| 3083 - 3094 |
Role of anionic and nonionic surfactants on the control of particle size and latex colloidal stability in the seeded emulsion polymerization of butyl methacrylate
Castelvetro V, De Vita C, Giannini G, Giaiacopi S |
| 3095 - 3101 |
Synthesis of unsaturated polyphosphoester as a potential injectable tissue engineering scaffold materials
Qiu JJ, Liu CM, Hu F, Guo XD, Zheng QX |
| 3102 - 3110 |
Influence of adding mesocarbon microbeads into C/C composites on microstructure and properties during carbonization
Hu HL, Ko TH, Kuo WS, Chen ST |
| 3111 - 3117 |
Some insight into hydrolytic scission mechanisms in bioerodible polyesters
Alexis F, Venkatraman S, Rath SK, Gan LH |
| 3118 - 3122 |
Synthesis of two-end-functionalized copolymer of styrene and methyl methacrylate via living radical polymerization
Cai J, Xu L, Mao ZQ, Chen ZJ, Liu Y, Jiang XQ, Cheng RS |
| 3123 - 3126 |
Surface relief gratings on azo polymer films through reversible photoisomerization by the irradiation of a monochromatic light
Alam MZ, Ohmachi T, Ogata T, Nonaka T, Kurihara S |
| 3127 - 3133 |
Effect of miscibility and forced compatibility on damping properties of CIIR/PAc blend
Huang GS, He XR, Wu JR, Pan QY, Zhen J, Hong Z |
| 3134 - 3143 |
Effect of coal filler on the properties of soy protein plastics
Wang GH, Zhou AN, Hu MB |
| 3144 - 3148 |
Adjustable temperature sensor with double thermoresponsiveness based on the aggregation property of binary diblock copolymers
Wu K, Shi LQ, Zhang WQ, An YL, Zhu XX |
| 3149 - 3157 |
A new and simple way of preparing polycation-grafted fibrous cellulose
Roche P |
| 3158 - 3167 |
Thermal and dynamic mechanical characterization of polyurethane-urea-imide coatings
Mishra AK, Chattopadhyay DK, Sreedhar B, Raju KVSN |
| 3168 - 3180 |
Cure kinetics and rheology characterization of soy-based epoxy resin system
Liang G, Chandrashekhara K |
| 3181 - 3185 |
Study of piezo-damping properties of CPE/ZKF/VGCF composites
Ding XB, Yan X |
| 3186 - 3194 |
Characterization of mold fouling during elastomer injection molding
Hornsby PR, Singh I, Daley JR, Firth J |
| 3195 - 3200 |
Studies on blends of polychloroprene and polybutadiene rubber containing phosphorylated cardanol prepolymer: Melt rheology, cure characteristics, and mechanical properties
Menon ARR, Visconte LLY |
| 3201 - 3211 |
Development of dispersed phase size and its dependence on processing parameters
Chen X, Xu J, Guo BH |
| 3212 - 3220 |
Supercritical carbon dioxide-assisted dispersion of sodium benzoate in polypropylene and crystallization behavior of the resulting polypropylene
Li B, Hu GH, Cao GP, Liu T, Zhao L, Yuan WK |
| 3221 - 3232 |
Accelerated aging versus realistic aging in aerospace composite materials. II. Chemistry of thermal aging in a structural composite
Dao B, Hodgkin J, Krstina J, Mardel J, Tian W |
| 3233 - 3239 |
Copolymerization of n-butylacrylate with styrene by a novel photoinitiator, 1-(bromoacetyl)pyrene
Mishra A, Daswal S |
| 3240 - 3245 |
Use of radiation grafting of polyethylene-coated polypropylene nonwoven fabric by acrylamide for the removal of heavy metal ions from wastewaters
Ibrahim AM, El-Salmawi KM, El-Naggar AA |
| 3246 - 3254 |
Structure and mechanical properties of poly(trimethylene terephthalate)/poly(hydroxy ether of bisphenol A) blends
Gonzalez I, Eguiazabal JI, Nazabal J |
| 3255 - 3258 |
