonite nanocomposites under isothermal crystallization condition
Hwang JJ, Huang SM, Liu HJ, Chu HC, Lin LH, Chung CS |
| 2227 - 2233 |
LiClO4 salt concentration effect on the properties of PVC-modified low molecular weight LENR50-based solid polymer electrolyte
Rahman MYA, Ahmad A, Lee TK, Farina Y, Dahlan HM |
| 2234 - 2239 |
DMA analysis of the damping of ethylene-vinyl acetate/acrylonitrile butadiene rubber blends
Shi XY, Bi WN, Zhao SG |
| 2240 - 2249 |
Thermal aging on mechanical properties and crosslinked network of natural rubber/zinc Dimethacrylate composites
Xu CH, Chen YK, Huang J, Zeng XR, Ding JP |
| 2250 - 2268 |
Synthesis of full and semi Interpenetrating hydrogel from polyvinyl alcohol and poly (acrylic acid-co-hydroxyethylmethacrylate) copolymer: Study of swelling behavior, network parameters, and dye uptake properties
Mandal B, Ray SK, Bhattacharyya R |
| 2269 - 2277 |
Tensile modulus modeling of carbon black/polycarbonate, carbon nanotube/polycarbonate, and exfoliated graphite nanoplatelet/polycarbonate composites
Via MD, King JA, Keith JM, Miskioglu I, Cieslinski MJ, Anderson JJ, Bogucki GR |
| 2278 - 2286 |
Synthesis of clay-dispersed poly(styrene-co-methyl methacrylate) nanocomposite via miniemulsion atom transfer radical polymerization: A reverse approach
Khezri K, Haddadi-Asl V, Roghani-Mamaqani H, Salami-Kalajahi M |
| 2287 - 2299 |
Novel surface modifying macromolecules (SMMs) blended polysulfone gas separation membranes by phase inversion technique
Savoji H, Rana D, Matsuura T, Soltanieh M, Tabe S |
| 2300 - 2310 |
Influence of novel surface modifying macromolecules and coagulation media on the gas permeation properties of different polymeric gas separation membranes
Savoji H, Rana D, Matsuura T, Soltanieh M, Tabe S |
| 2311 - 2317 |
Production of melamine fortified urea-formaldehyde resins with low formaldehyde emission
Paiva NT, Henriques A, Cruz P, Ferra JM, Carvalho LH, Magalhaes FD |
| 2318 - 2324 |
Effects of an amphoteric copolymer on the properties of cementitious materials
Sheen YN, Ho CD, Weng WH, Hsu KC |
| 2325 - 2332 |
Effect of reactive poly(ethylene glycol) flexible chains on curing kinetics and impact properties of bisphenol-a glycidyl ether epoxy
Yao D, Kuila T, Sun KB, Kim NH, Lee JH |
| 2333 - 2339 |
Fabrication of porous polylactic acid films assisted by dip-coating and template leaching techniques
Yang TI, Su TL, Lin PL, Tseng IH, Chang CH, Fang HW |
| 2340 - 2347 |
Mechanistic study on carboxymethyl hydroxyethyl cellulose as fluid loss control additive in oil well cement
Bulichen D, Plank J |
| 2348 - 2361 |
Synthesis and characterization of novel poly(acrylamide-co-acrylic acid-co-2-hydroxy ethyl actylate) hydrogels: Mathematical approach in investigation of swelling kinetics and diffusion models
Awasthi S, Singhal R |
| 2362 - 2369 |
Solvent-free diazotization-azidation of aryl amine using a polymer-supported azide ion
Zarchi MAK, Nabaei R |
| 2370 - 2376 |
Effect of phenol functionalization of carbon nanotubes on properties of natural rubber nanocomposites
Thomas PS, Abdullateef AA, Al-Harthi MA, Basfar AA, Bandyopadhyay S, Atieh MA, De SK |
| 2377 - 2382 |
Synthesis of poly(N-isopropylacrylamide) under atmospheric pressure plasma conditions
Spridon D, Curecheriu L, Dobromir M, Dumitrascu N |
| 2383 - 2394 |
Processing and properties of syntactic foams reinforced with carbon nanotubes
Guzman ME, Rodriguez AJ, Minaie B, Violette M |
| 2395 - 2402 |
Mixtures of poly(vinyl chloride) and copolyesters based on e-caprolactone and L-lactide: Miscibility, thermal stability, and weathering resistance
Brozek J, Zidkova M, Malinova L, Kalouskova R |
| 2403 - 2414 |
Mesua ferrea L. seed oil based amido-amine modified nanoclay/epoxy nanocomposites
Das G, Karak N |
| 2415 - 2422 |
Synthesis of a novel benzoxazine-containing benzoxazole structure and its high performance thermoset
