| 1875 - 1884 |
Influence of Different Sterilization Procedures on the Morphological Parameters and Mechanical Properties of Ultra-High-Molecular-Weight Polyethylene
Archodoulaki VM, Koch T, Rodriguez A, Seidler S |
| 1885 - 1891 |
Phase Stability and Melting Behavior of the alpha and gamma Phases of Nylon 6
Zhang YZ, Zhang Y, Liu SW, Huang AP, Chi ZG, Xu JR, Economy J |
| 1892 - 1898 |
The Failure Behavior of a Polyurethane Composite Coating in 3.5% NaCl Solution under Ultraviolet Irradiation
He SP, Xiong JP, Tang YM, Zuo Y |
| 1899 - 1906 |
Synthesis and Characterization of Na-Alginate/Acrylamide Hydrogel and Its Application in Dye Removal
Gad YH, Aly RO, Abdel-Aal SE |
| 1907 - 1915 |
Preparation and Study of Thermal Properties of Phase Change Materials Based on Paraffin-Alumina-Filled Polyethylene
Vakhshouri AR, Akif A, Reyhan A, Gala M, Akif Q |
| 1916 - 1925 |
Cross-linking of Aqueous Base-Developable, Photosensitive Polynorbornene
Raeis-Zadeh M, Elce E, Knapp B, Kohl PA |
| 1926 - 1933 |
Structure and Mechanical Properties of Nanodispersed Fibrous Silicate-Reinforced Ethylene-Propylene-Diene Monomer Nanocomposites
Su LL, Zhang LQ, Yin S, Tian M |
| 1934 - 1941 |
Influence of Succinylation on the Properties of Cast Films from Red Bean Protein Isolate at Various Plasticizer Levels
Tang CH, Xiao ML, Chen Z, Yang XQ |
| 1942 - 1949 |
Correlations for Prediction of Specific Surface Area and Bulk and Apparent Densities of Porous Styrene-Divinylbenzene Copolymers
Nodehi A, Hajiebrahimi M, Parvazinia M, Shahrokhi M, Abedini H |
| 1950 - 1956 |
Effect of Boric Acid and Heat Treatment for the Formation of Poly(vinyl alcohol)/Iodine Complex Films Iodinated at Solution Before Casting
Shin EJ, Lyoo WS, Lee YH |
| 1957 - 1964 |
Synthesis and Characterization of Nylon-6/Mesoporous Silica Nanocomposites via In Situ Synchronous Hydrolytic Polymerization of Tetraethylorthosilicate and epsilon-Caprolactam
Li LJ, Yang GS |
| 1965 - 1973 |
Electrical Characterization of Polyaniline-Based Adhesive Blends
Desvergne S, Gasse A, Pron A |
| 1974 - 1983 |
Poly(ethylene-co-vinyl acetate)/Calcium Phosphate Nanocomposites: Mechanical, Gas Permeability, and Molecular Transport Properties
Thomas PS, Sreekumar PA, Aprem AS, Thomas S |
| 1984 - 1993 |
Influence of Backbone Rigidity on the Curing and the Dielectric Relaxations of Unsaturated Polyesters
Simitzis J, Triantou D, Soulis S, Tsangaris G, Zoumpoulakis L, Manolopoulos E |
| 1994 - 2000 |
Hyperbranched Polycarboxylates and Their Nanocomposites with ZnO: Investigations on the Humidity-Sensitive Properties
Li P, Li Y, Yang MJ |
| 2001 - 2007 |
Effect of Filler on the Compression Set, Compression Stress-Strain Behavior, and Mechanical Properties of Polysulfide Sealants
Lu Y, Zhang JS, Chang PS, Quan YW, Chen QM |
| 2008 - 2016 |
Vinyl-Addition Copolymerization of Norbornene and Polar Norbornene Derivatives Using Novel Bis(beta-ketoamino)Ni(II)/B(C6F5)(3)/AlEt3 Catalytic Systems
Zhou WH, He XH, Chen YW, Chen MQ, Shi L, Wu Q |
| 2017 - 2026 |
Efficacy of Hindered Amines in Woodflour-Polypropylene Composites Compatibilized with Vinyltrimethoxysilane After Accelerated Weathering and Moisture Absorption