Degradation of chitosan and chemically modified chitosan by viscosity measurements
Agnihotri SA, Kulkarni VD, Kulkarni AR, Aminabhavi TM |
| 3259 - 3265 |
Effect of compatibilizer and silane coupling agent on physical properties of ethylene vinyl acetate copolymer/ethylene-1-butene copolymer/clay nanocomposite foams
Kim DW, Park KW, Chowdhury SR, Kim GH |
| 3266 - 3272 |
Barrier properties for short-fiber-reinforced epoxy foams
Alonso MV, Auad ML, Sorathia U, Marcovich NE, Nutt SR |
| 3273 - 3276 |
Red emission from Eu3+: PVA polymer film
Raju GSR, Buddhudu S, Rajulu AV |
| 3277 - 3285 |
Preparation and characterization of organoclay-rubber nanocomposites via a new route with skim natural rubber latex
Alex R, Nah C |
| 3286 - 3292 |
Structural modification and characterization of lignosulfonate by a reaction in an alkaline medium for its incorporation into phenolic resins
El Mansouri NE, Farriol X, Salvado J |
| 3293 - 3300 |
Electrical conductivity modeling of carbon-filled liquid-crystalline polymer composites
Keith JM, King JA, Barton RL |
| 3301 - 3305 |
Humidity sensitivity of polypyrrole and polypyrrole/SBA-15 host-guest composite materials
Geng WC, Li XT, Li N, Zhang T, Wang W, Qiu SL |
| 3306 - 3315 |
Interfacial, dynamic mechanical, and thermal fiber reinforced behavior of MAPE treated sisal fiber reinforced HDPE composites
Mohanty S, Nayak SK |
| 3316 - 3326 |
Fully aliphatic polyimides from adamantane-based diamines for enhanced thermal stability, solubility, transparency, and low dielectric constant
Mathews AS, Kim I, Ha CS |
| 3327 - 3333 |
Synthesis, characterization, and antimicrobial properties of oligo-4-[(pyridine-3-yl-methylene) amino] phenol
Kaya I, Bilici A, Sacak M |
| 3334 - 3340 |
Synthesis and characterization of butyl acrylate graft sodium salt of partially carboxymethylated starch
Patel VM, Parikh DN, Patel JV, Pandya PD |
| 3341 - 3344 |
A new modified silicone-TiO2 polymer composite film and its photocatalytic degradation
Lin LH, Lee HT |
| 3345 - 3353 |
Corn oil-based composites reinforced with continuous glass fibers: Fabrication and properties
Lu YS, Larock RC |
| 3354 - 3368 |
Mechanical and dielectric relaxation phenomena of poly(ethylene-2,6-napthalene dicarboxylate) by fractional calculus approach
Reyes-Melo ME, Martinez-Vega JJ, Guerrero-Salazar CA, Ortiz-Mendez U |
| 3369 - 3375 |
Studies of novel copolymers for deep-UV photoresists. I. Synthesis and properties of poly(styrene-co-silicon-containing maleimide)
Shu WJ |
| 3376 - 3384 |
Extrusion of microcellular open-cell LDPE-based sheet foams
Lee PC, Wang J, Park CB |
| 3385 - 3390 |
Hg(II) removal with polyacrylamide grafted crosslinked poly(vinyl chloride) beads via surface-initiated controlled/"living" radical polymerization
Liu P, Guo JS |
| 3391 - 3399 |
Very high modulus high-density polyethylene and high modulus polypropylene obtained by solid-state roll drawing
Ajji A, Dumoulin MM |
| 3400 - 3403 |
Fourier transform infrared and second derivative ultraviolet spectrometry in determining polystyrene-poly(4-methylstyrene) blend composition
Meal L |
| 3404 - 3412 |
Homo-oligomerization of maleic anhydride in nonpolar solvents: A kinetic study of deviations from nonlinear behavior
Al-Roomi YM, Hussain KF |
| 3413 - 3419 |
Synthesis and characterization of a macromolecular surface modifier for polypropylene
Chen HJ, Zhu YF, Zhang Y, Xu JR |
| 3420 - 3429 |