Yang P, Gu Y |
| 2423 - 2429 |
Effect of the compatibilizer on the morphology and properties of dynamically cured PP/POE/epoxy blends
Jiang XL, Fan YH |
| 2430 - 2440 |
Use of purified and modified bentonites in linear low-density polyethylene/organoclay/compatibilizer nanocomposites
Seyidoglu T, Yilmazer U |
| 2441 - 2448 |
Determination of formaldehyde/urea molar ratio in amino resins by near-infrared spectroscopy
Henriques A, Cruz P, Martins J, Ferra JM, Magalhaes FD, Carvalho LH |
| 2449 - 2462 |
Modification of poly(propylene) by grafted polyester-amide-based dendritic nanostructures with the aim of improving its dyeability
Sari MG, Moradian S, Bastani S, Stribeck N |
| 2463 - 2472 |
Characterization and antioxidative properties of condensed tannins from the mangrove plant Aegiceras corniculatum
Wei SD, Lin YM, Liao MM, Zhou HC, Li YY |
| 2473 - 2484 |
Effect of silane treatment on physicochemical properties of lignocellulosic C. indica fiber
Singha AS, Rana AK |
| 2485 - 2493 |
Process behavior of compatible polymer blends
Navarro R, Lopez J, Parres F, Ferrandiz S |
| 2494 - 2500 |
Effect of hybridization and compatibilization on the mechanical properties of recycled polypropylene-hemp composites
Kakroodi AR, Leduc S, Rodrigue D |
| 2501 - 2507 |
Antifungal properties of chitosan salts in laboratory media
Ren JM, Liu JL, Li RC, Dong F, Guo ZY |
| 2508 - 2512 |
A novel method for the synthesis of polyhydrazide and polythiohydrazide from urea and thiourea
Abdolmaleki A |
| 2513 - 2523 |
Electrospun vascular graft properties following femtosecond laser ablation
Lee CH, Lim YC, Powell HM, Farson DF, Lannutti JJ |
| 2524 - 2536 |
Puncture deformation and fracture mechanism of oriented polymers
Yang Y, Ponting M, Thompson G, Hiltner A, Baer E |
| 2537 - 2540 |
Ring-opening polymerization of cyclohexene oxide by recyclable scandium triflate in room temperature ionic liquid
Ling J, You LX, Wang YF, Shen ZQ |
| 2541 - 2549 |
Effect of carbon nanotubes on dynamic mechanical properties, TGA, and crystalline structure of polypropylene
Razavi-Nouri M |
| 2550 - 2557 |
Characterization of the curing process of vinyl plastisols with epoxidized linseed oil as a natural-based plasticizer
Fenollar O, Garcia-Sanoguera D, Sanchez-Nacher L, Lopez J, Balart R |
| 2558 - 2566 |
Optical and electrical characterization of (PEO plus methyl violet) polymer electrolytes
Kilarkaje S, Manjunatha V, Devendrappa H |
| 2567 - 2581 |
Effective properties of particle reinforced polymeric mould material towards reducing cooling time in soft tooling process
Nandi AK, Datta S, Orkus J |
| 2582 - 2593 |
Some metal compounds in the phase of crosslinked ionic polymeruprecursors for new sorbents and catalysts
Gutsanu V, Cojocaru L, Lisa G, Volodina GF |
| 2594 - 2600 |
Electrospinning of poly(vinyl alcohol) and poly(4-styrenesulfonic acid) for fuel cell applications
Martwiset S, Jaroensuk K |
| 2601 - 2609 |
Effect of the polymer microstructure on the behavior of syndiotactic polypropylene/organophilic layered silicate composites
Palza H, Zurita A |
| 2610 - 2614 |
Sulphonated poly ether ether ketone/amino-diphenylsilandiol composite electrolyte for PEM fuel cells
Ahmed Z, Belitto S, Di Vona ML, Trombetta M, Traversa E, Licoccia S |
| 2615 - 2624 |
Synthesis and properties of trifluoromethyl groups containing epoxy resins cured with amine for low Dk materials
Wang JY, Yang SY, Huang YL, Tien HW, Chin WK, Ma CCM, Shu WJ |
| 2625 - 2631 |
Tuning of electrochromic properties by copolymerization of monoalkoxythiophenes and dialkoxythiophenes
Tu SJ, Wang YC, Lan JW, Zheng QK, Wei J, Chen S |
| 2632 - 2639 |
Extruded/injection-molded composites containing unripe plantain flour, ethylene-vinyl alcohol, and glycerol: Evaluation of mechanical property, storage conditions, biodegradability, and color
Vargas A, Berrios JD, Chiou BS, Wood D, Bello LA, Glenn GM, Imam SH |