Bouza R, Abad MJ, Barral L, Lasagabaster A, Pardo SG |
| 2027 - 2033 |
Overshooting Effect of Poly(Dimethylaminoethyl Methacrylate) Hydrogels
Li CC, Xu L, Zhai ML, Peng J, Li JQ |
| 2034 - 2040 |
Preparation and Characterization of High-Molecular-Weight Sericin by gamma Irradiation
Sung NY, Byun EB, Kwon SK, Yoo YC, Jung PM, Kim JH, Choi JI, Kim MR, Lee JW |
| 2041 - 2047 |
alpha-Al2O3 Improves the Properties of Gel Polyacrylonitrile Nanocomposite Electrolytes Used as Electrolyte Materials in Rechargeable Lithium Batteries
Hwang JJ, Peng HH, Yeh JM |
| 2048 - 2053 |
Enhancement of Photocatalytic Degradation Activity of Poly(Vinyl Chloride)-TiO2 Nanocomposite Film with Polyoxometalate
Yang CJ, Tian LH, Ye LQ, Peng TY, Deng KJ, Zan L |
| 2054 - 2062 |
Waterborne Polyurethane Dispersions Obtained by the Acetone Process: A Study of Colloidal Features
Sardon H, Irusta L, Fernandez-Berridi MJ, Luna J, Lansalot M, Bourgeat-Lami E |
| 2063 - 2073 |
The Effect of Soft Segment Content and Linker Length on Shape Recovery and Mechanical Properties of Laterally Linked Polyurethane Copolymer
Chung YC, Nguyen DK, Choi JW, Chun BC |
| 2074 - 2081 |
Synthesis and Liquid-Crystalline Properties of Poly(4-vinylpyridinium) Bromides N-Substituted with Dialkyloxyterphenyl Groups
Santos-Martell RG, Larios-Lopez L, Rodriguez-Gonzalez RJ, Donnio B, Guillon D, Navarro-Rodriguez D |
| 2082 - 2089 |
Simultaneous Synthesis, Stabilization, and Self-Assembly of Microscale Drug Particles in Polymer Films
Meng XX, Yang DC, Mitra S |
| 2090 - 2094 |
Crystallization and the Mechanical and Rheological Properties of Decrosslinked-Crosslinked-High-Density Polyethylenes Using a Supercritical Fluid
Cho HK, Hong SM, Koo CM |
| 2095 - 2102 |
The Effects of Intumescent Flame Retardant Including Ammonium Polyphosphate/Pentaerythritol and Fly Ash Fillers on the Physicomechanical Properties of Rigid Polyurethane Foams
Tarakcilar AR |
| 2103 - 2111 |
Preparation and Characterization of Triple Polymer-Coated Controlled-Release Urea With Water-Retention Property and Enhanced Durability
Tao SM, Liu J, Jin KM, Qiu XY, Zhang YA, Ren XQ, Hu SW |
| 2112 - 2121 |
Preparation and Characterization of UV-Curable, Boron-Containing, Transparent Hybrid Coatings
Mulazim Y, Kahraman MV, Apohan NK, Kiziltas S, Gungor A |
| 2122 - 2129 |
Dendrimer Finishing Influence on CO/PES Blended Fabrics Color Assessment
Colleoni C, Massafra MR, Migani V, Rosace G |
| 2130 - 2137 |
Synthesis and Characterization of Gelatin-Polydimethylsiloxane Graft Copolymers
Zhang M, Wu YJ, Zhang QS, Xia YM, Li TD |
| 2138 - 2145 |
Effect of the Cross-Linking Process on the Electrical Resistivity and Shape-Memory Behavior of Cross-Linked Carbon Black Filled Ethylene-Octene Copolymer
Le HH, Ali Z, Uthardt M, Ilisch S, Radusch HJ |
| 2146 - 2153 |
Synthesis and Characterization of Novel Optically Active Polyesters with High Thermal Stability
Ehsani S, Mehdipour-Ataei S, Mahmoodi A |
| 2154 - 2165 |
Electrospun Poly(L-lactide)/Poly(epsilon-caprolactone) Blend Fibers and Their Cellular Response to Adipose-Derived Stem Cells
Liao GY, Chen LA, Zeng XY, Zhou XP, Xie XL, Peng EJ, Ye ZQ, Mai YW |
| 2166 - 2172 |