Synthesis and properties of ethylene/styrene copolymers produced by metallocene catalysts
Haider N, Exposito MT, Munoz-Escalona A, Ramos J, Vega JF, Mendez L, Martinez-Salazar J |
| 3430 - 3437 |
Developing protective textile materials as barriers to liquid penetration using melt-electrospinning
Lee S, Obendorf SK |
| 3438 - 3445 |
Effects of hygrothermal ageing on mechanical properties of flax pulps and their polypropylene matrix composites
Retegi A, Arbelaiz A, Alvarez P, Llano-Ponte R, Labidi J, Mondragon I |
| 3446 - 3456 |
Rheological investigation of the influence of acrylate polymers on the modification of asphalt
Iqbal MH, Hussein IA, Wahhab HIAA, Amin MB |
| 3457 - 3461 |
Synthesis and characterization of poly(aryl ether sulfone)s with metallophthalocyanine pendant unit
Zhang YH, Niu YM, Xu R, Wang GB, Jiang ZH |
| 3462 - 3470 |
Mechanical properties and release studies of chitosan films impregnated with silver sulfadiazine
Azevedo EP, Saldanha TDP, Navarro MVM, Medeiros AC, Ginani MF, Raffin FN |
| 3471 - 3479 |
Moisture diffusion properties of HFPE-II-52 polyimide
Bhargava P, Chuang KC, Chen K, Zehnder A |
| 3480 - 3488 |
Effects of nanoparticle treatment on the crystallization behavior and mechanical properties of polypropylene/calcium carbonate nanocomposites
Wan WT, Yu DM, Xie YC, Guo XS, Zhou WD, Cao JP |
| 3489 - 3494 |
Investigation on gradient dielectric characteristics of bamboo (Dendrocalamus strictus)
Chand N, Jain D, Nigrawal A |
| 3495 - 3497 |
Development of novel film using paramylon prepared from Euglena gracilis
Kawahara Y, Koganemaru A |
| 3498 - 3503 |
Preparation and surface activity of modified soy protein
Lin LH, Chen KM |
| 3504 - 3509 |
Property and reliability of liquid underfill material for IC packaging
Chiu HT, Chung JS |
| 3510 - 3516 |
Kinetics of the anionic ring-opening polymerization of octamethylcyclotetrasiloxane initiated by potassium isopropoxide
Zhang Y, Zhang ZJ, Wang Q, Xie ZM |
| 3517 - 3525 |
Environmental effects on poly-p-phenylenebenzobisoxazole fibers. I. Mechanisms of degradation
Walsh PJ, Hu X, Cunniff P, Lesser AJ |
| 3526 - 3544 |
Theoretical and experimental studies of anisotropic shrinkage in injection moldings of various polyesters
Kwon K, Isayev AI, Kim KH |
| 3545 - 3551 |
DNA delivery using low molecular water-soluble chitosan nanocomplex as a biomedical device
Choi CY, Kim DG, Jang MJ, Kim TH, Jang MK, Nah JW |
| 3552 - 3558 |
Synthesis and characterization of thermo- and pH-sensitive block copolymers bearing a biotin group at the poly(ethylene oxide) chain end
Tong DJ, Yao J, Li HR, Han SJ |
| 3559 - 3564 |
Preparation and properties of novel water-soluble surfactants. I. Synthesis and surface activity of polycarboxylated multihydrophilic surfactants
Lai CC, Chen KM |
| 3565 - 3574 |
Assessing biodegradability and mechanical, thermal, and morphological properties of an acrylic acid-modified poly(3-hydroxybutyric acid)/wood flours biocomposite
Wu CS |
| 3575 - 3579 |
Pesticides removal performance by low-pressure reverse osmosis membranes
Bhattacharya A, Ray P, Brahmbhatt H, Vyas KN, Joshi SV, Devmurari CV, Trivedi JJ |
| 3580 - 3589 |
New anion exchanger organic-inorganic hybrid materials and membranes from a copolymer of glycidylmethacrylate and gamma-methacryloxypropyl trimethoxy silane
Wu YH, Wu CM, Gong M, Xu TW |
| 3590 - 3596 |
Electrode polarization for nylon 1010 with dielectric relaxation spectroscopy
