| 579 - 588 |
Dark reactions of free radicals crosslinked polymer networks trapped in densely after photopolymerization
Pavlinec J, Moszner N |
| 589 - 595 |
Boiling water aging of polycarbonate and polycarbonate/acrylonitrile-butadiene-styrene resin and polycarbonate/low-density polyester blends
Li CQ, Zhang Y, Zhang YX |
| 596 - 600 |
Butadiene polymerization in the presence of VOCl3-dialkylmagnesium catalytic system
Monakov YB, Mullagaliev IR, Kharitonova EY |
| 601 - 603 |
Structure of active centers, their stereospecificity distribution, and multiplicity in diene polymerization initiated by NdCl3-based catalytic systems
Urazbaev VN, Efimov VP, Sabirov ZM, Monakov YB |
| 604 - 611 |
Fiber spinning from poly(propylene)-organoclay nanocomposite
Pavlikova S, Thomann R, Reichert P, Mulhaupt R, Marcincin A, Borsig E |
| 612 - 619 |
Isothermal and nonisothermal transition kinetics of trans-1,4-polybutadiene
Cai JL, Bo SQ, Li G, Zhou EL, Cheng RS |
| 620 - 629 |
Use of zinc-neutralized ethylene/methacrylic acid copolymer ionomers as blend compatibilizers for nylon 6 and low-density polyethylene
Leewajanakul P, Pattanaolarn R, Ellis JW, Nithitanakul M, Grady BP |
| 630 - 637 |
Homogeneous graft copolymerization of acrylonitrile onto high alpha-cellulose in a dimethyl acetamide and lithium chloride solvent system
Das P, Saikia CN |
| 638 - 644 |
Preparation of metal-containing protein fibers and their antimicrobial properties
Tsukada M, Arai T, Colonna GM, Boschi A, Freddi G |
| 645 - 654 |
Using an electronic microbalance technique to study the stick-slip behavior of lubricated polypropylene fibers
Behary N, Campagne C, Caze C, Perwuelz A |
| 655 - 661 |
Study on the mechanical and dielectric properties of photocured jute fabrics with 2-hydroxyethyl methacrylate
Khan MA, Das LR, Khan AH, Ahmed F, Rahman SMB |
| 662 - 667 |
Preparation of photoluminescence films containing rare earth complexes by UV photograft polymerization
Li JY, Sun YM, Zeng H, Xue WX, Xiao Y, Yu Q |
| 668 - 673 |
Studies on epoxidized rubber seed oil as plasticizer for acrylonitrile butadiene rubber
Joseph R, Alex R, Vinod VS, Premalatha CK, Kuriakose B |
| 674 - 685 |
The nature of the organoaluminum compound and the kinetic heterogeneity of active sites in lanthanide-based diene polymerization
Sigaeva NN, Usmanov TS, Zaikov GE, Monakov YB |
| 686 - 690 |
Stress-induced crystallization of biaxially oriented polypropylene
Yang W, Li ZM, Xie BH, Feng JM, Shi W, Yang MB |
| 691 - 696 |
Synthesis and properties of novel aromatic polyamides derived from 2,2-bis[4-(4-amino-2-fluorophenoxy) phenyl]hexafluoropropane and aromatic dicarboxylic acids
Gutch PK, Banerjee S, Jaiswal DK |
| 697 - 705 |
A lattice-fluid, group-contribution treatment of the glass transition of homopolymers, copolymers, and polymer solutions
Hamedi M, Danner RP, Duda JL |
| 706 - 710 |
Production of polystyrene/poly(ethylene glycol dimethacrylate) composite particles encapsulating hinokitiol
Okubo M, Minami H, Jing Y |
| 711 - 717 |
Polyamide-6-b-polybutadiene block copolymers: Synthesis and properties
Petrov P, Jankova K, Mateva R |
| 718 - 727 |
Synthesis and characterization of amphiphilic hydroxypropylcellulose-graft-poly(epsilon-caprolactone)
Shi RW, Burt HM |
| 728 - 733 |
Miscibility behavior and coil overlap in ionic blends of phenylated polytriphenylene oxide and poly(methyl methacrylate)
