| 2063 - 2068 |
Natural rubber-isotactic polypropylene thermoplastic blends
Varghese S, Alex R, Kuriakose B |
| 2069 - 2075 |
Hydrophobic properties of ethylene-vinyl alcohol copolymer treated with plasma source ion implantation
Kim KB, Sung WM, Park HJ, Lee YH, Han SH, Kim WJ |
| 2076 - 2081 |
Ion-conducting polymer gels of polyacrylamide embedded with K2CO3
Song WS, Wang YX, Deng HN |
| 2082 - 2092 |
Preparation of porous poly(D,L-lactide) and poly(D,L-lactide-co-glycolide) membranes by a phase inversion process and investigation of their morphological changes as cell culture scaffolds
Kim SY, Kanamori T, Noumi Y, Wang PC, Shinbo T |
| 2093 - 2100 |
A phosphorus-containing diamine for flame-retardant, high-functionality epoxy resins. I. Synthesis, reactivity, and thermal degradation properties
Liu WC, Varley RJ, Simon GP |
| 2101 - 2115 |
Nanocomposites of poly(methyl methacrylate) and organically modified layered silicates by melt intercalation
Shen ZQ, Simon GP, Cheng YB |
| 2116 - 2124 |
Concanavalin a attached poly(p-chloromethylstyrene) beads for glycoenzyme separation
Bahar T, Tuncel A |
| 2125 - 2131 |
Preparation and thermal analysis of cotton-clay nanocomposites
White LA |
| 2132 - 2143 |
Alkali-methanol-anthraquinone pulping of Miscanthus x giganteus for thermoplastic composite reinforcement
Lundquist L, Arpin G, Leterrier Y, Berthold F, Lindstrom M, Manson JAE |
| 2144 - 2150 |
Synthesis and material properties of syndiotactic polystyrene/organophilic clay nanocomposites
Kim MH, Park CI, Choi WM, Lee JW, Lim JG, Park OO, Kim JM |
| 2151 - 2154 |
C-13-NMR study of Dipteryx Alata Vogel starch
Tavares MIB, Bathista ALBS, Silva EO, Costa PM, Filho NP, Nogueira JS |
| 2155 - 2162 |
Structural characterization of reactor blends of polypropylene and ethylene-propylene rubber
Pires M, Mauler RS, Liberman SA |
| 2163 - 2168 |
Studies on the synthesis and thermal properties of copoly(L-lactic acid/glycolic acid) by direct melt polycondensation
Lan P, Zhang YP, Gao QW, Shao HL, Hu XC |
| 2169 - 2178 |
Analysis of failure of crosslinked polyethylene cables because of electrical treeing: A physicochemical approach
Sarathi R, Das S, Kumar CRA, Velmurugan R |
| 2179 - 2188 |
Effect of some service conditions on the electrical resistivity of conductive styrene-butadiene rubber-carbon black composites
Mohanraj GT, Chaki TK, Chakraborty A, Khastgir D |
| 2189 - 2195 |
Atom-transfer radical polymerization of methyl methacrylate with alpha,alpha'-dichloroxylene/CuCl/N,N,N',N'',N''-pentamethyldiethylenetriamine initiation system under microwave irradiation
Li X, Zhu XL, Cheng ZP, Xu WJ, Chen GJ |
| 2196 - 2202 |
Spectroscopic study of the modification of cellulose with polyethylenimines
de la Orden MU, Matias MC, Urreaga JM |
| 2203 - 2210 |
Free-radical grafting of acrylic acid onto isotactic polypropylene using styrene as a comonomer in supercritical carbon dioxide
Dong QZ, Liu Y |
| 2211 - 2219 |
Preparation and properties of elastic polyimide-silica composites using silanol sol from water glass
Inoue SI, Morita K, Asai K, Okamoto H |
| 2220 - 2227 |
Rheological, electrical, and microwave properties of polymers with nanosized carbon particles
Kotsilkova R, Nesheva D, Nedkov I, Krusteva E, Stavrev S |
| 2228 - 2231 |
Material characterization of a high-dielectric-constant polymer-ceramic composite for embedded capacitor for RF applications
Rao Y, Wong CP |
| 2232 - 2239 |
Amphibious water-soluble copolymer. I. Its synthesis and dispersing ability on barium titanate
Chen LP, Ying KL, Hsu KC |
| 2240 - 2252 |
Ketone derivatives of diels-alder adducts of levopimaric acid with acrylic acid and maleic anhydride: Synthesis, characterization, and polymerization
Bicu I, Mustata F |
| 2253 - 2260 |
Reduction of offensive odor from natural rubber by odor-reducing substances
Hoven VP, Rattanakarun K, Tanaka Y |