Lu HB, Zhang XY, He B, Zhang H |
| 3597 - 3609 |
Synthesis and characterization of polycarbonates by melt-phase interchange reactions with alkylene and arylene diphenyl dicarbonates
Al-Hamouz OCS, Sweileh BA, Al-Salah HA |
| 3610 - 3615 |
Bismaleimide modified bis propargyl ether bisphenol A resin: Synthesis, cure, and thermal properties
Liu F, Li WW, Wei LH, Zhao T |
| 3616 - 3627 |
Characterization of sulfonated poly(styrene-divinylbenzene) and poly(divinylbenzene) and its application as catalysts in esterification reaction
Coutinho FMB, Rezende SM, Soares BG |
| 3628 - 3633 |
Effect of clay on immiscible morphology of poly(butylene terephthalate)/polyethylene blend nanocomposites
Wu DF, Zhou CX, Zhang M |
| 3634 - 3640 |
Removal of endocrine disruptors in milk by circulation through polydimethylsiloxane tubing
Higuchi A, Takayama E, Hirai K, Ishikawa T, Takizawa N, Sakurai M, Egashira S, Matsuoka Y, Natori SH |
| 3641 - 3653 |
Synthesis and properties of fluorinated aromatic poly(amide imide)s based on 4,4'-bis(4-amino-2-trifluoromethylphenoxy)benzophenone and various bis(trimellitimide)s
Su YY, Yang CP |
| 3654 - 3663 |
Hydrogel-forming agar-graft-PVP and kappa-carrageenan-graft-PVP blends: Rapid synthesis and characterization
Prasad K, Mehta G, Meena R, Siddhanta AK |
| 3664 - 3672 |
Pseudoreinforcement effect of multiwalled carbon nanotubes in epoxy matrix composites
Zhuang GS, Sui GX, Sun ZS, Yang R |
| 3673 - 3678 |
Compression, cleavage, and shear resistance of composite construction materials produced from softwoods and hardwoods
Kilic M, Celebi G |
| 3679 - 3684 |
Synthesis of a thioether modified hyperbranched polyglycerol and its template effect on fabrication of CdS and CdSe nanoparticles
Wan DC, Fu Q, Huang JL |
| 3685 - 3690 |
Dispersion copolymerization of acrylamide with acrylic acid in an aqueous solution of ammonium sulfate: Synthesis and characterization
Liu XG, Chen DN, Yue YM, Zhang WD, Wang PX |
| 3691 - 3697 |
Superfine structure, physical properties, and dyeability of alkaline hydrolyzed poly(ethylene terephthalate)/silica nanocomposite fibers prepared by in situ polymerization
Yang YZ, Gu HC |
| 3698 - 3703 |
Mechanical and thermomechanical characterization of PVC/polyalkylacrylate blends
Chakrabarti R, Chakraborty D |
| 3704 - 3713 |
Experimental investigation of infrared rapid surface heating for injection molding
Chang PC, Hwang SJ |
| 3714 - 3719 |
Crystallization behavior of PVDF in PVDF-DMP system via thermally induced phase separation
Gu MH, Zhang J, Wang XL, Ma WZ |
| 3720 - 3731 |
Synthesis of copolymeric hydrogels using gamma radiation and their utilization in the removal of some dyes in wastwater
Abdel-Aal SE |
| 3732 - 3740 |
Kinetics of the effect of ageing on tensile properties of a natural rubber compound
Ngolemasango EF, Bennett M, Clarke J |
| 3741 - 3750 |
Synthesis and characterization of water soluble poly(N-acetyl)iminoethylene and poly(ethyleneimine) by ion-exchanged clay montmorillonite
Hachemaoui A, Yahiaoui A, Belbachir M |
| 3751 - 3763 |
Intercalation of epoxy resin in organically modified montmorillonite
Hutchinson JM, Montserrat S, Roman F, Cortes P, Campos L |
| 3764 - 3773 |
Effects of ultrasound on the synthesis and properties of polyurethane foam/clay nanocomposites
Seo WJ, Sung YT, Kim SB, Lee YB, Choe KH, Choe SH, Sung JY, Kim WN |
| 3774 - 3781 |