Master Curve and Time-Temperature-Transformation Cure Diagram of a Polyfunctional Epoxy Acrylic Resin
Canamero-Martinez P, de la Fuente JL, Fernandez-Garcia M |
| 2173 - 2182 |
Investigation on the Correlation Between Rheology and Morphology of PA6/ABS Blends Using Ethylene Acrylate Terpolymer as Compatibilizer
Mojarrad A, Jahani Y, Barikani M |
| 2183 - 2190 |
Morphological and Thermal Evaluation of Soy Protein Concentrate on Graft Copolymerization with Ethylmethacrylate
Kaith BS, Jindal R, Bhatia JK |
| 2191 - 2200 |
Effect of Formulation Variables on Cure Kinetics, Mechanical, and Electrical Properties of Filled Peroxide Cured, Ethylene-propylene-diene Monomer Compounds
Sengupta S, Esseghir M, Cogen JM |
| 2201 - 2206 |
Surface Modification of Nylon 6 Films Treated with an He/O-2 Atmospheric Pressure Plasma Jet
Gao ZQ, Sun J, Peng SJ, Yao L, Qiu YP |
| 2207 - 2214 |
Improvement of the Photostabilization of PVC Films in the Presence of 2N-Salicylidene-5-(Substituted)-1,3, 4-Thiadiazole
Yousif E, Salih N, Salimon J |
| 2215 - 2221 |
Influence of Calix[2]-p-benzo[4]pyrrole on the Electrochemical Properties of Poly(ethylene oxide)-Based Electrolytes for Lithium Batteries
Stephan AM, Kumar TP, Angulakshmi N, Salini PS, Sabarinathan R, Srinivasan A, Thomas S |
| 2222 - 2232 |
Crystallinity of Polyamide 6 Staple Fibers in the Felt Structure Under Simulated Paper Machine Conditions
Hakala T, Harlin A |
| 2233 - 2241 |
Yttrium Barium Copper Oxide-Filled Polystyrene as a Dielectric Material
Abraham R, Kuryan S, Isac J, Zacharia AK, Thomas S |
| 2242 - 2250 |
Reactive Supercritical Fluid Extrusion for Development of Moisture Resistant Starch-Based Foams
Ayoub A, Rizvi SSH |
| 2251 - 2260 |
Effects of Compatibility Between Tackifier and Polymer on Adhesion Property and Phase Structure: Tackifier-Added Polystyrene-Based Triblock/Diblock Copolymer Blend System
Nakamura Y, Adachi M, Ito K, Kato Y, Fujii S, Sasaki M, Urahama Y, Sakurai S |
| 2261 - 2270 |
Effect of Compounding Sequence on the Morphology of Organoclay-Filled PA6/PP/MAPP Blends
Wang L, Guo ZX, Yu JA |
| 2271 - 2281 |
Miscibility Studies of Sodium Carboxymethylcellulose/Poly(Vinyl Alcohol) Blend Membranes for Pervaporation Dehydration of Isopropyl Alcohol
Prasad CV, Sudhakar H, Swamy BY, Reddy GV, Reddy CLN, Suryanarayana C, Prabhakar MN, Subha MCS, Rao KC |
| 2282 - 2291 |
Thermal and Dynamic Mechanical Properties of Vitamin E Infused and Blended Ultra-High Molecular Weight Polyethylenes
Puertolas JA, Martinez-Morlanes MJ, Mariscal MD, Medel FJ |
| 2292 - 2303 |
The Effects of Different Silane Crosslinking Approaches on Composites of Polyethylene Blends and Wood Flour
Clemons CM, Sabo RC, Hirth KC |
| 2304 - 2312 |
Flow Behavior in a Corotating Twin-Screw Extruder of Pure Polymers and Blends: Characterization by Fluorescence Monitoring Technique
Fang HX, Mighri F, Ajji A, Cassagnau P, Elkoun S |
| 2313 - 2323 |
Synthesis and Characterization of Novel Graft Copolymers by Radiation-Induced Grafting
Sanli LI, Gursel SA |
| 2324 - 2336 |
Synergistic Blends of Natural Polymers, Pectin and Sodium Alginate
Gohil RM |
| 2337 - 2345 |