Rajagopalan M, Natansohn A, Eisenberg A, Tannenbaum R |
| 734 - 741 |
Structural insights into a novel molecular-scale composite of soluble poly(vinyl pyrrolidone) supporting uniformly dispersed nanoscale poly(vinyl pyrrolidone) particles
Hood DK, Senak L, Kopolow SL, Tallon MA, Kwak YT, Patel D, McKittrick J |
| 742 - 752 |
Formation of microcapsules of medicines by the rapid expansion of a supercritical solution with a nonsolvent
Matsuyama K, Mishima K, Hayashi KI, Ishikawa H, Matsuyama H, Harada T |
| 753 - 762 |
Mechanochemical improvement of the flame-retardant and mechanical properties of zinc borate and zinc borate - Aluminum trihydrate-filled poly(vinyl chloride)
Pi H, Guo SY, Ning Y |
| 763 - 768 |
Separation of superoxide dismutase by size-exclusion chromatography column packed with regenerated cellulose gels
Yang G, Xiong XP, Zhang L |
| 769 - 778 |
Effect of carbon black on the mechanical and dielectric properties of rubber ferrite composites containing barium ferrite
Soloman MA, Kurian P, Anantharaman MR, Joy PA |
| 779 - 786 |
A comparative study of swelling properties of hydrogels based on poly(acrylamide-co-methyl methacrylate) containing physical and chemical crosslinks
Begam T, Nagpal AK, Singhal R |
| 787 - 790 |
Chelation ion-exchange properties of copolymer resin derived from 4-hydroxyacetophenone, oxamide, and formaldehyde
Gurnule WB, Rahangdale PK, Paliwal LJ, Kharat RB |
| 791 - 796 |
Polyimides possessing bulky phosphorus groups: Synthesis and characterization
Liu YL, Hsu CY, Wu CS |
| 797 - 805 |
Toughening of polyethylene terephthalate/amorphous copolyester blends with a maleated thermoplastic elastomer
Yu ZZ, Lei M, Ou YC, Yang GS |
| 806 - 810 |
Synthesis and characterization of sigma-pi conjugated poly(methylphenyldiethynylenesilane-co-methyltetraphenylphenylsilylene)
Li MJ, Feng SY, Xie SJ |
| 811 - 816 |
Graft modification of highly chlorinated polyethylene (HCPE) with methyl methacrylate by the mechanochemistry reaction. I. Synthesis and characterization
Zhao JR, Feng Y, Chen XF |
| 817 - 820 |
Preparation of large-sized graded-index polymer preform
Ding W, Xu CX, Xu SH, Wang ST |
| 821 - 827 |
Physical and electroresponsive characteristics of the intercalated styrene-acrylonitrile copolymer/clay nanocomposite under applied electric fields
Kim JW, Jang LW, Choi HJ, Jhon MS |
| 828 - 836 |
Grafting of itaconic acid onto LDPE by the reactive extrusion: Effect of neutralizing agents
Krivoguz YM, Pesetskii SS, Jurkowski B |
| 837 - 847 |
Rheological properties and compatibility of NR/EPDM and NR/brominated EPDM blends
Lewis C, Bunyung S, Kiatkamjornwong S |
| 848 - 854 |
Synthesis and biodegradation of starch-graft-poly(hexylene adipate)
Zhu CY, Kou XD, You YC, Zhang ZQ, Zuo J |
| 855 - 861 |
Morphological characterization of the core-shell latex particle by transmission electron microscopy and image analysis
Li ZM, Yang JH, Yu YZ, Xu XZ, Meng XT, Yu WJ, Xu XL, Li L, Yue XY |
| 862 - 866 |
Increased stability of polythiophene in the presence of aniline in acetonitrile
Ozcicek NP, Pekmez K, Holze R, Yildiz A |
| 867 - 873 |
Solid-phase microextraction (SPME) in polymer characterization - Long-term properties and quality control of polymeric materials
Hakkarainen M, Groning M, Albertsson AC |