Cure kinetics of aqueous phenol-formaldehyde resins used for oriented strandboard manufacturing: Effect of wood flour
Lei Y, Wu QL |
| 3782 - 3790 |
Blending and characterizations of microbial poly(3-hydroxybutyrate) with dendrimers
Xu SL, Luo RC, Wu LP, Xu KT, Chen GQ |
| 3791 - 3794 |
Reswelling behavior of polycation hydrogels carrying charges on the chain backbone by two-step surfactant bindings
Chen L, Yu X, Li QY |
| 3795 - 3804 |
Synthesis, characterization, and thermal degradation of oligo-2-(morpholinoiminomethyl)phenol and its Pb(II) complex compound
Kaya I, Bilici A |
| 3805 - 3808 |
Synthesis, characterization, and properties of a linear poly(ester-amide) containing ethylene glycol lactate sequences
Xiao CM, He YY, Luo X |
| 3809 - 3818 |
Nonisothermal crystallization behavior of melt-intercalated polyethylene-clay nanocomposites
Yuan Q, Awate S, Misra RDK |
| 3819 - 3829 |
Environmental effects on poly-p-phenylenebenzobisoxazole fibers. II. Attempts at stabilization
Walsh PJ, Hu XB, Cunniff P, Lesser AJ |
| 3830 - 3841 |
Interfacial interaction, morphology, and tensile properties of a composite of highly crystalline cellulose and maleated polypropylene
Qiu WL, Endo T, Hirotsu T |
| 3842 - 3847 |
Synthesis of novel phosphorous-containing biphenol, 2-(5, 5-dimethyl-4-phenyl-2-oxy-1,3,2-dioxaphosphorin-6-yl)-1,4-benzenediol and its application as flame-retardant in epoxy
Xia XN, Lu YB, Zhou X, Xiong YQ, Zhang XH, Xu WJ |
| 3848 - 3856 |
Direct synthesis and characterization of cross-linked polysiloxanes via anionic ring-opening copolymerization with octaisobutyl-polyhedral oligomeric silsesquioxane and octamethylcyclotetrasiloxane
Li HY, Zhang JY, Xu RW, Yu DS |
| 3857 - 3861 |
Preparation and pH-sensitive swelling behavior of physically crosslinked polyampholyte gels
Zhao YB, Yang YJ, Yang XL, Xu HB |
| 3862 - 3867 |
Ecofriendly poly(vinyl alcohol) and coconut shell powder composite films: Physico-mechanical, thermal properties, and swelling studies
Ramaraj B, Poomalai P |
| 3868 - 3876 |
Thermal and mechanical properties of poly(ethylene terephthalate)/lamellar zirconium phosphate nanocomposites
Brandao LS, Mendes LC, Medeiros ME, Sirelli L, Dias ML |
| 3877 - 3888 |
Reaction-induced phase separation in poly(vinyl acetate)/polyester blend
Bulliard X, Michaud V, Manson JAE |
| 3889 - 3899 |
Preparation of polypropylene/montmorillonite nanocomposites with an exfoliated structure by a designed route
Hong HQ, He H, Jia ZX, Ding C, Jia DM |
| 3900 - 3906 |
Mechanistic study of boron trifluoride catalyzed epsilon-caprolactone polymerization in the presence of glycerol
Jiang G, Walker GS, Jones IA, Rudd CD |
| 3907 - 3911 |
Long-term water uptake behavior of lignocellulosic-high density polyethylene composites
Najafi SK, Tajvidi M, Chaharmahli M |
| 3912 - 3918 |
Synergic influence of a surfactant and ultrasonication on the preparation of soluble, conducting polydiphenylamine/silica-nanoparticle composites
Lee KP, Gopalan AI, Lee SH, Showkat AM, Nho YC |
| 3919 - 3926 |
Synthesis and properties of novel macromolecular coupling agents prepared by ATRP
Zhan HW, Jiang Y, Dong YQ, Li HT, Zhang K, Wang D, Wang JY |
| 3927 - 3933 |
Polyelectrolyt multilayers of poly(vinylamine hydrochloride-co-N-vinylformamide) with variable primary amine content and a weak polyacid poly(acrylic acid)
Serizawa T, Kawanishi N, Akashi M |
| 3934 - 3939 |