| 2261 - 2268 |
Effects of water on the curing and properties of epoxy adhesive used for bonding FRP composite sheet to concrete
Wu LX, Hoa SV, Ton-That MT |
| 2269 - 2277 |
Enhancement of corrosion protection effect of poly(styrene-co-acrylonitrile) by the incorporation of nanolayers of montmorillonite clay into copolymer matrix
Yeh JM, Liou SJ, Lu HJ, Huang HY |
| 2278 - 2283 |
Synthetic, structural, and thermal degradation of a tercopolymer derived from salicylic acid, guanidine, and formaldehyde
Michael PEP, Lingala PS, Juneja HD, Paliwal LJ |
| 2284 - 2294 |
Pervaporation of 1,2-dimethoxyethane from aqueous solutions by crosslinked oligosilylstyrene-poly(dimethylsiloxane) composite membranes
Liang L, Dickson JM, Jiang JX, Brook MA |
| 2295 - 2302 |
Sound absorption properties of thermally bonded nonwovens based on composing fibers and production parameters
Lee YE, Joo CW |
| 2303 - 2311 |
Melt grafting of 10-undecenoic acid onto linear low density polyethylene
Ciolino A, Valles EM, Failla MD |
| 2312 - 2317 |
The study of poly(styrene-co-p-(hexafluoro-2-hydroxylisopropyl)-alpha-methylstyrene)/poly(ethylene oxide) blends
Chen SM, Qiu FR, Tan L |
| 2318 - 2325 |
Proton exchange membranes by grafting of styrene-acrylic acid onto FEP by preirradiation technique. II. Physicochemical properties of the membrane and its sulfonated derivatives
Phadnis S, Patri M, Hande VR, Roychoudhury S, Deb PC |
| 2326 - 2333 |
Flame retardancy of poly(butylene terephthalate) blended with phosphorous compounds
Ishikawa T, Maki I, Takeda K |
| 2334 - 2340 |
Preparation of narrowly distributed nanoparticles of poly(n-butyl methacrylate-co-vinyl pyrrolidone) through microemulsion polymerization
He WD, Ye FM, Wang YM, Li LF |
| 2341 - 2350 |
Surface modification of poly(propylene) by photoinitiators: Improvement of adhesion and wettability
Castell P, Wouters M, de With G, Fischer H, Huijs F |
| 2351 - 2356 |
Thermal stability of native polybutylene terephthalate
Shelgaev VN, Mikitaev AK, Lomakin SM, Zaikov GE, Koverzanova EV |
| 2357 - 2362 |
Reactive processing of nonmiscible polymers: Shear rate effect
David JC, Chalamet Y, Taha M |
| 2363 - 2368 |
Depolymerization of poly(trimethylene terephthalate) in supercritical methanol
Zhang HH, Xiang HW, Yang Y, Xu YY, Li YW |
| 2369 - 2374 |
Absorption of trioctyl trimellitate into mass-polymerization and suspension-polymerization poly(vinyl chloride)
Luo YX, Dai GC |
| 2375 - 2386 |
Phosphonate-containing bismaleimide resins. II. Preparation and characteristics of reactive blends of phosphonate-containing bismaleimide and epoxy
Shu WJ, Chin WK, Chiu HJ |
| 2387 - 2394 |
Advances in stereolithography: A new experimental technique in the production of a three-dimensional plastic model with an infrared laser
Jardini ALM, Maciel RF, Scarparo MAF, Andrade SR, Moura LFM |
| 2395 - 2401 |
Mechanism study on surface activation of surfactant-modified polyvinyl siloxane impression materials
Lee DY, Oh YI, Chung KH, Kim KM, Kim KN |
| 2402 - 2410 |
Significant decreased dielectric constant and loss of polystyrene-clay nanocomposite materials by using long-chain intercalation agent
Wang HW, Chang KC, Chu HC, Liou SJ, Yeh JM |
| 2411 - 2414 |
Investigation of ZnO-release Behavior of poly(N-isopropylacrylamide-co-maleic acid)/ZnO composite hydrogels by differential pulse polarography
Inam R, Caykara T, Akkoc S, Kantoglu O |
| 2415 - 2419 |
Microwave-assisted synthesis of high-molecular-weight poly(ether imide)s by phase-transfer catalysis
Gao CL, Zhang SB, Gao LX, Ding MX |
| 2420 - 2424 |
Frictional study of woven fabrics: The relationship between the friction and velocity of testing
Hermann D, Ramkumar SS, Seshaiyer P, Parameswaran S |
| 2425 - 2430 |
Mechanical and dynamical mechanical properties of chloroprene rubber and cellulose II composites