Electrospinning Fabrication and Characterization of Poly(vinyl alcohol)/Waterborne Polyurethane Nanofiber Membranes in Aqueous Solution
Yang JH, Yoon NS, Park JH, Kim IK, Cheong IW, Deng YL, Oh W, Yeum JH |
| 2346 - 2353 |
Effect of Hydrophobic Comonomer Content on Assembling of Poly (N-isopropylacrylamide) and Thermal Properties
Yang X, Lee HY, Kim JC |
| 2354 - 2360 |
Microwave-Assisted Synthesis of Polyglycerol from Glycerol Carbonate
Iaych K, Dumarcay S, Fredon E, Gerardin C, Lemor A, Gerardin P |
| 2361 - 2367 |
Dynamics of In Situ Synthetized Silver-Epoxy Nanocomposites as Studied by Dielectric Relaxation Spectroscopy
Kortaberria G, Arruti P, Mondragon I, Vescovo L, Sangermano M |
| 2368 - 2373 |
Stretching-Induced Percolation in Polyvinylidene Fluoride and Nickel Composites
Yu LJ, Li WP |
| 2374 - 2380 |
Controlled Release of Berberine Hydrochloride from Alginate Microspheres Embedded Within Carboxymethyl Chitosan Hydrogels
Zhu AM, Chen JH, Liu QL, Jiang YL |
| 2381 - 2389 |
Polyamides Obtained by Direct Polycondesation of 4-[4-[9-[4-(4-Aminophenoxy)-3-methyl-phenyl] fluoren-9-YL]-2-methyl-phenoxy]aniline with Dicarboxylic Acids Based on a Diphenyl-Silane Moiety
Tundidor-Camba A, Terraza CA, Tagle LH, Coll D |
| 2390 - 2399 |
Star-Shape Poly(acrylic acid)-Composed Glass-Ionomer Cements: Effects of MW and Arm Number on Mechanical Properties
Zhao J, Weng YM, Xie D |
| 2400 - 2410 |
Study of Rheological Behavior During the Recovery Process of High Impact Polystyrene Using Cross-WLF Model
Peydro MA, Parres F, Crespo JE, Juarez D |
| 2411 - 2420 |
Tailored Thermal and Mechanical Properties of Epoxy Resins Prepared Using Multiply Hydrogen-Bonding Reactive Modifiers
Liu JK, Shau SM, Juang TY, Chang CC, Dai SHA, Su WC, Lin CH, Jeng RJ |
| 2421 - 2427 |
Inverted Emulsion Polymerization Route to Polyaniline-3D Nanofiber Network Using Sulfonated-p-Cresol as Novel Dopant
Saravanan C, Palaniappan S, Akhila V, Madhavendra SS, Bangal PR |
| 2428 - 2433 |
Thermoplastic Corn Starch Reinforced with Cotton Cellulose Nanofibers
Teixeira ED, Lotti C, Correa AC, Teodoro KBR, Marconcini JM, Mattoso LHC |
| 2434 - 2439 |
Antifungal Activity of Chitosan against Fusarium oxysporum f. sp cubense
Al-Hetar MY, Abidin MAZ, Sariah M, Wong MY |
| 2440 - 2447 |
Effect of Tetraphenylphenyl-Modified Fumed Silica on Silicone Rubber Radiation Resistance
Diao S, Zhang SY, Yang ZZ, Feng SY, Zhang CQ, Wang ZH, Wang GG |
| 2448 - 2458 |
Novel Amphiphilic Dextran Copolymers Nanoparticles for Delivery of Doxorubicin
Gao HX, Li MJ, Wu Y |
| 2459 - 2467 |
Design and Preparation of Cross-Linked alpha-Methylstyrene-Acrylonitrile Copolymer Nano-Particles for Elastomer Reinforcement
Lu M, Zhou JJ, Wang LS, Zhao W, Lu YL, Zhang LQ, Liu YK |
| 2468 - 2476 |
UV Aging Resistance Properties of PBO Fiber Coated with Nano-ZnO Hybrid Sizing
Zhang CH, Huang YD, Yuan WJ, Zhang JN |
| 2477 - 2484 |
Preparation and Biodegradation of Hydroxyl Terminated Poly(fumaric acid-co-diethylene glycol) and Its Segmented Polyurethane
Yang Q, Shao FJ, Lu DN, Kimura Y |
| 2485 - 2495 |
Properties of Polystyrene/Organically Modified Layered Double Hydroxide Nanocomposites Synthesized by Solvent Blending Method
Sahu B, Pugazhenthi G |