Rheological properties of high molecular weight (HMW) syndiotactic poly(vinyl alcohol) (PVA)/HMW atactic PVA blend solutions
Lyoo WS, Yeum JH, Kwon OW, Shin DS, Han SS, Kim BC, Jeon HY, Noh SK |
| 3940 - 3943 |
Development of dispersion in rubber-particle compounds in internal and continuous mixers
White JL, Liu D, Bumm SH |
| 3944 - 3948 |
A novel method to prepare a metallocene adduct catalyst with low moisture sensitivity
Wang HT, Chen W, Zheng G, Li HQ |
| 3949 - 3954 |
Compatibilization of PP/EPDM blends by grafting acrylic acid to polypropylene and epoxidizing the diene in EPDM
Ao YH, Sun SL, Tan ZY, Zhou C, Zhang HX |
| 3955 - 3962 |
Synthesis, characterization, and optoelectronic properties of two new polyfluorenes/poly(p-phenylenevinylene)s copolymers
Yu ZQ, Tan ST, Zou YP, Fan BH, Yuan ZL, Li YF |
| 3963 - 3971 |
Atomic force microscopy analysis of cellulose triacetate surface modified in low temperature argon plasma and its adhesion behavior
Koo K, Park YM, Yu JY |
| 3972 - 3977 |
Modified sulfonated poly(phthalazinone ether ketone) membranes with inorganic particles for potential applications in PEMFCs
Zhang HW, Zhu BK, Xu YY |
| 3978 - 3985 |
Sorption of CMID-containing cations on strongly basic anion exchangers
Drutsa R, Gutsanu V, Rusu V |
| 3986 - 3993 |
Thermostability and esterification of a polyethylene-immobilized lipase from Bacillus coagulans BTS-3
Kumar S, Ola RP, Pahujani S, Kaushal R, Kanwar SS, Gupta R |
| 3994 - 3999 |
Effects of polyaniline content in chlorrub-based coatings on corrosion protection of steel
Sathiyanarayanan S, Muthukrishnan S, Venkatachari G |
| 4000 - 4006 |
Surface modification of henequen (Agave fourcroydes) fibers by ultraviolet curing with 2-hydroxyethylacrylate and ethvlacrvlate: Effect of additives on degradable properties
Rahman MM, Chowdhury AMS, Islam MJ, Khan MA |
| 4007 - 4015 |
Influence of graphite particle size and shape on the properties of NBR
Yang J, Tian M, Jia QX, Zhang LQ, Li XL |
| 4016 - 4022 |
Effect of crosslinking concentration on mechanical and thermodynamic properties in acrylic acid-co-methyl methacrylate hydrogels
Katime I, de Apodaca ED, Rodriguez E |
| 4023 - 4029 |
Graft copolymerization of soybean protein isolate and methacrylic acid
Yang C, Song XQ, Sun C, Chen MQ, Xu YL, Liu XY, Ni ZB |
| 4030 - 4039 |
Sequential interpenetrating polymer networks of novolac resin and poly(n-butyl methacrylate)
Goswami S, Chakrabarty D |
| 4040 - 4044 |
Rheological properties in blends of poly(aryl ether ether ketone) and liquid crystalline poly(aryl ether ketone)
Chen J, Liu XC, Yang DC |
| 4045 - 4048 |
Monomer apparent reactivity ratios for acrylonitrile/methyl vinyl ketone copolymerization system
Hou C, Liu JS, Ji CN, Ying L, Sun HB, Wang CG |
| 4049 - 4057 |
Thermal behavior of poly(acrylic acid)-poly(vinyl pyrrolidone) and poly(acrylic acid)-metal-poly(vinyl pyrrolidone) complexes
Moharram MA, Khafagi MG |
| 4058 - 4065 |
Hydrophobically graded polyester polyol acrylate polymers: Synthesis, characterization, and microencapsulation of sulfamethoxazole for controlled release application
Nivasu MV, Tammishetti S |
| 4066 - 4074 |
Effect of ionic strength on the temperature-dependent behavior of hydroxypropyl methylcellulose solution and matrix tablet
Xu XM, Song YM, Ping QN, Wang Y, Liu XY |
| 4075 - 4084 |
Model of liquid permeability in swollen composites of superabsorbent polymer and fiber
Buchholz FL |