Martins AF, de Meneses SM, Visconte LLY, Nunes RCR |
| 2431 - 2441 |
Compatibilization efficiency of styrene-butadiene triblock copolymers in polystyrene-polypropylene blends with varying compositions
Hlavata D, Hromadkova J, Fortelny I, Hasova V, Pulda J |
| 2442 - 2449 |
Melt grafting of n-butyl methacrylate onto poly(vinyl chloride): Synthesis and characterization
Maiti AK, Choudhary MS |
| 2450 - 2457 |
Studies of sulfonated polyethylene for biliary stent application
Peng MC, Lin JC, Chen CY, Wu JJ, Lin XZ |
| 2458 - 2467 |
Combined experimental and computer simulation study of the kinetics of solute release from a relaxing swellable polymer matrix. I. Characterization of non-Fickian solvent uptake
Papadokostaki KG, Petrou JK |
| 2468 - 2479 |
Combined experimental and computer simulation study of the kinetics of solute release from a relaxing swellable polymer matrix. II. Release of an osmotically active solute
Papadokostaki KG |
| 2480 - 2485 |
Tl(III) initiated polymerization of methyl methacrylate in micellar phase
Patra M, Behera AK, Behera RK, Sinha BK |
| 2486 - 2493 |
Synthesis and characterization of new soluble poly(ester-imide)s containing noncoplanar 2,2'-dimethyl-4,4'-biphenylene unit
Liaw DJ, Fan CL, Lin CC, Wang KL |
| 2494 - 2503 |
Influence of the comonomers (styrene and methyl acrylate) on the rate of photocrosslinking of 4-{[-3-(4-hydroxybenzylidene)-2-oxocyclohexylidene]methyl}-phenyl acrylate
Arun A, Reddy BSR |
| 2504 - 2513 |
Kinetics of polymerization of dimer fatty acids with ethylenediamine
Heidarian J, Ghasem NM, Daud WMAW |
| 2514 - 2521 |
Effect of poly(propylene carbonate) on the crystallization and melting behavior of poly(beta-hydroxybutyrate-co-beta-hydroxyvalerate)
Li J, Lai F, Liu JJ |
| 2522 - 2527 |
Complexation of poly(dimethylsiloxane)/poly(methyl methacrylate-co-butyl acrylate-co-methacrylic acid) latex with poly(dimethylsiloxane)/poly(vinyl acetate-co-butyl acrylate) latex
Yang MJ, Dan Y |
| 2528 - 2537 |
Oxygen permeation resistance of polyethylene, polyethylene/ethylene vinyl alcohol copolymer, polyethylene/modified ethylene vinyl alcohol copolymer, and polyethylene/modified polyamide-ethylene vinyl alcohol copolymer bottles
Yeh JT, Huang SS, Yao WH, Wang IJ, Chen CC |
| 2538 - 2544 |
Studies on poly(styrene-co-maleic anhydride)-modified polyesteramide-based anticorrosive coatings synthesized from a sustainable resource
Zafar F, Sharmin E, Ashaf SM, Ahmad S |
| 2545 - 2551 |
Mechanical properties of polystyrene/polyamide 6 blends compatibilized with the ionomer poly(styrene-co-sodium acrylate)
Villarreal ME, Tapia M, Nuno-Donlucas SM, Puig JE, Gonzalez-Nunez R |
| 2552 - 2557 |
Synthesis and property of hydrogel membranes consisting of fumaramate with phosphorylcholine group
Oishi T, Yamasaki H, Onimura K, Fukushima T, Morihashi S |
| 2558 - 2568 |
The fractal analysis of curing processes of epoxy resins
Kozlov GV, Bejev AA, Lipatov YS |
| 2569 - 2576 |
Dependency of thermal and mechanical properties on the composition of mixed-substituent poly(fluoroalkoxyphosphazenes)
Maher AE, Ambler CM, Powell ES, Allcock HR |
| 2577 - 2580 |
Preparation of composites of polymer liquid crystal/cholesteric liquid crystal and their photochemical switching and memory properties by photoisomerization of a chiral azobenzene molecule
Kurihara S, Yoshioka T, Zahangir AM, Ogata T, Nonaka T |
| 2581 - 2592 |
Effect of Epolene E-43 as a compatibilizer on the mechanical properties of palm fiber-poly(propylene) composites
Abu-Sharkh BF, Kahraman R, Abbasi SH, Hussein IA |
| 2593 - 2598 |
Investigation on the kinetic mechanism of structure healing for block copolymer materials after large elongation
Wang Y, Wang BS, Shen JS |
| 2599 - 2605 |
New polyurethane cationomers with naphthyl and phenyltriazene pendants: Synthesis and properties
Buruiana EC, Niculescu V, Buruiana T |
| 2606 - 2611 |
Influence of acrylonitrile-butadiene-styrene (ABS) morphology and polystyrene-co-acrylonitrile) (SAN) content on fracture behavior of ABS/SAN blends
Yamakawa RS, Correa CA, Hage E |
| 2612 - 2620 |
Temperature/pH-sensitive comb-type graft hydrogels composed of chitosan and poly(N-isopropylacrylamide)
Lee SB, Ha DI, Cho SK, Kim SJ, Lee YM |
| 2621 - 2628 |
Evolution of electrooptical properties of epoxy-amine thermoset/liquid crystal blends during polymerization after the gel point of the polymer matrix
Sannier L, Siddiqi HM, Maschke U, Dumon M |
| 2629 - 2636 |
Resistivity of conductive polymer-coated fabric
Lekpittaya P, Yanumet N, Grady BP, O'Rear EA |
| 2637 - 2641 |
Surface treatments of subdenier monofilament polypropylene fibers to optimize their reinforcing efficiency in cementitious composites
Pei MS, Wang DJ, Zhao Y, Hu XB, Xu YZ, Wu JG, Xu DF |
| 2642 - 2652 |
Radiation synthesis and characterization of poly(N-vinyl-2-pyrrolidone/acrylic acid) and poly(N-vinyl-2-pyrrolidone/acrylamide) hydrogels for some metal-ion separation
Hegazy ESA, El-Aal SEA, Abou Taleb MF, Dessouki AM |
| 2653 - 2657 |
Analysis of stability of food emulsions by Eyring's theory: Influence of different biopolymers
Dolz M, Hernandez MJ, Cabeza C, Casanovas A, Delegido J |
| 2658 - 2664 |
Syntheses and biodegradability of benzylated waste pulps and graft copolymers from PBzs and L-lactic acid
Hadano S, Maehara S, Onimura K, Yamasaki H, Tsutsumi H, Oishi T |
| 2665 - 2674 |
Structure of resorcinol, phenol, and furan resins by MALDI-TOF mass spectrometry and C-13 NMR
Pizzi A, Pasch H, Simon C, Rode K |
| 2675 - 2680 |
Morphology and thermodynamic analysis of composite polymer particles prepared by soap-free emulsion polymerization in the presence of poly(methyl methacrylate) and polystyrene as biseeds
Pang XS, Cheng GX, Lu SL |
| 2681 - 2688 |
Pore structure of water-wettable hydrophobic resins based on divinylbenzene and methyl acrylate
Wei J, Zhao X, Yan J |
| 2689 - 2692 |
Relation between strain hardening and wear resistance of polymers
Mergler YJ, Schaake RP |
| 2693 - 2697 |
Synthesis and lyotropic behavior of mesogen-linked cellulose acetates
Wu CC, Gu QC, Zhang RB, Huang Y, Chen SX |
| 2698 - 2705 |
Interaction of poly(maleic anhydride-alt-acrylic acid) with transition metal cations, Ni2+, Cu2+, and Cd2+: A study by UV-Vis spectroscopy and viscosimetry
Kavlak S, Can HK, Guner A |
| 2706 - 2713 |
Effect of chitin addition on injection-molded thermoplastic corn starch
Rosa RCRS, Andrade CT |
| 2714 - 2723 |
Nanocomposites of poly(vinyl chloride) and nanometric calcium carbonate particles: Effects of chlorinated polyethylene on mechanical properties, morphology, and rheology
Wu DZ, Wang XD, Song YZ, Jin RG |
| 2724 - 2732 |
Simultaneous multiple sample light scattering for analysis of polymer solutions
Drenski MF, Reed WF |
| 2733 - 2739 |
Synthesis and pyrolysis of Ti-containing precursors for advanced Si/C/N/Ti-based ceramics
Zheng ZM, Li YM, Luo YM, Su SX, Zhang ZJ, Yang SY, Gao W, Xie ZM |
| 2740 - 2741 |
Appropriate use of Fick's equation to compute diffusion coefficients in pervaporation experiments
Naidu BVK, Shetty LC, Aminabhavi TM |
| 2742 - 2742 |
Efficient method for recycling poly(ethylene terephthalate) to poly(butylene terephthalate) using transesterification reaction (vol 91, pg 3720, 2004)
Kulkarni NG, Avadhani CV, Sivaram S |
| 2743 - 2743 |
Direct fluorination of the polyimide matrimid (R) 5218: The formation kinetics and physicochemical properties of the fluorinated layers (vol 92, pg 6, 2004)
Kharitonov AP, Moskvin YL, Syrtsova DA, Starov VM, Teplyakov VV |
| 2744 - 2745 |
Effect of interfacial stress on the crystalline structure of the matrix and the mechanical properties of high-density polyethylene/CaCO3 blends (vol 89, pg 2120, 2003)
Zhang YC, Pan EL |
